Hi guys I've been hoping this was temporary instability, but it appears to be here to stay. My Toshiba Libretto (ToPIC97 chipset) hangs hard on boot at a random time with recent currents. Ie the hang can happen while the probes are still happening or it can happen while the rc scripts are running. I never get as far as being able to log in. This happens with a range of BIOS options, and also with ACPI disabled. I have the latest BIOS for my laptop (8.10). I have tried it with no cards in the PCMCIA/CardBus slots to no avail. The hang symptom is a hard hang with no keyboard response; I need to hit reset or do a power-down. Enclosed is output from dmesg. Any suggestions? M -- Mark Murray iumop ap!sdn w,I idlaH Preloaded elf kernel "/boot/kernel/kernel" at 0xc0787000. Preloaded elf module "/boot/kernel/linux.ko" at 0xc07872a0. Preloaded elf module "/boot/kernel/sysvshm.ko" at 0xc078734c. Preloaded elf module "/boot/kernel/sysvsem.ko" at 0xc07873f8. Preloaded elf module "/boot/kernel/sysvmsg.ko" at 0xc07874a4. Preloaded elf module "/boot/kernel/if_dc.ko" at 0xc0787550. Preloaded elf module "/boot/kernel/miibus.ko" at 0xc07875fc. Preloaded elf module "/boot/kernel/snd_mss.ko" at 0xc07876a8. Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc0787754. Preloaded elf module "/boot/kernel/random.ko" at 0xc0787800. Preloaded elf module "/boot/kernel/nfsserver.ko" at 0xc07878ac. Preloaded elf module "/boot/kernel/nfsclient.ko" at 0xc078795c. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0787a0c. Calibrating clock(s) ... i8254 clock: 1193071 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 233289419 Hz CPU: Pentium/P55C (quarter-micron) (233.29-MHz 586-class CPU) Origin = "GenuineIntel" Id = 0x581 Stepping = 1 Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX> real memory = 67174400 (64 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000829000 - 0x0000000003ebefff, 57237504 bytes (13974 pages) avail memory = 60276736 (57 MB) bios32: Found BIOS32 Service Directory header at 0xc00f8e20 bios32: Entry = 0xfe95a (c00fe95a) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0xc5f8 pnpbios: Found PnP BIOS data at 0xc00f8e30 pnpbios: Entry = f0000:90a8 Rev = 1.0 pnpbios: Event flag at 510 pnpbios: OEM ID c932f351 Other BIOS signatures found: Intel Pentium detected, installing workaround for F00F bug null: <null device, zero device> random: <entropy source, Software, Yarrow> mem: <memory & I/O> npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <TOSHIB 750> on motherboard acpi0: [GIANT-LOCKED] ACPI-0438: *** Error: Looking up [\\_SB_.SBAT] in namespace, AE_NOT_FOUND SearchNode 0xc0d8a780 StartNode 0xc0d8a780 ReturnNode 0 ACPI-1303: *** Error: [NULL NAME], AE_NOT_FOUND acpi0: Power Button (fixed) atpic: Ignoring invalid level/low configuration for IRQ13 ACPI timer looks BAD min = 0, max = 4, width = 4 ACPI timer looks GOOD min = 0, max = 2, width = 2 ACPI timer looks GOOD min = 0, max = 2, width = 2 ACPI timer looks GOOD min = 0, max = 2, width = 2 ACPI timer looks GOOD min = 0, max = 2, width = 2 ACPI timer looks GOOD min = 0, max = 2, width = 2 ACPI timer looks GOOD min = 0, max = 2, width = 2 ACPI timer looks GOOD min = 0, max = 2, width = 2 ACPI timer looks GOOD min = 0, max = 2, width = 2 ACPI timer looks GOOD min = 0, max = 2, width = 2 Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2-CURRENT #6: Sat Jul 3 22:30:52 BST 2004 root_at_grimreaper.grondar.org:/usr/src/sys/i386/compile/LIBRETTO Preloaded elf kernel "/boot/kernel/kernel" at 0xc0787000. Preloaded elf module "/boot/kernel/linux.ko" at 0xc07872a0. Preloaded elf module "/boot/kernel/sysvshm.ko" at 0xc078734c. Preloaded elf module "/boot/kernel/sysvsem.ko" at 0xc07873f8. Preloaded elf module "/boot/kernel/sysvmsg.ko" at 0xc07874a4. Preloaded elf module "/boot/kernel/if_dc.ko" at 0xc0787550. Preloaded elf module "/boot/kernel/miibus.ko" at 0xc07875fc. Preloaded elf module "/boot/kernel/snd_mss.ko" at 0xc07876a8. Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc0787754. Preloaded elf module "/boot/kernel/random.ko" at 0xc0787800. Preloaded elf module "/boot/kernel/nfsserver.ko" at 0xc07878ac. Preloaded elf module "/boot/kernel/nfsclient.ko" at 0xc078795c. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0787a0c. Calibrating clock(s) ... i8254 clock: 1193069 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 233288786 Hz CPU: Pentium/P55C (quarter-micron) (233.29-MHz 586-class CPU) Origin = "GenuineIntel" Id = 0x581 Stepping = 1 Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX> real memory = 67174400 (64 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000829000 - 0x0000000003ebefff, 57237504 bytes (13974 pages) avail memory = 60276736 (57 MB) bios32: Found BIOS32 Service Directory header at 0xc00f8e20 bios32: Entry = 0xfe95a (c00fe95a) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0xc5f8 pnpbios: Found PnP BIOS data at 0xc00f8e30 pnpbios: Entry = f0000:90a8 Rev = 1.0 pnpbios: Event flag at 510 pnpbios: OEM ID c932f351 Other BIOS signatures found: Intel Pentium detected, installing workaround for F00F bug null: <null device, zero device> random: <entropy source, Software, Yarrow> mem: <memory & I/O> npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <TOSHIB 750> on motherboard acpi0: [GIANT-LOCKED] ACPI-0438: *** Error: Looking up [\\_SB_.SBAT] in namespace, AE_NOT_FOUND SearchNode 0xc0d8a780 StartNode 0xc0d8a780 ReturnNode 0 ACPI-1303: *** Error: [NULL NAME], AE_NOT_FOUND acpi0: Power Button (fixed) atpic: Ignoring invalid level/low configuration for IRQ13 ACPI timer looks BAD min = 0, max = 4, width = 4 ACPI timer looks GOOD min = 0, max = 2, width = 2 ACPI timer looks GOOD min = 0, max = 2, width = 2 ACPI timer looks GOOD min = 0, max = 2, width = 2 ACPI timer looks GOOD min = 0, max = 2, width = 2 ACPI timer looks GOOD min = 0, max = 2, width = 2 ACPI timer looks GOOD min = 0, max = 2, width = 2 ACPI timer looks GOOD min = 0, max = 2, width = 2 ACPI timer looks GOOD min = 0, max = 2, width = 2 ACPI timer looks GOOD min = 0, max = 2, width = 2 Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x18a8-0x18ab on acpi0 mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) cpu0: <ACPI CPU> port 0x530-0x537 on acpi0 mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) acpi_tz0: <Thermal Zone> port 0x530-0x537 on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_acad0: <AC Adapter> on acpi0 acpi_cmbat0: <Control Method Battery> on acpi0 pci_open(1): mode 1 addr port (0x0cf8) is 0x8000a050 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=06011179) pcibios: BIOS version 2.10 Found $PIR table, 5 entries at 0xc00f8e80 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs embedded 0 17 A 0x01 3 4 5 6 7 9 10 11 12 14 15 embedded 0 19 A 0x01 3 4 5 6 7 9 10 11 12 14 15 embedded 0 19 B 0x01 3 4 5 6 7 9 10 11 12 14 15 slot 1 0 6 A 0x01 3 4 5 6 7 9 10 11 12 14 15 slot 1 0 6 B 0x01 3 4 5 6 7 9 10 11 12 14 15 slot 1 0 11 A 0x01 3 4 5 6 7 9 10 11 12 14 15 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 ACPI PCI link initial configuration: \\_SB_.PCI0.EIO_.LNKA irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.19.0 \\_SB_.PCI0.EIO_.LNKB irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.19.1 \\_SB_.PCI0.EIO_.LNKC irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.17.0 \\_SB_.PCI0.EIO_.LNKD irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.11.0 \\_SB_.PCI0.EIO_.LNKC irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.6.0 \\_SB_.PCI0.EIO_.LNKD irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.6.1 ACPI PCI link before setting link priority: \\_SB_.PCI0.EIO_.LNKA: interrupts: 3 4 5 6 7 9 10 11 12 14 15 penalty: 1060 1060 60 1060 1060 60 60 60 1060 10060 10060 references: 1 priority: 0 \\_SB_.PCI0.EIO_.LNKB: interrupts: 3 4 5 6 7 9 10 11 12 14 15 penalty: 1060 1060 60 1060 1060 60 60 60 1060 10060 10060 references: 1 priority: 0 \\_SB_.PCI0.EIO_.LNKC: interrupts: 3 4 5 6 7 9 10 11 12 14 15 penalty: 1060 1060 60 1060 1060 60 60 60 1060 10060 10060 references: 2 priority: 0 \\_SB_.PCI0.EIO_.LNKD: interrupts: 3 4 5 6 7 9 10 11 12 14 15 penalty: 1060 1060 60 1060 1060 60 60 60 1060 10060 10060 references: 2 priority: 0 ACPI PCI link before fixup for boot-disabled links: \\_SB_.PCI0.EIO_.LNKC: interrupts: 3 4 5 6 7 9 10 11 12 14 15 penalty: 1060 1060 60 1060 1060 60 60 60 1060 10060 10060 references: 2 priority: 4665 \\_SB_.PCI0.EIO_.LNKD: interrupts: 3 4 5 6 7 9 10 11 12 14 15 penalty: 1060 1060 60 1060 1060 60 60 60 1060 10060 10060 references: 2 priority: 4665 \\_SB_.PCI0.EIO_.LNKA: interrupts: 3 4 5 6 7 9 10 11 12 14 15 penalty: 1060 1060 60 1060 1060 60 60 60 1060 10060 10060 references: 1 priority: 2332 \\_SB_.PCI0.EIO_.LNKB: interrupts: 3 4 5 6 7 9 10 11 12 14 15 penalty: 1060 1060 60 1060 1060 60 60 60 1060 10060 10060 references: 1 priority: 2332 ACPI PCI link after fixup for boot-disabled links: ACPI PCI link arbitrated configuration: \\_SB_.PCI0.EIO_.LNKA irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.19.0 \\_SB_.PCI0.EIO_.LNKB irq 5: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.19.1 \\_SB_.PCI0.EIO_.LNKC irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.17.0 \\_SB_.PCI0.EIO_.LNKD irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.11.0 \\_SB_.PCI0.EIO_.LNKC irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.6.0 \\_SB_.PCI0.EIO_.LNKD irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.6.1 pci0: <ACPI PCI bus> on pcib0 pci0: physical bus=0 found-> vendor=0x1179, dev=0x0601, revid=0x2e bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0004, statreg=0xa280, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 3, range 32, base fd000000, size 24, enabled map[14]: type 1, range 32, base ffc00000, size 21, enabled map[18]: type 1, range 32, base ffb00000, size 20, enabled found-> vendor=0x10c8, dev=0x0004, revid=0x01 bus=0, slot=4, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x10 (4000 ns), maxlat=0xff (63750 ns) intpin=a, irq=255 map[10]: type 4, range 32, base 00000000, size 5, port disabled found-> vendor=0x1179, dev=0x0701, revid=0x22 bus=0, slot=17, func=0 class=07-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0400, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 map[10]: type 1, range 32, base 00000000, size 12, memory disabled found-> vendor=0x1179, dev=0x060f, revid=0x20 bus=0, slot=19, func=0 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0000, statreg=0x0480, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 map[10]: type 1, range 32, base 00000000, size 12, memory disabled found-> vendor=0x1179, dev=0x060f, revid=0x20 bus=0, slot=19, func=1 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0000, statreg=0x0480, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=255 