Hi, folks, My friend at Nankai University has a problem with Networking subsystem on FreeBSD/SPARC64. With a heavy FTP load, ipkterr raises rapidly. As I don't have sparc64 based hardware at hand, I send this mail on behalf of him with a hope that someone can give him some hints to figure out what is happening. Please fell free if I have missed some information and I will forward these to him. Hope we have provided useful information :-) fell free to ask us for more if necessary. Upgrading to -CURRENT does not solved the problem. After some experiences we believe that this is not due to a networking hardware/device error. Same hardware works well under other operating system. Here comes some detailed information: /root# uname -a FreeBSD Sun.teda.nankai.edu.cn 5.2.1-RELEASE-p9 FreeBSD 5.2.1-RELEASE-p9 #2: Fri Jul 9 16:14:19 CST 2004 root_at_Sun.teda.nankai.edu.cn:/usr/obj/usr/src/sys/GENERIC sparc64 /root# cat /var/run/dmesg.bootstray vector interrupt 2029 Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2.1-RELEASE-p8 #1: Wed Feb 25 13:20:54 CST 2004 root_at_Sun.teda.nankai.edu.cn:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xc0454000. Timecounter "tick" frequency 400000000 Hz quality 0 real memory = 536870912 (512 MB) avail memory = 509976576 (486 MB) cpu0: Sun Microsystems UltraSparc-II Processor (400.00 MHz CPU) nexus0: <OpenFirmware Nexus device> nexus0: <associations>, type (unknown) (no driver attached) pcib0: <U2P UPA-PCI bridge> on nexus0 pcib0: Psycho, impl 0, version 4, ign 0x7c0, bus B pcib0: [FAST] pcib0: [FAST] pcib0: [FAST] initialializing counter-timer Timecounter "counter-timer" frequency 1000000 Hz quality 0 DVMA map: 0xfc000000 to 0xffffffff pci0: <OFW PCI bus> on pcib0 ebus0: revision 0x01 ebus0: <PCI-EBus2 bridge> mem 0x71000000-0x717fffff,0x70000000-0x70ffffff at device 1.0 on pci0 ebus0: <auxio> addr 0x140072f000-0x140072f003,0x140072c000-0x140072c003,0x140072a000-0x140072a003,0x1400728000-0x1400728003,0x1400726000-0x1400726003 (no driver attached) ebus0: <power> addr 0x1400724000-0x1400724003 (no driver attached) ebus0: <SUNW,pll> addr 0x1400504000-0x1400504002 (no driver attached) ebus0: <sc> addr 0x1400500000-0x1400500007 (no driver attached) sab0: <SiemeNs SAB 82532 v3.2> addr 0x1400400000-0x140040007f irq 43 on ebus0 sab0: [FAST] sabtty0: <ttya> on sab0 sabtty1: <ttyb> on sab0 sab1: <Siemens SAB 82532 v3.2> addr 0x1400200000-0x140020007f irq 35 on ebus0 sab1: [FAST] sabtty2: <ttyc> on sab1 sabtty3: <ttyd> on sab1 ebus0: <su> addr 0x14003083f8-0x14003083ff irq 41 (no driver attached) ebus0: <su> addr 0x14003062f8-0x14003062ff irq 33 (no driver attached) ebus0: <ecpp> addr 0x1400700000-0x140070000f,0x1400300398-0x1400300399,0x14003043bc-0x14003043cb irq 33 (no driver attached) ebus0: <fdthree> addr 0x1400720000-0x1400720003,0x1400706000-0x140070600f,0x14003023f0-0x14003023f7 irq 39 (no driver attached) eeprom0: <EBus EEPROM/clock> addr 0x1400000000-0x1400001fff on ebus0 eeprom0: model mk48t59 eeprom0: hostid 80e68af0 ebus0: <flashprom> addr 0x1000000000-0x10000fffff,0x1000000000-0x10000fffff (no driver attached) ebus0: <SUNW,envctrltwo> addr 0x1400600000-0x1400600003 irq 37,40 (no driver attached) hme0: <Sun HME 10/100 