Project Evil - RTSThreshold

Hello.                  << 6/25/2004

RELENG_5_2.
hardware: adm8211.

cvsup of sys/compat/ndis, sys/modules/ndis/, sys/modules/if_ndis
cvsup's been made 2 days ago.
made copy of .inf and .sys  to sys/modules/if_ndis
run ndiscvt
make && make load in both sys/modules/ndis, sys/modules/if_ndis


ndis0: <802.11b Wireless PCI Card> port 0x3000-0x30ff mem 0xf4200000-0xf42003ff irq 21 at device 5.0 on pci3
can't re-use a leaf (RTSThreshold)!
ndis0: NDIS API version: 5.0
ndis0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps

ifconfig ndis0 inet 192.168.1.102 netmask 255.255.255.0 channel 6 ssid
"myssid" media auto

ndis0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
        inet 192.168.1.102 netmask 0xffffff00 broadcast 192.168.1.255
        ether 00:e0:98:bd:b7:3e
        media: IEEE 802.11 Wireless Ethernet autoselect
        status: no carrier
        ssid ""
        channel -1 authmode OPEN powersavemode OFF powersavesleep 100
        wepmode OFF weptxkey 1


Could a bad connection between card and antenna lead to "can't re-use a
leaf (RTSThreshold)!"?
Is this bad connection causes "status: no carrier" or because of RTS
Threshold?

Can't set SSID and get right status.

Thank you.
--

MAin D. ToRK

  mail_at_tork.spb.ru
  tork_at_synomatic.com