pci0: <display, VGA> at device 4.0 (no driver attached) pci0: <simple comms> at device 17.0 (no driver attached) cbb0: <ToPIC97 PCI-CardBus Bridge> at device 19.0 on pci0 cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xf0000000 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 pcib0: matched entry for 0.19.INTA (src \\_SB_.PCI0.EIO_.LNKA) pcib0: slot 19 INTA is routed to irq 9 cbb0: [MPSAFE] cbb0: PCI Configuration space: 0x00: 0x060f1179 0x04800007 0x06070020 0x00820000 0x10: 0xf0000000 0x04800000 0x00141400 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffc 0x30: 0x00000000 0x0000fffc 0x00000000 0x04000109 0x40: 0x00011179 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x00000000 0x00000000 0x00000000 0x01000000 0x90: 0x00000000 0x00000000 0x00000000 0x00000000 0xa0: 0x860011f0 0x00000002 0x00000000 0x0000d100 0xb0: 0x3f3f3fc3 0x0a081020 0x00010100 0x000003f1 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000008 cbb1: <ToPIC97 PCI-CardBus Bridge> at device 19.1 on pci0 cbb1: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xf0001000 cardbus1: <CardBus bus> on cbb1 pccard1: <16-bit PCCard bus> on cbb1 pcib0: matched entry for 0.19.INTB (src \\_SB_.PCI0.EIO_.LNKB) pcib0: slot 19 INTB is routed to irq 5 cbb1: [MPSAFE] cbb1: PCI Configuration space: 0x00: 0x060f1179 0x04800007 0x06070020 0x00820000 0x10: 0xf0001000 0x04800000 0x00151500 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffc 0x30: 0x00000000 0x0000fffc 0x00000000 0x04000205 0x40: 0x00011179 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x00000000 0x00000000 0x00000000 0x01000000 0x90: 0x00000000 0x00000000 0x00000000 0x00000000 0xa0: 0x860021f0 0x00000002 0x00000000 0x0000d100 0xb0: 0x3f3f3fc3 0x0a081020 0x00010100 0x000003f1 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000008 isab0: <ACPI Generic ISA bridge> on acpi0 isa0: <ISA bus> on isab0 unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 atkbd0: [GIANT-LOCKED] psm0: unable to allocate IRQ atpic: No ELCR to configure IRQ12 as edge/high psmcpnp0 irq 12 on acpi0 psm0: current command byte:0047 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000000, packet size:3 psm0: syncmask:c0, syncbits:00 sio0: irq maps: 0x1 0x11 0x11 0x11 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A atpic: No ELCR to configure IRQ4 as edge/high unknown: not probed (disabled) ppc0: parallel port not found. unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) ppc0: parallel port not found. unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) atkbdc: atkbdc0 already exists; skipping it sio: sio0 already exists; skipping it sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0 ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0 ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0 ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0 ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0 ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0 ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata0 at port 0x3f6,0x1f0-0x1f7 irq 14 on isa0 ata0: [MPSAFE] ata1: reset tp1 mask=00 ostat0=ff ostat1=ff ata1 at port 0x376,0x170-0x177 irq 15 on isa0 ata1: [MPSAFE] bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0 fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) ppc0: parallel port not found. ppc0: <Parallel port> failed to probe at irq 7 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0x1 0x1 0x1 0x1 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. Timecounter "TSC" frequency 233288786 Hz quality 800 