I'm attempting to use a universal smart drive(www.universalsmartdrive.com). I see no effect when adding or removing the usb device from the computer. yes, umass is loaded. usbd is also running. I see no da0 in /dev. and I see no messages in /var/log/messages. I am using an asus a7v266 board and usb is enabled in cmos. -Darren # SCSI Controllers device ahb # EISA AHA1742 family device ahc # AHA2940 and onboard AIC7xxx devices device ahd # AHA39320/29320 and onboard AIC79xx devices device amd # AMD 53C974 (Tekram DC-390(T)) device isp # Qlogic family device mpt # LSI-Logic MPT-Fusion #device ncr # NCR/Symbios Logic device sym # NCR/Symbios Logic (newer chipsets + those of `ncr') device trm # Tekram DC395U/UW/F DC315U adapters device adv # Advansys SCSI adapters device adw # Advansys wide SCSI adapters device aha # Adaptec 154x SCSI adapters device aic # Adaptec 15[012]x SCSI adapters, AIC-6[23]60. device bt # Buslogic/Mylex MultiMaster SCSI adapters device ncv # NCR 53C500 device nsp # Workbit Ninja SCSI-3 device stg # TMC 18C30/18C50 # SCSI peripherals device scbus # SCSI bus (required for SCSI) device ch # SCSI media changers device da # Direct Access (disks) device sa # Sequential Access (tape etc) device cd # CD device pass # Passthrough device (direct SCSI access) device ses # SCSI Environmental Services (and SAF-TE) %uname -a FreeBSD chatcanada.net 5.2.1-RELEASE-p8 FreeBSD 5.2.1-RELEASE-p8 #49: Sun May 30 23:43:19 MDT 2004 root_at_chatcanada.net:/usr/obj/usr/src/sys/DARREN i386 %Received on Wed Jun 23 2004 - 01:43:26 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:58 UTC