Re: fxp(4) device timeouts ACPI related?

>>The ACPI updates predating last weekend seem to have broken my fxp(4)
>>card (Intel PRO/100 S, Intel 82550 chip). Without disabling ACPI at the
>>loader prompt (set hint.acpi.0.disabled=1) I get the consecutive message
>>of the device timing out and network is unusable.
>>
>>Perhaps this is useful information for everybody desiring to workaround
>>the problem or even some developer to have a closer look at it. If a
>>more detailed description of my setup is needed, just let me know.
> 
> 
> Can you get before and after dmesg's and post a diff?

Of course. diff is attached, the kernel is an unmodified GENERIC.


Regards,

-Andreas

--- dmesg.acpi	Fri Jun  4 19:20:30 2004
+++ dmesg.noacpi	Fri Jun  4 19:13:15 2004
_at__at_ -20,26 +20,19 _at__at_
 npx0: [FAST]
 npx0: <math processor> on motherboard
 npx0: INT 16 interface
-acpi0: <VIA694 MSI ACPI> on motherboard
-acpi0: [GIANT-LOCKED]
 pcibios: BIOS version 2.10
-acpi0: Power Button (fixed)
-Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
-acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
-cpu0: <ACPI CPU (3 Cx states)> on acpi0
-acpi_button0: <Power Button> on acpi0
-acpi_button1: <Sleep Button> on acpi0
-pcib0: <ACPI Host-PCI bridge> port 0x6000-0x607f,0x5000-0x500f,0x4080-0x40ff,0x4000-0x407f,0xcf8-0xcff on acpi0
-pci0: <ACPI PCI bus> on pcib0
-pcib0: slot 7 INTD is routed to irq 11
-pcib0: slot 7 INTD is routed to irq 11
-pcib0: slot 10 INTA is routed to irq 5
-pcib0: slot 14 INTA is routed to irq 5
+pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
+pir0: <PCI Interrupt Routing Table: 9 Entries> on motherboard
+$PIR: BIOS IRQ 10 for 0.7.INTD does not match link 0x5 irq 11
+pci0: <PCI bus> on pcib0
+$PIR: 0:7 INTD routed to irq 11
+$PIR: 0:7 INTD routed to irq 11
+$PIR: 0:10 INTA routed to irq 11
+$PIR: 0:14 INTA routed to irq 11
 agp0: <VIA 82C8363 (Apollo KT133A) host to PCI bridge> mem 0xd0000000-0xd7ffffff at device 0.0 on pci0
 pcib1: <PCI-PCI bridge> at device 1.0 on pci0
 pci1: <PCI bus> on pcib1
-pcib0: slot 1 INTA is routed to irq 11
-pcib1: slot 0 INTA is routed to irq 11
+$PIR: ROUTE_INTERRUPT failed.
 pci1: <display, VGA> at device 0.0 (no driver attached)
 isab0: <PCI-ISA bridge> at device 7.0 on pci0
 isa0: <ISA bus> on isab0
_at__at_ -66,45 +59,52 _at__at_
 uhub1: port error, giving up port 1
 uhub1: port error, restarting port 2
 uhub1: port error, giving up port 2
-fxp0: <Intel 82550 Pro/100 Ethernet> port 0xdc00-0xdc3f mem 0xe3000000-0xe301ffff,0xe3020000-0xe3020fff irq 5 at device 10.0 on pci0
+fxp0: <Intel 82550 Pro/100 Ethernet> port 0xdc00-0xdc3f mem 0xe3000000-0xe301ffff,0xe3020000-0xe3020fff irq 11 at device 10.0 on pci0
 miibus0: <MII bus> on fxp0
 inphy0: <i82555 10/100 media interface> on miibus0
 inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
 fxp0: Ethernet address: 00:02:b3:4c:9c:32
 fxp0: [GIANT-LOCKED]
-pcm0: <Creative EMU10K1> port 0xe000-0xe01f irq 5 at device 14.0 on pci0
+pcm0: <Creative EMU10K1> port 0xe000-0xe01f irq 11 at device 14.0 on pci0
 pcm0: <TriTech TR28023 AC97 Codec>
 pcm0: [GIANT-LOCKED]
-fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
+cpu0 on motherboard
+orm0: <Option ROMs> at iomem 0xcc000-0xcd7ff,0xc0000-0xcb7ff on isa0
+pmtimer0 on isa0
+atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
+atkbd0: <AT Keyboard> irq 1 on atkbdc0
+kbd0 at atkbd0
+atkbd0: [GIANT-LOCKED]
+psm0: <PS/2 Mouse> irq 12 on atkbdc0
+psm0: [GIANT-LOCKED]
+psm0: model IntelliMouse Explorer, device ID 4
+fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
 fdc0: FIFO enabled, 8 bytes threshold
 fd0: <1440-KB 3.5" drive> on fdc0 drive 0
-sio0 port 0x3f8-0x3ff irq 4 on acpi0
-sio0: type 16550A
-sio1 port 0x2f8-0x2ff irq 3 on acpi0
-sio1: type 16550A
-ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
-ppc0: SMC-like chipset (NIBBLE-only) in NIBBLE mode
+ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
+ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
+ppc0: FIFO with 16/16/8 bytes threshold
 ppbus0: <Parallel port bus> on ppc0
 plip0: <PLIP network interface> on ppbus0
 lpt0: <Printer> on ppbus0
 lpt0: Interrupt-driven port
 ppi0: <Parallel I/O> on ppbus0
-atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
-atkbd0: <AT Keyboard> irq 1 on atkbdc0
-kbd0 at atkbd0
-atkbd0: [GIANT-LOCKED]
-psm0: <PS/2 Mouse> irq 12 on atkbdc0
-psm0: [GIANT-LOCKED]
-psm0: model IntelliMouse Explorer, device ID 4
-orm0: <Option ROMs> at iomem 0xcc000-0xcd7ff,0xc0000-0xcb7ff on isa0
-pmtimer0 on isa0
 sc0: <System console> at flags 0x100 on isa0
 sc0: VGA <16 virtual consoles, flags=0x300>
+sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
+sio0: type 16550A
+sio1 at port 0x2f8-0x2ff irq 3 on isa0
+sio1: type 16550A
 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
-Timecounter "TSC" frequency 1195217519 Hz quality 800
+unknown: <PNP0303> can't assign resources (port)
+unknown: <PNP0f13> can't assign resources (irq)
+unknown: <PNP0700> can't assign resources (port)
+unknown: <PNP0501> can't assign resources (port)
+unknown: <PNP0501> can't assign resources (port)
+unknown: <PNP0401> can't assign resources (port)
+Timecounter "TSC" frequency 1195216772 Hz quality 800
 Timecounters tick every 10.000 msec
 ad0: 58644MB <IC35L060AVV207-0> [119150/16/63] at ata0-master UDMA100
 acd0: DVDROM <TOSHIBA DVD-ROM SD-M1612> at ata1-master PIO4
 acd1: CDRW <CR-48XATE> at ata1-slave PIO4
 Mounting root from ufs:/dev/ad0s1a
-fxp0: device timeout