ad4: FAILURE - already active DMA on this device

From: dikshie <dikshie_at_ppk.itb.ac.id>
Date: Wed, 9 Jun 2004 22:17:27 +0700
Dear All.
I upgraded my freebsd-5.2.1-release to -CURRENT on 10 June 2004.
after sucessfull make installworld and mergemaster, I rebooted and then
the machine give messages:
----------------------------------------------------------------
ad4: FAILURE - already active DMA on this device
ad4: setting up DMA failed
ad4: TIMEOUT - WRITE_DMA retrying (2 retries left) LBA=14610207
ad4: FAILURE - already active DMA on this device
ad4: setting up DMA failed
ad4: FAILURE - already active DMA on this device
ad4: setting up DMA failed
ad4: TIMEOUT - WRITE_DMA retrying (2 retries left) LBA=23001355
ad4: FAILURE - already active DMA on this device
ad4: setting up DMA failed
ad4: TIMEOUT - WRITE_DMA retrying (2 retries left) LBA=23001355
ad4: FAILURE - already active DMA on this device
ad4: setting up DMA failed
ad4: TIMEOUT - WRITE_DMA retrying (2 retries left) LBA=23001355
-----------------------------------------------------------------


complete dmesg:
-----------------------------------------------------------------
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.2-CURRENT #1: Tue Jun  8 19:48:49 WIT 2004
    root_at_new.ppk.itb.ac.id:/usr/obj/usr/src/sys/PPK
Preloaded elf kernel "/boot/kernel/kernel" at 0xc07de000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc07de294.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 2.26GHz (2261.01-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf29  Stepping = 9
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,C
MOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
real memory  = 536018944 (511 MB)
avail memory = 518533120 (494 MB)
random: <entropy source, Software, Yarrow>
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <INTEL S875PWP3> on motherboard
acpi0: [GIANT-LOCKED]
pcibios: BIOS version 2.10
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
cpu0: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 29 INTA is routed to irq 11
pcib0: slot 29 INTB is routed to irq 5
pcib0: slot 29 INTC is routed to irq 10
pcib0: slot 29 INTA is routed to irq 11
pcib0: slot 29 INTD is routed to irq 9
pcib0: slot 31 INTA is routed to irq 10
pcib0: slot 31 INTB is routed to irq 9
agp0: <Intel 82875P host to AGP bridge> mem 0xfc000000-0xfc7fffff at device 0.0
on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib2: slot 1 INTA is routed to irq 10
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.25> port 0xac00-0xac1f
 mem 0xfc9e0000-0xfc9fffff irq 10 at device 1.0 on pci2
em0: [GIANT-LOCKED]
em0: Ethernet address: 00:0c:f1:98:41:ac
em0:  Speed:N/A  Duplex:N/A
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xcc00-0xcc1f irq 11 at
device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xd000-0xd01f irq 5 at d
evice 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xd400-0xd41f irq 10 at
device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xd800-0xd81f irq 11 at
device 29.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib3: slot 6 INTA is routed to irq 5
pcib3: slot 8 INTA is routed to irq 5
pci3: <display, VGA> at device 6.0 (no driver attached)
fxp0: <Intel 82801BA (D865) Pro/100 VE Ethernet> port 0xbc00-0xbc3f mem 0xfeafe0
00-0xfeafefff irq 5 at device 8.0 on pci3
miibus0: <MII bus> on fxp0
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:0c:f1:e4:4e:67
fxp0: [GIANT-LOCKED]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 UDMA100 controller> port 0xffa0-0xffaf,0x376,0x170-0x177,0x
3f6,0x1f0-0x1f7 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
atapci1: <Intel ICH5 SATA150 controller> port 0xdc00-0xdc0f,0xe000-0xe003,0xe400
-0xe407,0xe800-0xe803,0xec00-0xec07 irq 10 at device 31.2 on pci0
ata2: at 0xec00 on atapci1
ata3: at 0xe400 on atapci1
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Sleep Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f4-0
x3f5,0x3f2-0x3f3,0x3f0-0x3f1 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0 port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
pmtimer0 on isa0
orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 2261009288 Hz quality 800
Timecounters tick every 1.000 msec
WARNING: apm_saver module requires apm enabled
ipfw2 initialized, divert disabled, rule-based forwarding enabled, default to ac
cept, logging limited to 100 packets/entry by default
IPv6 packet filtering initialized, default to accept, logging limited to 100 pac
kets/entry
IPsec: Initialized Security Association Processing.
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
acd0: CDROM <ASUS CD-S520/A4> at ata1-slave PIO4
em0: Link is up 10 Mbps Half Duplex
Interrupt storm detected on "irq10: em0 uhci2+"; throttling interrupt source
ad4: 76319MB <ST380013AS> [155061/16/63] at ata2-master SATA150
pass0 at ata1 bus 0 target 1 lun 0
pass0: <ASUS CD-S520/A4 1.3> Removable CD-ROM SCSI-0 device
pass0: 16.000MB/s transfers
Mounting root from ufs:/dev/ad4s1a
em0: Link is up 10 Mbps Half Duplex
ad4: FAILURE - already active DMA on this device
ad4: setting up DMA failed
ad4: TIMEOUT - WRITE_DMA retrying (2 retries left) LBA=14610207
ad4: FAILURE - already active DMA on this device
ad4: setting up DMA failed
ad4: FAILURE - already active DMA on this device
ad4: setting up DMA failed
ad4: TIMEOUT - WRITE_DMA retrying (2 retries left) LBA=23001355
ad4: FAILURE - already active DMA on this device
ad4: setting up DMA failed
ad4: TIMEOUT - WRITE_DMA retrying (2 retries left) LBA=23001355
ad4: FAILURE - already active DMA on this device
ad4: setting up DMA failed
ad4: TIMEOUT - WRITE_DMA retrying (2 retries left) LBA=23001355
--------------------------------------------------------------------------






with best regards,



-dikshie-
Received on Wed Jun 09 2004 - 13:17:47 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:56 UTC