On Jun 10, 2004, at 12:51 PM, Chad Leigh -- Shire.Net LLC wrote: > > On Jun 10, 2004, at 12:48 PM, Chad Leigh -- Shire.Net LLC wrote: > >> >> On May 12, 2004, at 12:33 AM, Poul-Henning Kamp wrote: >> >>> In message <FFA2CCA5-A3DD-11D8-A0B4-003065A70D30_at_shire.net>, "Chad >>> Leigh -- Shi >>> re.Net LLC" writes: >>>> Hi >>>> >>>> I realize that the ATA/SATA support is evolving and ongoing. I just >>>> wanted to know what the current level of support is for the SiI 3114 >>>> SATA controller in -CURRENT. I want to use it with plain old >>>> disks, >>>> not in any raid mode. >>>> >>>> I have a Tyan S2882 dual Opteron board running FreeBSD 5.2-CURRENT >>>> (updated May 11) running i386 version. >>> >>> With the last commit from sos_at_ (yesterday I think) the Sil3114 works >>> on my S2882. >>> >> >> Hi All >> >> Ok, I finally got around to upgrading to the latest -CURRENT around >> 7am UTC June 10. I re-enabled the SiL 3114 in plain disk mode in the >> mb bios and booted. There is one disk plugged into the mb SATA ports >> and 2 still plugged in to the Promise controller I have been using. >> (I also tried it with all 3 plugged into the mb). On boot with the >> latest -CURRENT, the system no longer crashes. However, even though >> the BIOS lists the disks correctly on POST, FreeBSD shows no SATA >> disks. (I boot off a SCSI RAID array on an Adaptec 2200S). Sorry to keep following-on to myself. The above is unclear. FreeBSD shows no SATA on the SiI 3114 controller. The ones on the promise controller always show up. >> > > As a follow-on, here is the dmesg info showing both the promise and > SiI 3114 controllers > > atapci0: <Promise PDC20375 SATA150 controller> port > 0xb000-0xb07f,0xb400-0xb40f,0xbc00-0xbc3f mem > 0xfeaa0000-0xfeabffff,0xfeafe000-0xfeafefff irq 16 at device 4.0 on > pci3 > atapci0: failed: rid 0x20 is memory, requested 4 > ata2: at 0xfeafe000 on atapci0 > ata3: at 0xfeafe000 on atapci0 > ata4: at 0xfeafe000 on atapci0 > atapci1: <SiI 3114 SATA150 controller> port > 0x9c00-0x9c0f,0xa000-0xa003,0xa400-0xa407,0xa800-0xa803,0xac00-0xac07 > mem 0xfeafdc00-0xfeafdfff irq 19 at device 5.0 on pci3 > ata5: at 0xfeafdc00 on atapci1 > ata6: at 0xfeafdc00 on atapci1 > ata7: at 0xfeafdc00 on atapci1 > ata8: at 0xfeafdc00 on atapci1 > > > Thanks > Chad > > _______________________________________________ > freebsd-current_at_freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-current > To unsubscribe, send any mail to > "freebsd-current-unsubscribe_at_freebsd.org"Received on Thu Jun 10 2004 - 16:53:59 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:56 UTC