I'm running yesterdays current but this problem have probably been there for a while since I don't normally use any USB gadgets. Chipset: Serverworks III-LE USB hw: ohci controller on motherboard - 7in1 cardreader, logitech mouse. Symptoms: Cardreader hangs system with CF inserted, mousepointer visoble but does not move. Without ACPI I can use both the cardreader and the mouse. What should I do to help debug this? /Martin dmesg from Boot with ACPI enabled. Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2-CURRENT #0: Wed Jun 16 23:41:00 CEST 2004 root_at_freedom7.gneto.com:/usr/obj/home/FreeBSD/FreeBSD-current/src/sys/FREEDOM7 Preloaded elf kernel "/boot/kernel/kernel" at 0xc0abd000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0abd26c. ACPI APIC Table: <RCC RCCNILE > Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Celeron(TM) CPU 1400MHz (1396.27-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6b4 Stepping = 4 Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 536805376 (511 MB) avail memory = 515616768 (491 MB) ACPI-0697: *** Warning: Type override - [DEB_] had invalid type (Integer) for Scope operator, changed to (Scope) ACPI-0697: *** Warning: Type override - [MLIB] had invalid type (Integer) for Scope operator, changed to (Scope) ACPI-0697: *** Warning: Type override - [IO__] had invalid type (Integer) for Scope operator, changed to (Scope) ACPI-0697: *** Warning: Type override - [DATA] had invalid type (String) for Scope operator, changed to (Scope) ACPI-0697: *** Warning: Type override - [SIO_] had invalid type (String) for Scope operator, changed to (Scope) ACPI-0697: *** Warning: Type override - [SB__] had invalid type (String) for Scope operator, changed to (Scope) ACPI-0697: *** Warning: Type override - [PM__] had invalid type (String) for Scope operator, changed to (Scope) ACPI-0697: *** Warning: Type override - [ICNT] had invalid type (String) for Scope operator, changed to (Scope) ACPI-0697: *** Warning: Type override - [ACPI] had invalid type (String) for Scope operator, changed to (Scope) ACPI-0697: *** Warning: Type override - [CSB5] had invalid type (String) for Scope operator, changed to (Scope) ACPI-0697: *** Warning: Type override - [PM__] had invalid type (String) for Scope operator, changed to (Scope) ACPI-0697: *** Warning: Type override - [BIOS] had invalid type (Integer) for Scope operator, changed to (Scope) ACPI-0697: *** Warning: Type override - [CMOS] had invalid type (Integer) for Scope operator, changed to (Scope) ACPI-0697: *** Warning: Type override - [OEM_] had invalid type (Integer) for Scope operator, changed to (Scope) ioapic0: Changing APIC ID to 4 ioapic1: Changing APIC ID to 5 MADT: Forcing active-low polarity and level trigger for SCI ioapic0 <Version 1.1> irqs 0-15 on motherboard ioapic1 <Version 1.1> irqs 16-31 on motherboard random: <entropy source, Software, Yarrow> Pentium Pro MTRR support enabled npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <RCC RCCNILE> on motherboard acpi0: [GIANT-LOCKED] Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 pcibios: BIOS version 2.10 unknown: dependant functions not supported ... lots of these ... unknown: dependant functions not supported acpi_timer0: <32-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0 cpu0: <ACPI CPU> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib0: slot 15 INTA is routed to irq 10 fxp0: <Intel 82559 Pro/100 Ethernet> port 0xb800-0xb83f mem 0xfe800000-0xfe8fffff,0xfe9fb000-0xfe9fbfff irq 20 at device 2.0 on pci0 miibus0: <MII bus> on fxp0 inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: Ethernet address: 00:c0:9f:08:79:63 fxp0: [GIANT-LOCKED] pci0: <unknown> at device 6.0 (no driver attached) pci0: <network, ethernet> at device 9.0 (no driver attached) pci0: <display, VGA> at device 11.0 (no driver attached) isab0: <PCI-ISA bridge> at device 15.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <ServerWorks CSB5 UDMA100 controller> port 0xffa0-0xffaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 15.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 ohci0: <OHCI (generic) USB controller> mem 0xfe9fe000-0xfe9fefff irq 10 at device 15.2 on pci0 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 4 ports with 4 removable, self powered ums0: B16_b_02 USB-PS/2 Optical Mouse, rev 2.00/98.02, addr 2, iclass 3/1 ums0: 4 buttons and Z dir. umass0: Genesys Logic Flash Reader, rev 2.00/1.25, addr 3 umass0: SCSI over Bulk-Only; quirks = 0x0000 umass0:0:0:-1: Attached to scbus0 pcib1: <ACPI Host-PCI bridge> on acpi0 pci1: <ACPI PCI bus> on pcib1 pcib2: <PCI-PCI bridge> at device 2.0 on pci1 pci2: <PCI bus> on pcib2 amr0: <LSILogic MegaRAID> mem 0xfc4f0000-0xfc4fffff irq 16 at device 2.1 on pci1 amr0: [GIANT-LOCKED] amr0: <Series 467> Firmware H79N, BIOS 2.10, 128MB RAM ti0: <Netgear GA620 1000baseT Gigabit Ethernet> mem 0xfebf4000-0xfebf7fff irq 18 at device 3.0 on pci1 ti0: Ethernet address: 00:02:e3:00:48:8b ti0: [GIANT-LOCKED] acpi_button0: <Power Button> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] fdc0: I/O to control range incorrect sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0 ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 fdc0: I/O to control range incorrect orm0: <Option ROMs> at iomem 0xc8800-0xc9fff,0xc0000-0xc7fff on isa0 pmtimer0 on isa0 fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 1396274285 Hz quality 800 Timecounters tick every 10.000 msec ad0: 29314MB <IBM-DTLA-307030> [59560/16/63] at ata0-master UDMA100 acd0: CDROM <ATAPI-CD ROM-DRIVE-56MAX> at ata1-master UDMA33 umass0: BBB reset failed, TIMEOUT umass0: BBB bulk-in clear stall failed, TIMEOUT umass0: BBB bulk-out clear stall failed, TIMEOUT umass0: BBB reset failed, TIMEOUT umass0: BBB bulk-in clear stall failed, TIMEOUT umass0: BBB bulk-out clear stall failed, TIMEOUT umass0: BBB reset failed, TIMEOUT umass0: BBB bulk-in clear stall failed, TIMEOUT umass0: BBB bulk-out clear stall failed, TIMEOUT umass0: BBB reset failed, TIMEOUT umass0: BBB bulk-in clear stall failed, TIMEOUT umass0: BBB bulk-out clear stall failed, TIMEOUT umass0: BBB reset failed, TIMEOUT umass0: BBB bulk-in clear stall failed, TIMEOUT umass0: BBB bulk-out clear stall failed, TIMEOUT .. here i Removed the CF card from the reader ... Mounting root from ufs:/dev/ad0s1a ti0: gigabit link up ti0: gigabit link up usbd_setup_pipe: failed to start endpoint, TIMEOUTReceived on Thu Jun 17 2004 - 13:40:21 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:57 UTC