On Thu, 8 Jul 2004, Bjoern A. Zeeb wrote: > had a kernel yesterday with SCHED_4BSD where boot -h and serial > console worked fine. Then I had built a kernel (same sources with > SCHED_ULE and with updated sources somewhen this night). > > After console=comconsole pxeboot prints things on serial console - so > this works; but after boot (-h) nothing is printed with both ULE > kernels. > > checked sio0 and sio1 for output - just in case. also checked the screen > but neither with boot -h nor with boot anything appears there either. > > anyone any ideas ? ok I further tested things and cannot get serial console with either 4BSD or ULE with sources from around 20040707-2120 UTC so it's not a problem of the scheduler. I'd really like to know why the thing is rebooting somewhen later but it's some kind of problem w/o console. Could it be a problem with pxeboot ? (I also had tried older ones I had lying around but no change). I tested with and without the following in make.conf: BOOT_COMCONSOLE_PORT= 0x3F8 BOOT_COMCONSOLE_SPEED= 9600 here's what a show gives before booting: --- cut --- LINES=24 boot.netif.gateway=... boot.netif.hwaddr=... boot.netif.ip=... boot.netif.netmask=... boot.nfsroot.nfshandle=X0000000000000000000000000000000000000000000000000000000000000000X boot.nfsroot.path=/pxeroot boot.nfsroot.server=... boot_verbose=1 console=comconsole currdev=pxe0: interpret=OK kernelname=/boot/kernel/kernel loaddev=pxe0: module_path=/boot/kernel;/boot/modules vfs.root.mountfrom=ufs:/dev/md0c --- cut --- Anyone ? -- Bjoern A. Zeeb bzeeb at Zabbadoz dot NeTReceived on Thu Jul 08 2004 - 12:40:11 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:00 UTC