Ethernet> mem 0x8000-0xffff at device 1.1 on pci0 hme0: Ethernet address: 08:00:20:e6:8a:f0 miibus0: <MII bus> on hme0 nsphy0: <DP83840 10/100 media interface> on miibus0 nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto sym0: <875> port 0x400-0x4ff mem 0x12000-0x12fff,0x10000-0x100ff at device 3.0 on pci0 sym0: No NVRAM, ID 7, Fast-20, SE, parity checking sym1: <875> port 0x800-0x8ff mem 0x16000-0x16fff,0x14000-0x140ff at device 3.1 on pci0 sym1: No NVRAM, ID 7, Fast-20, SE, parity checking pcib1: <U2P UPA-PCI bridge> on nexus0 pcib1: Psycho, impl 0, version 4, ign 0x7c0, bus A pci1: <OFW PCI bus> on pcib1 pci1: <display> at device 1.0 (no driver attached) nexus0: <rsc>, type system-service-processor (no driver attached) nexus0: <mc>, type memory-controller (no driver attached) Timecounters tick every 10.000 msec Waiting 15 seconds for SCSI devices to settle GEOM: create disk da0 dp=0xfffff80000940c68 GEOM: create disk da1 dp=0xfffff800007f4068 GEOM: create disk da2 dp=0xfffff800007f5068 GEOM: create disk da3 dp=0xfffff80000940868 GEOM: create disk da4 dp=0xfffff800007f2068 GEOM: create disk da5 dp=0xfffff800007abc68 GEOM: create disk cd0 dp=0xfffff80000864698 da0 at sym0 bus 0 target 0 lun 0 da0: <IBM DDYST1835SUN18G S94A> Fixed Direct Access SCSI-3 device da0: 40.000MB/s transfers (20.000MHz, offset 16, 16bit), Tagged Queueing Enabled da0: 17274MB (35378533 512 byte sectors: 255H 63S/T 2202C) da1 at sym0 bus 0 target 8 lun 0 da1: <SEAGATE ST336607LC 0007> Fixed Direct Access SCSI-3 device da1: 40.000MB/s transfers (20.000MHz, offset 16, 16bit), Tagged Queueing Enabled da1: 35003MB (71687372 512 byte sectors: 255H 63S/T 4462C) da2 at sym0 bus 0 target 9 lun 0 da2: <SEAGATE ST336607LC 0007> Fixed Direct Access SCSI-3 device da2: 40.000MB/s transfers (20.000MHz, offset 16, 16bit), Tagged Queueing Enabled da2: 35003MB (71687372 512 byte sectors: 255H 63S/T 4462C) da3 at sym0 bus 0 target 10 lun 0 da3: <SEAGATE ST336607LC 0007> Fixed Direct Access SCSI-3 device da3: 40.000MB/s transfers (20.000MHz, offset 16, 16bit), Tagged Queueing Enabled da3: 35003MB (71687372 512 byte sectors: 255H 63S/T 4462C) cd0 at sym0 bus 0 target 6 lun 0 cd0: <TOSHIBA XM6201TASUN32XCD 1103> Removable CD-ROM SCSI-2 device cd0: 10.000MB/s transfers (10.000MHz, offset 16) cd0: Attempt to query device size failed: NOT READY, Medium not present da4 at sym0 bus 0 target 11 lun 0 da4: <SEAGATE ST336607LC 0007> Fixed Direct Access SCSI-3 device da4: 40.000MB/s transfers (20.000MHz, offset 16, 16bit), Tagged Queueing Enabled da4: 35003MB (71687372 512 byte sectors: 255H 63S/T 4462C) da5 at sym0 bus 0 target 12 lun 0 da5: <SEAGATE ST336607LC 0007> Fixed Direct Access SCSI-3 device da5: 40.000MB/s transfers (20.000MHz, offset 16, 16bit), Tagged Queueing Enabled da5: 35003MB (71687372 512 byte sectors: 255H 63S/T 4462C) Mounting root from ufs:/dev/da0a WARNING: / was not properly dismounted WARNING: /tmp was not properly dismounted WARNING: /usr was not properly dismounted WARNING: /var was not properly dismounted /var: superblock summary recomputed hme0: invalid packet size 8422; dropping hme0: invalid packet size 7; dropping hme0: invalid packet size 7; dropping hme0: invalid packet size 7; dropping hme0: invalid packet size 7; dropping hme0: too may errors; not reporting any more Waiting (max 60 seconds) for system process `vnlru' to stop...stopped Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped Waiting (max 60 seconds) for system process `syncer' to stop...stopped syncing disks, buffers remaining... 