Timecounters tick every 10.000 msec Linux ELF exec handler installed lo0: bpf attached cpu0: set speed to 100.0% acpi_cpu: throttling enabled, 16 steps (100% to 6.2%), currently 100.0% acpi_acad0: acline initialization start acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times acpi_cmbat0: battery initialization start acpi_cmbat0: battery initialization done, tried 1 times ata0-master: pio=0x0c wdma=0x22 udma=0x44 cable=80pin ad0: <TOSHIBA MK2016GAP/U0.30 A> ATA-5 disk at ata0-master ad0: 19077MB (39070080 sectors), 38760 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, PIO4 GEOM: new disk ad0 [0] f:00 typ:6 s(CHS):0/1/1 e(CHS):259/254/63 s:63 l:4176837 [1] f:80 typ:165 s(CHS):260/0/1 e(CHS):1016/254/63 s:4176900 l:12161205 [2] f:00 typ:11 s(CHS):1017/0/1 e(CHS):1023/254/63 s:16338105 l:192780 [3] f:00 typ:165 s(CHS):1023/255/63 e(CHS):1023/254/63 s:16530885 l:22539195 GEOM: Configure ad0s1, start 32256 length 2138540544 end 2138572799 GEOM: Configure ad0s2, start 2138572800 length 6226536960 end 8365109759 GEOM: Configure ad0s3, start 8365109760 length 98703360 end 8463813119 GEOM: Configure ad0s4, start 8463813120 length 11540067840 end 20003880959 GEOM: Configure ad0s2a, start 0 length 100663296 end 100663295 GEOM: Configure ad0s2b, start 100663296 length 134217728 end 234881023 GEOM: Configure ad0s2c, start 0 length 6226536960 end 6226536959 GEOM: Configure ad0s2e, start 234881024 length 134217728 end 369098751 GEOM: Configure ad0s2f, start 369098752 length 5857438208 end 6226536959 GEOM: Configure ad0s4c, start 0 length 11540067840 end 11540067839 GEOM: Configure ad0s4e, start 0 length 11540067840 end 11540067839 Mounting root from ufs:/dev/ad0s2a WARNING: / was not properly dismounted start_init: trying /sbin/init Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2-CURRENT #20: Sat Feb 7 22:42:47 GMT 2004 root_at_grimreaper.grondar.org:/usr/src/sys/i386/compile/LIBRETTO Preloaded elf kernel "/boot/kernel.works/kernel" at 0xc07bf000. Preloaded elf module "/boot/kernel.works/linux.ko" at 0xc07bf29c. Preloaded elf module "/boot/kernel.works/sysvshm.ko" at 0xc07bf34c. Preloaded elf module "/boot/kernel.works/sysvsem.ko" at 0xc07bf400. Preloaded elf module "/boot/kernel.works/sysvmsg.ko" at 0xc07bf4b4. Preloaded elf module "/boot/kernel.works/if_dc.ko" at 0xc07bf568. Preloaded elf module "/boot/kernel.works/miibus.ko" at 0xc07bf618. Preloaded elf module "/boot/kernel.works/snd_mss.ko" at 0xc07bf6cc. Preloaded elf module "/boot/kernel.works/snd_pcm.ko" at 0xc07bf780. Preloaded elf module "/boot/kernel.works/random.ko" at 0xc07bf834. Preloaded elf module "/boot/kernel.works/nfsserver.ko" at 0xc07bf8e8. Preloaded elf module "/boot/kernel.works/nfsclient.ko" at 0xc07bf99c. Preloaded elf module "/boot/kernel.works/acpi.ko" at 0xc07bfa50. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Pentium/P55C (quarter-micron) (233.29-MHz 586-class CPU) Origin = "GenuineIntel" Id = 0x581 Stepping = 1 Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX> real memory = 67174400 (64 MB) avail memory = 60276736 (57 MB) Intel Pentium detected, installing workaround for F00F bug npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <TOSHIB 750> on motherboard ACPI-0438: *** Error: Looking up [\\_SB_.SBAT] in namespace, AE_NOT_FOUND SearchNode 0xc0d8ae20 StartNode 0xc0d8ae20 ReturnNode 0 ACPI-1287: *** Error: [NULL NAME], AE_NOT_FOUND acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x18a8-0x18ab on acpi0 acpi_cpu0: <CPU> port 0x530-0x537 on acpi0 acpi_tz0: <Thermal Zone> port 0x530-0x537 