I just got this after a reboot: boot() called on cpu#0 Waiting (max 60 seconds) for system process `vnlru' to stop... Process 'vnlru' stopped. Waiting (max 60 seconds) for system process `bufdaemon' to stop... Process 'bufdaemon' stopped. Waiting (max 60 seconds) for system process `syncer' to stop... Syncer syncing, vnodes remaining... 8 1 2 0 done. Process 'syncer' stopped. done Uptime: 20h55m21s Rebooting... cpu_reset called on cpu#0 cpu_reset: Stopping other CPUs Console: serial port BIOS drive A: is disk0 BIOS drive C: is disk1 BIOS 640kB/2096128kB available memory FreeBSD/i386 bootstrap loader, Revision 1.1 (root_at_athlon1.bsdnut.org, Sat Jul 10 22:18:32 CDT 2004) Loading /boot/defaults/loader.conf /boot/kernel/kernel text=0x432bec data=0x77524+0x45258 syms=[0x4+0x52290+0x4+0x64e85] | ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ ³ ³ ³ , , ³ ³ /( )` ³ Welcome to FreeBSD! ³ \ \___ / | ³ ³ /- _ `-/ ' ³ ³ (/\/ \ \ /\ ³ 1. Boot FreeBSD [default] ³ / / | ` \ ³ 2. Boot FreeBSD with ACPI enabled ³ O O ) / | ³ 3. Boot FreeBSD in Safe Mode ³ `-^--'`< ' ³ 4. Boot FreeBSD in single user mode ³ (_.) _ ) / ³ 5. Boot FreeBSD with verbose logging ³ `.___/` / ³ 6. Escape to loader prompt ³ `-----' / ³ 7. Reboot ³ <----. __ / __ \ ³ ³ <----|====O)))==) \) /==== ³ ³ <----' `--' `.__,' \ ³ ³ | | ³ ³ \ / /\ ³ Select option, [Enter] for default ³ ______( (_ / \______/ ³ or [Space] to pause timer 9 ³ ,' ,-----' | ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ `--{__________) Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2-CURRENT #0: Fri Jul 16 16:09:31 CDT 2004 root_at_athlon1.bsdnut.org:/usr/obj/usr/src/sys/ATHLON Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Athlon(tm) MP 1900+ (1600.06-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x662 Stepping = 2 Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> AMD Features=0xc0480000<MP,AMIE,DSP,3DNow!> real memory = 2147483648 (2048 MB) avail memory = 2096091136 (1998 MB) MPTable: <OEM00000 PROD00000000> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0: Assuming intbase of 0 ioapic0 <Version 1.1> irqs 0-23 on motherboard npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <MPTable Host-PCI bridge> at pcibus 0 on motherboard pci0: <PCI bus> on pcib0 agp0: <AMD 762 host to AGP bridge> port 0xe000-0xe003 mem 0xfd060000-0xfd060fff,0xe8000000-0xefffffff at device 0.0 on pci0 pcib1: <MPTable PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <display, VGA> at device 5.0 (no driver attached) isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <AMD 768 UDMA100 controller> port 0xd000-0xd00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached) pci0: <multimedia, audio> at device 7.5 (no driver attached) em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.25> port 0xdc00-0xdc3f mem 0xfd000000-0xfd03ffff,0xfd040000-0xfd05ffff irq 17 at device 9.0 on pci0 em0: [GIANT-LOCKED] em0: Ethernet address: 00:04:23:a7:c3:90 em0: Speed:N/A Duplex:N/A pcib2: <MPTable PCI-PCI bridge> at device 16.0 on pci0 pci2: <PCI bus> on pcib2 ohci0: <OHCI (generic) USB controller> mem 0xfc001000-0xfc001fff irq 19 at device 0.0 on pci2 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 4 ports with 4 removable, self powered ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0xc000-0xc0ff mem 0xfc000000-0xfc000fff irq 17 at device 5.0 on pci2 ahc0: [GIANT-LOCKED] aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs cpu0 on motherboard cpu1 on motherboard orm0: <ISA Option ROMs> at iomem 0xcc000-0xcc7ff,0xc0000-0xc8fff on isa0 pmtimer0 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0 ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x100> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A, console sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 unknown: <PNP0303> can't assign resources (port) unknown: <PNP0501> can't assign resources (port) unknown: <PNP0700> can't assign resources (port) unknown: <PNP0400> can't assign resources (port) unknown: <PNP0501> can't assign resources (port) Timecounters tick every 1.000 msec ad0: 117800MB <IC35L120AVVA07-0> [239340/16/63] at ata0-master UDMA100 ata1-slave: FAILURE - ATAPI_RESET no interrupt acd0: CDROM <CDU5211> at ata1-slave PIO4 em0: Link is up 100 Mbps Half Duplex sa0 at ahc0 bus 0 target 0 lun 0 sa0: <EXABYTE EXB-89008E030203 V39e> Removable Sequential Access SCSI-2 device sa0: 20.000MB/s transfers (10.000MHz, offset 8, 16bit) SMP: AP CPU #1 Launched! Mounting root from ufs:/dev/ad0s1a Pre-seeding PRNG: kickstart. Loading configuration files. Entropy harvesting: interrupts ethernet point_to_point kickstart. Starting file system checks: /dev/ad0s1a: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/ad0s1a: clean, 50230696 free (155008 frags, 6259461 blocks, 0.3% fragmentation) /dev/ad0s1b: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/ad0s1b: clean, 393100 free (28 frags, 49134 blocks, 0.0% fragmentation) Adding /usr/swap0 as additional swap Fatal trap 12: page fault while in kernel mode cpuid = 1; apic id = 01 fault virtual address = 0x8 fault code = supervisor read, page not present instruction pointer = 0x8:0xc06070dc stack pointer = 0x10:0xdd431c8c frame pointer = 0x10:0xdd431c98 code segment = base 0x0, limit 0xfffff, type 0x1b = DPL 0, pres 1, def32 1, gran 1 processor eflags = interrupt enabled, resume, IOPL = 0 current process = 2 (g_event) trap number = 12 panic: page fault cpuid = 1; boot() called on cpu#1 Syncer sy Fatal double fault: eip = 0xc07be090 esp = 0xdd415000 ebp = 0xdd41501c cpuid = 1; apic id = 01 panic: double fault cpuid = 1; boot() called on cpu#1 spin lock sched lock held by 0xc3463580 for > 5 seconds __________________________________ Do you Yahoo!? Yahoo! Mail is new and improved - Check it out! http://promotions.yahoo.com/new_mailReceived on Wed Jul 28 2004 - 20:54:01 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:03 UTC