1 1 done stray vector interrupt 2029 Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2.1-RELEASE-p9 #2: Fri Jul 9 16:14:19 CST 2004 root_at_Sun.teda.nankai.edu.cn:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xc0454000. Timecounter "tick" frequency 400000000 Hz quality 0 real memory = 536870912 (512 MB) avail memory = 509976576 (486 MB) cpu0: Sun Microsystems UltraSparc-II Processor (400.00 MHz CPU) nexus0: <OpenFirmware Nexus device> nexus0: <associations>, type (unknown) (no driver attached) pcib0: <U2P UPA-PCI bridge> on nexus0 pcib0: Psycho, impl 0, version 4, ign 0x7c0, bus B pcib0: [FAST] pcib0: [FAST] pcib0: [FAST] initialializing counter-timer Timecounter "counter-timer" frequency 1000000 Hz quality 0 DVMA map: 0xfc000000 to 0xffffffff pci0: <OFW PCI bus> on pcib0 ebus0: revision 0x01 ebus0: <PCI-EBus2 bridge> mem 0x71000000-0x717fffff,0x70000000-0x70ffffff at device 1.0 on pci0 ebus0: <auxio> addr 0x140072f000-0x140072f003,0x140072c000-0x140072c003,0x140072a000-0x140072a003,0x1400728000-0x1400728003,0x1400726000-0x1400726003 (no driver attached) ebus0: <power> addr 0x1400724000-0x1400724003 (no driver attached) ebus0: <SUNW,pll> addr 0x1400504000-0x1400504002 (no driver attached) ebus0: <sc> addr 0x1400500000-0x1400500007 (no driver attached) sab0: <Siemens SAB 82532 v3.2> addr 0x1400400000-0x140040007f irq 43 on ebus0 sab0: [FAST] sabtty0: <ttya> on sab0 sabtty1: <ttyb> on sab0 sab1: <Siemens SAB 82532 v3.2> addr 0x1400200000-0x140020007f irq 35 on ebus0 sab1: [FAST] sabtty2: <ttyc> on sab1 sabtty3: <ttyd> on sab1 ebus0: <su> addr 0x14003083f8-0x14003083ff irq 41 (no driver attached) ebus0: <su> addr 0x14003062f8-0x14003062ff irq 33 (no driver attached) ebus0: <ecpp> addr 0x1400700000-0x140070000f,0x1400300398-0x1400300399,0x14003043bc-0x14003043cb irq 33 (no driver attached) ebus0: <fdthree> addr 0x1400720000-0x1400720003,0x1400706000-0x140070600f,0x14003023f0-0x14003023f7 irq 39 (no driver attached) eeprom0: <EBus EEPROM/clock> addr 0x1400000000-0x1400001fff on ebus0 eeprom0: model mk48t59 eeprom0: hostid 80e68af0 ebus0: <flashprom> addr 0x1000000000-0x10000fffff,0x1000000000-0x10000fffff (no driver attached) ebus0: <SUNW,envctrltwo> addr 0x1400600000-0x1400600003 irq 37,40 (no driver attached) hme0: <Sun HME 10/100 Ethernet> mem 0x8000-0xffff at device 1.1 on pci0 hme0: Ethernet address: 08:00:20:e6:8a:f0 miibus0: <MII bus> on hme0 nsphy0: <DP83840 10/100 media interface> on miibus0 nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto sym0: <875> port 0x400-0x4ff mem 0x12000-0x12fff,0x10000-0x100ff at device 3.0 on pci0 sym0: No NVRAM, ID 7, Fast-20, SE, parity checking sym1: <875> port 0x800-0x8ff mem 0x16000-0x16fff,0x14000-0x140ff at device 3.1 on pci0 sym1: No NVRAM, ID 7, Fast-20, SE, parity checking pcib1: <U2P UPA-PCI bridge> on nexus0 pcib1: Psycho, impl 0, version 4, ign 0x7c0, bus A pci1: <OFW PCI bus> on