Hi. When conducting the conversion on my opteron box, it failed with the following: ===> xorg-6.7.0_1 depends on file: /usr/X11R6/lib/modules/dri/r200_dri.so - not found ===> Verifying install for /usr/X11R6/lib/modules/dri/r200_dri.so in /usr/ports/graphics/dri ===> dri-5.0.2,1 is only for i386 alpha, and you are running amd64. *** Error code 1 Stop in /usr/ports/graphics/dri. *** Error code 1 Stop in /usr/ports/x11/xorg. Thanks in advance... I attach some system info. uname -a FreeBSD jracine.maxwell.syr.edu 5.2-CURRENT FreeBSD 5.2-CURRENT #2: Thu Jul 22 15:56:41 EDT 2004 dmesg Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2-CURRENT #2: Thu Jul 22 15:56:41 EDT 2004 root_at_jracine.maxwell.syr.edu:/usr/obj/usr/src/sys/OPTERON Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Opteron(tm) Processor 248 (2205.02-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0xf58 Stepping = 8 Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2> AMD Features=0xe0500800<SYSCALL,NX,MMX+,LM,3DNow+,3DNow> real memory = 3674144768 (3503 MB) avail memory = 3543965696 (3379 MB) pcib0: <Host to PCI bridge> at pcibus 0 on motherboard pci0: <PCI bus> on pcib0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) pcib2: <PCI-PCI bridge> at device 6.0 on pci0 pci2: <PCI bus> on pcib2 ohci0: <OHCI (generic) USB controller> mem 0xfd7fe000-0xfd7fefff irq 9 at device 0.0 on pci2 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 3 ports with 3 removable, self powered ohci1: <OHCI (generic) USB controller> mem 0xfd7ff000-0xfd7fffff irq 9 at device 0.1 on pci2 ohci1: [GIANT-LOCKED] usb1: OHCI version 1.0, legacy support usb1: SMM does not respond, resetting usb1: <OHCI (generic) USB controller> on ohci1 usb1: USB revision 1.0 uhub1: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 3 ports with 3 removable, self powered fwohci0: <Texas Instruments TSB43AB22/A> mem 0xfd7f8000-0xfd7fbfff,0xfd7fd800-0xfd7fdfff irq 5 at device 6.0 on pci2 fwohci0: [GIANT-LOCKED] fwohci0: OHCI version 1.10 (ROM=1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:00:00:00:00:01:0e:f8 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:00:00:01:0e:f8 fwe0: Ethernet address: 02:00:00:01:0e:f8 sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) ohci2: <NEC uPD 9210 USB controller> mem 0xfd7f7000-0xfd7f7fff irq 9 at device 7.0 on pci2 ohci2: [GIANT-LOCKED] usb2: OHCI version 1.0 usb2: <NEC uPD 9210 USB controller> on ohci2 usb2: USB revision 1.0 uhub2: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 3 ports with 3 removable, self powered ohci3: <NEC uPD 9210 USB controller> mem 0xfd7fc000-0xfd7fcfff irq 11 at device 7.1 on pci2 ohci3: [GIANT-LOCKED] usb3: OHCI version 1.0 usb3: <NEC uPD 9210 USB controller> on ohci3 usb3: USB revision 1.0 uhub3: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered pci2: <serial bus, USB> at device 7.2 (no driver attached) isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <AMD 8111 UDMA133 controller> port 0xffa0-0xffaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached) pcm0: <AMD-8111> port 0xcc00-0xcc3f,0xc800-0xc8ff irq 10 at device 7.5 on pci0 pcm0: [GIANT-LOCKED] pcm0: <Avance Logic ALC655 AC97 Codec> pcib3: <PCI-PCI bridge> at device 10.0 on pci0 pci3: <PCI bus> on pcib3 em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.25> port 0xac00-0xac1f mem 0xfd9c0000-0xfd9dffff,0xfd9e0000-0xfd9fffff irq 10 at device 1.0 on pci3 em0: [GIANT-LOCKED] em0: Ethernet address: 00:02:b3:ed:0b:12 em0: Speed:N/A Duplex:N/A skc0: <Marvell Gigabit Ethernet> port 0xa800-0xa8ff mem 0xfd99c000-0xfd99ffff irq 9 at device 3.0 on pci3 skc0: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter sk0: <Marvell Semiconductor, Inc. Yukon> on skc0 sk0: Ethernet address: 00:d0:68:03:d4:99 miibus0: <MII bus> on sk0 e1000phy0: <Marvell 88E1000 Gigabit PHY> on miibus0 e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, autoskc0: [GIANT-LOCKED] pci0: <base peripheral, interrupt controller> at device 10.1 (no driver attached) pcib4: <PCI-PCI bridge> at device 11.0 on pci0 pci4: <PCI bus> on pcib4 twe0: <3ware Storage Controller. Driver version 1.50.01.002> port 0xbc00-0xbc0f mem 0xfe000000-0xfe7fffff irq 10 at device 1.0 on pci4 twe0: [GIANT-LOCKED] twe0: 4 ports, Firmware FE7S 1.05.00.065, BIOS BE7X 1.08.00.048 pci0: <base peripheral, interrupt controller> at device 11.1 (no driver attached) cpu0 on motherboard orm0: <ISA Option ROMs> at iomem 0xcf800-0xd07ff,0xc0000-0xcf7ff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model IntelliMouse, device ID 3 fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0: cannot reserve I/O port range sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 2205016768 Hz quality 800 Timecounters tick every 0.976 msec ata1-master: FAILURE - ATAPI_RESET no interrupt acd0: CDRW <SAMSUNG CDRW/DVD SM-352B> at ata1-master PIO4 twed0: <Unit 0, TwinStor, Normal> on twe0 twed0: 70910MB (145224064 sectors) em0: Link is up 100 Mbps Full Duplex -- Professor J. S. Racine Phone: (315) 443-1630 Department of Economics FAX: (315) 443-1081 Syracuse University e-mail: jracine_at_maxwell.syr.edu Syracuse, NY, USA 13244-1020 http://www.maxwell.syr.edu/econ/faculty/jeffrey_racine.htm `The generation of random numbers is too important to be left to chance.'Received on Sun Jul 25 2004 - 16:15:57 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:03 UTC