Vadim Rozhik wrote: > On Thursday 03 June 2004 19:46, Kevin Oberman wrote: ... >> I also have a T30 and have no issues at all with the DVD/CDRW. I do >> know that I had to update the firmware for the drive (Toshiba) a >> while back to make it work orrectly with FreeBSD drivers. > > I have T30 model 2366-91G with 256 RAM, running today's GENERIC kernel, and > have the same trouble with DVD-ROM: > ... > ad0: 35087MB <HTS548040M9AT00> [71288/16/63] at ata0-master UDMA100 > ata1-slave: FAILURE - ATAPI_IDENTIFY no interrupt > ata1-slave: FAILURE - ATAPI_IDENTIFY no interrupt > acd0: DVDROM <HL-DT-STDVD-ROM GDR8081N> at ata1-master UDMA33 > Memory modified after free 0xc170ac00(508) val=ff70ff70 _at_ 0xc170ac00 > ... > Stopped at mtrash_ctor+0x4d: movl 0x20(%eax), %eax ... It starts similar here: (T30, model 2366 with (maybe, kinda unreadable -N6G) ata1-slave: FAILURE - ATAPI_IDENTIFY no interrupt ata1-slave: FAILURE - ATAPI_IDENTIFY no interrupt acd0: CDRW <UJDA730 DVD/CDRW> at ata1-master UDMA33 cd0 at ata1 bus 0 target 0 lun 0 cd0: <MATSHITA UJDA730 DVD/CDRW 1.04> Removable CD-ROM SCSI-0 device cd0: 33.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed Mounting root from ufs:/dev/ad0s2a but I have no 'Memory modified' problems. I use ACPI, and hw.ata.atapi_dma="1" in /boot/loader.conf on a custom 5.2-CURRENT kernel as of Sun May 30. Suspend/resume works (except backlight) but (re)starting X locks up the system. I hope it helps someone. -- HansReceived on Thu Jun 03 2004 - 11:41:56 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:55 UTC