pcib1 pci1: <display> at device 1.0 (no driver attached) nexus0: <rsc>, type system-service-processor (no driver attached) nexus0: <mc>, type memory-controller (no driver attached) Timecounters tick every 10.000 msec Waiting 15 seconds for SCSI devices to settle GEOM: create disk da0 dp=0xfffff800007f3868 GEOM: create disk da1 dp=0xfffff80000940868 GEOM: create disk da2 dp=0xfffff80000940c68 GEOM: create disk da3 dp=0xfffff800007ab068 GEOM: create disk da4 dp=0xfffff800007ab468 GEOM: create disk da5 dp=0xfffff800008fbc68 GEOM: create disk cd0 dp=0xfffff80000864698 da0 at sym0 bus 0 target 0 lun 0 da0: <IBM DDYST1835SUN18G S94A> Fixed Direct Access SCSI-3 device da0: 40.000MB/s transfers (20.000MHz, offset 16, 16bit), Tagged Queueing Enabled da0: 17274MB (35378533 512 byte sectors: 255H 63S/T 2202C) da1 at sym0 bus 0 target 8 lun 0 da1: <SEAGATE ST336607LC 0007> Fixed Direct Access SCSI-3 device da1: 40.000MB/s transfers (20.000MHz, offset 16, 16bit), Tagged Queueing Enabled da1: 35003MB (71687372 512 byte sectors: 255H 63S/T 4462C) da2 at sym0 bus 0 target 9 lun 0 da2: <SEAGATE ST336607LC 0007> Fixed Direct Access SCSI-3 device da2: 40.000MB/s transfers (20.000MHz, offset 16, 16bit), Tagged Queueing Enabled da2: 35003MB (71687372 512 byte sectors: 255H 63S/T 4462C) da3 at sym0 bus 0 target 10 lun 0 da3: <SEAGATE ST336607LC 0007> Fixed Direct Access SCSI-3 device da3: 40.000MB/s transfers (20.000MHz, offset 16, 16bit), Tagged Queueing Enabled da3: 35003MB (71687372 512 byte sectors: 255H 63S/T 4462C) da4 at sym0 bus 0 target 11 lun 0 da4: <SEAGATE ST336607LC 0007> Fixed Direct Access SCSI-3 device da4: 40.000MB/s transfers (20.000MHz, offset 16, 16bit), Tagged Queueing Enabled da4: 35003MB (71687372 512 byte sectors: 255H 63S/T 4462C) da5 at sym0 bus 0 target 12 lun 0 da5: <SEAGATE ST336607LC 0007> Fixed Direct Access SCSI-3 device da5: 40.000MB/s transfers (20.000MHz, offset 16, 16bit), Tagged Queueing Enabled da5: 35003MB (71687372 512 byte sectors: 255H 63S/T 4462C) cd0 at sym0 bus 0 target 6 lun 0 cd0: <TOSHIBA XM6201TASUN32XCD 1103> Removable CD-ROM SCSI-2 device cd0: 10.000MB/s transfers (10.000MHz, offset 16) cd0: Attempt to query device size failed: NOT READY, Medium not present Mounting root from ufs:/dev/da0a Waiting (max 60 seconds) for system process `vnlru' to stop...stopped Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped Waiting (max 60 seconds) for system process `syncer' to stop...stopped syncing disks, buffers remaining... 26 26 17 17 done Costray vector interrupt 2029 pyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2.1-RELEASE-p9 #2: Fri Jul 9 16:14:19 CST 2004 root_at_Sun.teda.nankai.edu.cn:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xc0454000. Timecounter "tick" frequency 400000000 Hz quality 0 real memory = 536870912 (512 MB) avail memory = 509976576 (486 MB) cpu0: Sun Microsystems UltraSparc-II Processor (400.00 MHz CPU) nexus0: <OpenFirmware Nexus device> nexus0: <associations>, type (unknown) (no driver attached) pcib0: <U2P UPA-PCI bridge> on nexus0 pcib0: Psycho, impl 0, version 4, ign 0x7c0, bus B pcib0: [FAST] pcib0: [FAST] pcib0: [FAST] initialializing counter-timer Timecounter "counter-timer" frequency 1000000 