Re: System still hangs with "ata1-master: TIMEOUT - SETFEATURES SET TRANSFER MODE"

Il Mar, 2004-01-27 alle 15:17, Panagiotis Astithas ha scritto:
> Lefteris Chatzibarbas wrote:
> > Hello,
> > 
> > Devices are:
> > 
> >   ad0: <WDC WD800JB-00ETA0/77.07W77> ATA-6 disk at ata0-master
> >   acd0: <DV-516E/3.04> DVDROM drive at ata1 as master
> >   acd1: <CD-W524E/1.0A> CDRW drive at ata1 as slave
> > 
> > Verbose boot of a good kernel:
> > 
> >   http://members.hellug.gr/lefcha/dmesg.out
> > 
> > System still hangs during boot with the message:
> > 
> >   ata1-master: TIMEOUT - SETFEATURES SET TRANSFER MODE retrying (0 retries left)
> > 
> > ... and verbose boot:
> > 
> >   ata1: reiniting channel ..
> >   ata1: reset tp1 mask=03 ostat0=50 ostat1=50
> >   ata1-master: stat=0x10 err=0x01 lib=0x14 msb=0xeb
> >   ata1-slave: stat=0x10 err=0x01 lib=0x14 msb=0xeb
> >   ata1: reset tp2 mask=03 stat0=10 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
> >   ata1: resetting done ..
> >   ata1-slave: pio=0x0c wdma=0x22 udma=0x42 cable=80pin
> >   ata1: reiniting channel ..
> >   ata1: reset tp1 mask=03 ostat0=50 ostat1=50
> >   ata1-master: stat=0x10 err=0x01 lib=0x14 msb=0xeb
> >   ata1-slave: stat=0x10 err=0x01 lib=0x14 msb=0xeb
> >   ata1: reset tp2 mask=03 stat0=10 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
> >   ata1: resetting done ..
> >   ata1-slave: pio=0x0c wdma=0x22 udma=0x42 cable=80pin
> > 
> > Soren Schmidt's commit 2004/01/19 07:20:00 PST:
> > 
> >   1.202     +2 -1      src/sys/dev/ata/ata-all.c
> >   1.71      +1 -1      src/sys/dev/ata/ata-all.h
> >   1.17      +23 -21    src/sys/dev/ata/ata-queue.c
> >   1.161     +1 -1      src/sys/dev/ata/atapi-cd.c
> > 
> > ... or:
> > 
> >   http://lists.freebsd.org/pipermail/cvs-src/2004-January/016880.html
> > 
> > ... didn't correct the problem.
> > 
> > Thanks
> 
> "Me too".
> Same controller, same hard disk, only one device on the second channel:
> acd0: DVDROM <DVD-ROM DDU1621> at ata1-master UDMA33
> I used 5.2-RELEASE and the -current snapshot form 24/1. The former 
> freezes after the "TIMEOUT" message, the latter just locks up solid. The 
> machine runs happily a -current from last October though.

here too :|
It should be:
ata1-master: WARNING - SETFEATURES recovered from missing interrupt
ata1-master: WARNING - SETFEATURES recovered from missing interrupt
acd0: CDRW <LITE-ON LTR-48125W> at ata1-master UDMA33

(it's probably a timing issue, since i don't get interrupts)
-- 
Rionda aka Matteo Riondato
G.U.F.I Staff Member (http://www.gufi.org)
BSD-FAQ-it Main Developer (http://www.gufi.org/~rionda)
GPG key at: http://www.riondabsd.net/riondagpg.asc
Sent from: kaiser.sig11.org running FreeBSD-5.2-CURRENT