On Friday 02 July 2004 10:50 am, Andrew Gallatin wrote: > Beecher Rintoul writes: > > That also worked on my box. Thanks everyone. > > What was your box? Was it also Serverworks based? If not, you might > want to let sos_at_ and warner_at_ know what sort of box it is.. > > Drew The box is an HP Vectra VL 400MHz - 256MB Ram - UDMA 33, and has been very stable runnning -current. northwindcom# dmesg Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2-CURRENT #8: Fri Jul 2 10:28:01 AKDT 2004 root_at_northwindcom:/usr/obj/usr/src/sys/NOVA Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Pentium II/Pentium II Xeon/Celeron (400.16-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x665 Stepping = 5 Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR> real memory = 268369920 (255 MB) avail memory = 257024000 (245 MB) npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> at pcibus 0 on motherboard pir0: <PCI Interrupt Routing Table: 7 Entries> on motherboard pci0: <PCI bus> on pcib0 agp0: <SiS 620 host to AGP bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0 atapci0: <SiS 620 UDMA66 controller> port 0xdcf0-0xdcff,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 0.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 isab0: <PCI-ISA bridge> at device 1.0 on pci0 isa0: <ISA bus> on isab0 pci0: <unknown> at device 1.1 (no driver attached) ohci0: <SiS 5571 USB controller> mem 0xfedff000-0xfedfffff irq 11 at device 1.2 on pci0 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: <SiS 5571 USB controller> on ohci0 usb0: USB revision 1.0 uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pcib1: <PCI-PCI bridge> at device 2.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) pci0: <multimedia, audio> at device 6.0 (no driver attached) rl0: <D-Link DFE-530TX+ 10/100BaseTX> port 0xd400-0xd4ff mem 0xfedfd800-0xfedfd8ff irq 3 at device 11.0 on pci0 miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: Ethernet address: 00:0d:88:26:95:20 rl0: [GIANT-LOCKED] rl1: <D-Link DFE-530TX+ 10/100BaseTX> port 0xd800-0xd8ff mem 0xfedfdc00-0xfedfdcff irq 9 at device 12.0 on pci0 miibus1: <MII bus> on rl1 rlphy1: <RealTek internal media interface> on miibus1 rlphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl1: Ethernet address: 00:0d:88:26:ce:07 rl1: [GIANT-LOCKED] cpu0 on motherboard orm0: <Option ROMs> at iomem 0xe8000-0xeffff,0xc0000-0xc7fff on isa0 pmtimer0 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model IntelliMouse, device ID 3 fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 unknown: <PNP0303> can't assign resources (port) psmcpnp0: irq resource info is missing; assuming irq 12 unknown: <PNP0501> can't assign resources (port) unknown: <PNP0700> can't assign resources (port) unknown: <PNP0400> can't assign resources (port) Timecounter "TSC" frequency 400159529 Hz quality 800 Timecounters tick every 10.000 msec IP Filter: v3.4.35 initialized. Default = pass all, Logging = enabled ata0-master: DMA limited to UDMA33, non-ATA66 cable or device ad0: 19092MB <WDC WD200BB-00DEA0> [38792/16/63] at ata0-master UDMA33 acd0: CDROM <HITACHI CDR-7930> at ata1-master PIO3 Mounting root from ufs:/dev/ad0s1a northwindcom# The patch is working fine. Beech --------------------------------------------------------------------------------------- Beech Rintoul - System Administrator - akbeech_at_northwindcom.dyndns.org /"\ ASCII Ribbon Campaign | NorthWind Communications \ / - NO HTML/RTF in e-mail | 201 East 9th Avenue Ste.310 X - NO Word docs in e-mail | Anchorage, AK 99501 / \ ---------------------------------------------------------------------------------------Received on Fri Jul 02 2004 - 17:45:18 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:00 UTC