Hz quality 0 DVMA map: 0xfc000000 to 0xffffffff pci0: <OFW PCI bus> on pcib0 ebus0: revision 0x01 ebus0: <PCI-EBus2 bridge> mem 0x71000000-0x717fffff,0x70000000-0x70ffffff at device 1.0 on pci0 ebus0: <auxio> addr 0x140072f000-0x140072f003,0x140072c000-0x140072c003,0x140072a000-0x140072a003,0x1400728000-0x1400728003,0x1400726000-0x1400726003 (no driver attached) ebus0: <power> addr 0x1400724000-0x1400724003 (no driver attached) ebus0: <SUNW,pll> addr 0x1400504000-0x1400504002 (no driver attached) ebus0: <sc> addr 0x1400500000-0x1400500007 (no driver attached) sab0: <Siemens SAB 82532 v3.2> addr 0x1400400000-0x140040007f irq 43 on ebus0 sab0: [FAST] sabtty0: <ttya> on sab0 sabtty1: <ttyb> on sab0 sab1: <Siemens SAB 82532 v3.2> addr 0x1400200000-0x140020007f irq 35 on ebus0 sab1: [FAST] sabtty2: <ttyc> on sab1 sabtty3: <ttyd> on sab1 ebus0: <su> addr 0x14003083f8-0x14003083ff irq 41 (no driver attached) ebus0: <su> addr 0x14003062f8-0x14003062ff irq 33 (no driver attached) ebus0: <ecpp> addr 0x1400700000-0x140070000f,0x1400300398-0x1400300399,0x14003043bc-0x14003043cb irq 33 (no driver attached) ebus0: <fdthree> addr 0x1400720000-0x1400720003,0x1400706000-0x140070600f,0x14003023f0-0x14003023f7 irq 39 (no driver attached) eeprom0: <EBus EEPROM/clock> addr 0x1400000000-0x1400001fff on ebus0 eeprom0: model mk48t59 eeprom0: hostid 80e68af0 ebus0: <flashprom> addr 0x1000000000-0x10000fffff,0x1000000000-0x10000fffff (no driver attached) ebus0: <SUNW,envctrltwo> addr 0x1400600000-0x1400600003 irq 37,40 (no driver attached) hme0: <Sun HME 10/100 Ethernet> mem 0x8000-0xffff at device 1.1 on pci0 hme0: Ethernet address: 08:00:20:e6:8a:f0 miibus0: <MII bus> on hme0 nsphy0: <DP83840 10/100 media interface> on miibus0 nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto sym0: <875> port 0x400-0x4ff mem 0x12000-0x12fff,0x10000-0x100ff at device 3.0 on pci0 sym0: No NVRAM, ID 7, Fast-20, SE, parity checking sym1: <875> port 0x800-0x8ff mem 0x16000-0x16fff,0x14000-0x140ff at device 3.1 on pci0 sym1: No NVRAM, ID 7, Fast-20, SE, parity checking pcib1: <U2P UPA-PCI bridge> on nexus0 pcib1: Psycho, impl 0, version 4, ign 0x7c0, bus A pci1: <OFW PCI bus> on pcib1 pci1: <display> at device 1.0 (no driver attached) nexus0: <rsc>, type system-service-processor (no driver attached) nexus0: <mc>, type memory-controller (no driver attached) Timecounters tick every 10.000 msec Waiting 15 seconds for SCSI devices to settle GEOM: create disk da0 dp=0xfffff800007f3868 GEOM: create disk da1 dp=0xfffff80000940868 GEOM: create disk da2 dp=0xfffff80000940c68 GEOM: create disk da3 dp=0xfffff800007ab068 GEOM: create disk da4 dp=0xfffff800007ab468 GEOM: create disk da5 dp=0xfffff800008fbc68 gEOM: create disk cd0 dp=0xfffff80000864698 da0 at sym0 bus 0 target 0 lun 0 da0: <IBM DDYST1835SUN18G S94A> Fixed Direct Access SCSI-3 device da0: 40.000MB/s transfers (20.000MHz, offset 16, 16bit), Tagged Queueing Enabled da0: 17274MB (35378533 512 byte sectors: 255H 63S/T 2202C) da1 at sym0 bus 0 target 8 lun 0 da1: <SEAGATE ST336607LC 0007> Fixed Direct Access SCSI-3 device da1: 40.000MB/s transfers (20.000MHz, offset 16, 16bit), Tagged Queueing Enabled da1: 35003MB (71687372 512 byte sectors: 255H 63S/T 