on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_acad0: <AC Adapter> on acpi0 acpi_cmbat0: <Control Method Battery> on acpi0 pcibios: BIOS version 2.10 Using $PIR table, 5 entries at 0xc00f8e80 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: <display, VGA> at device 4.0 (no driver attached) pci0: <simple comms> at device 17.0 (no driver attached) cbb0: <ToPIC97 PCI-CardBus Bridge> at device 19.0 on pci0 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 pcib0: slot 19 INTA is routed to irq 9 cbb0: [MPSAFE] cbb1: <ToPIC97 PCI-CardBus Bridge> at device 19.1 on pci0 cardbus1: <CardBus bus> on cbb1 pccard1: <16-bit PCCard bus> on cbb1 pcib0: slot 19 INTB is routed to irq 5 cbb1: [MPSAFE] isab0: <ACPI Generic ISA bridge> on acpi0 isa0: <ISA bus> on isab0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A ppc0: parallel port not found. ppc0: parallel port not found. pmtimer0 on isa0 orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0 sc0: <System console> on isa0 sc0: VGA <16 virtual consoles, flags=0x200> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ata0 at port 0x3f6,0x1f0-0x1f7 irq 14 on isa0 ata0: [MPSAFE] ata1 at port 0x376,0x170-0x177 irq 15 on isa0 ata1: [MPSAFE] ppc0: parallel port not found. sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled Timecounter "TSC" frequency 233288935 Hz quality 800 Timecounters tick every 10.000 msec acpi_cpu: throttling enabled, 16 steps (100% to 6.2%), currently 100.0% ad0: 19077MB <TOSHIBA MK2016GAP> [38760/16/63] at ata0-master PIO4 Mounting root from ufs:/dev/ad0s2a WARNING: / was not properly dismounted WARNING: /home was not properly dismounted WARNING: /usr was not properly dismounted WARNING: /var was not properly dismounted /var: superblock summary recomputed lock order reversal 1st 0xc0c40630 vm object (vm object) _at_ vm/swap_pager.c:1314 2nd 0xc0620b20 swap_pager swhash (swap_pager swhash) _at_ vm/swap_pager.c:1823 3rd 0xc0c40948 vm object (vm object) _at_ vm/uma_core.c:886 Stack backtrace: backtrace(0,1,c05f5ea8,c05f6f38,c05c85dc) at backtrace+0x12 witness_checkorder(c0c40948,9,c05b33c5,376) at witness_checkorder+0x593 _mtx_lock_flags(c0c40948,0,c05b33bc,376,c15ff714) at _mtx_lock_flags+0x67 obj_alloc(c15ff700,1000,c62f9a3b,101,c15ff714) at obj_alloc+0x31 slab_zalloc(c15ff700,1,c15ff700,c15ff714,1) at slab_zalloc+0x82 uma_zone_slab(c15ff700,1,c15ff714,0,c05b33bc,68f) at uma_zone_slab+0xb5 uma_zalloc_internal(c15ff700,0,1,c15ff714,0) at uma_zalloc_internal+0x28 uma_zalloc_arg(c15ff700,0,1) at uma_zalloc_arg+0x2f8 swp_pager_meta_build(c0c40630,1a,0,2,0) at swp_pager_meta_build+0x108 swap_pager_putpages(c0c40630,c62f9c00,1,0,c62f9b70) at swap_pager_putpages+0x2b4 default_pager_putpages(c0c40630,c62f9c00,1,0,c62f9b70) at default_pager_putpages+0x18 vm_pageout_flush(c62f9c00,1,0,0,c05a42ea) at vm_pageout_flush+0x11e vm_pageout_clean(c0d00928) at vm_pageout_clean+0x2a5 vm_pageout_scan(1) at vm_pageout_scan+0x537 vm_pageout(0,c62f9d48,0,c05515ac,0) at vm_pageout+0x2d2 fork_exit(c05515ac,0,c62f9d48) at fork_exit+0xa8 fork_trampoline() at fork_trampoline+0x8 --- trap 0x1, eip = 0, esp = 0xc62f9d7c, ebp = 0 --- pid 609 (stunnel), uid 0: exited on signal 10 (core dumped) dc0: <Xircom X3201 10/100BaseTX> port 0x1000-0x107f mem 0x88002000-0x880027ff,0x88002800-0x88002fff irq 9 at device 0.0 on cardbus0 dc0: Ethernet address: 00:10:a4:de:86:02 miibus0: <MII bus> on dc0 tdkphy0: <TDK 78Q2120 media interface> on miibus0 tdkphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, autoReceived on Sun Jul 04 2004 - 08:49:00 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:00 UTC