4462C) da2 at sym0 bus 0 target 9 lun 0 da2: <SEAGATE ST336607LC 0007> Fixed Direct Access SCSI-3 device da2: 40.000MB/s transfers (20.000MHz, offset 16, 16bit), Tagged Queueing Enabled da2: 35003MB (71687372 512 byte sectors: 255H 63S/T 4462C) da3 at sym0 bus 0 target 10 lun 0 da3: <SEAGATE ST336607LC 0007> Fixed Direct Access SCSI-3 device da3: 40.000MB/s transfers (20.000MHz, offset 16, 16bit), Tagged Queueing Enabled da3: 35003MB (71687372 512 byte sectors: 255H 63S/T 4462C) da4 at sym0 bus 0 target 11 lun 0 da4: <SEAGATE ST336607LC 0007> Fixed Direct Access SCSI-3 device da4: 40.000MB/s transfers (20.000MHz, offset 16, 16bit), Tagged Queueing Enabled da4: 35003MB (71687372 512 byte sectors: 255H 63S/T 4462C) da5 at sym0 bus 0 target 12 lun 0 da5: <SEAGATE ST336607LC 0007> Fixed Direct Access SCSI-3 device da5: 40.000MB/s transfers (20.000MHz, offset 16, 16bit), Tagged Queueing Enabled da5: 35003MB (71687372 512 byte sectors: 255H 63S/T 4462C) cd0 at sym0 bus 0 target 6 lun 0 cd0: <TOSHIBA XM6201TASUN32XCD 1103> Removable CD-ROM SCSI-2 device cd0: 10.000MB/s transfers (10.000MHz, offset 16) cd0: Attempt to query device size failed: NOT READY, Medium not present Mounting root from ufs:/dev/da0a /root# ifconfig hme0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 inet 10.10.99.135 netmask 0xffffff00 broadcast 10.10.99.255 inet6 fe80::a00:20ff:fee6:8af0%hme0 prefixlen 64 scopeid 0x1 ether 08:00:20:e6:8a:f0 media: Ethernet autoselect (100baseTX) status: active lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 inet 127.0.0.1 netmask 0xff000000 inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2 /root# pkg_info autoconf-2.53_1 Automatically configure source code on many Un*x platforms automake-1.5,1 GNU Standards-compliant Makefile generator cvsup-without-gui-16.1h General network file distribution system optimized for CVS expat-1.95.7 XML 1.0 parser written in C ezm3-1.1_2 Easier, more portable Modula-3 distribution for building CV gettext-0.13.1_1 GNU gettext package gmake-3.80_2 GNU version of 'make' utility help2man-1.33.1 Automatically generating simple manual pages from program o libiconv-1.9.2 A character set conversion library libtool-1.3.5_2 Generic shared library support script (version 1.3) libtool-1.5.6_1 Generic shared library support script (version 1.5) m4-1.4_1 GNU m4 p5-gettext-1.01_4 Message handling functions perl-5.6.1_15 Practical Extraction and Report Language portupgrade-20040701_2 FreeBSD ports/packages administration and management tool s ruby-1.8.1.2004.05.02 An object-oriented interpreted scripting language ruby18-bdb1-0.2.2 Ruby interface to Berkeley DB revision 1.8x with full featu /usr/local/etc/rc.d# more pure-ftpd.sh #!/bin/sh case "$1" in start) /usr/local/sbin/pure-ftpd -0 -1 -4 -A -B -C 3 -E -f ftp -H -i -k 90 -l puredb:/etc/pureftpd.pdb -r -R -S ,21 -U 022:022 -X -Z ;; stop) [ -r /etc/pure-ftpd.pid ] && \ kill `cat /etc/pure-ftpd.pid` > /dev/null && \ echo -n ' pure-ftp' ;; *) echo "Usage: `basename $0` {start|stop}" >&2 ;; esac exit 0 Cheers, -- Xin LI <delphij frontfree net> http://www.delphij.net/ See complete headers for GPG key and other information.
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:01 UTC