just an FYI. I've tried booting without acpi, i've rebuilt the kernel without pcm, then loaded snd_pcm and snd_masstro (from multi user) which made the laptop reboot when i hit enter (kldload snd_mastro<ENTER> system reboot). No panic, just reboot. i also had to turn the laptop off as this messed up the video for some reason. Then i tried loading from the boot loader (load snd_pcm, load snd_maestro) and still no go. Same errors as above. oh btw i tried the module with acpi also. I also did a boot -v after loading the modules. Once i get a blank cd i'll try a live 4.x cd. Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2-CURRENT #4: Sat Feb 28 01:59:41 GMT 2004 root_at_laptopwi.unixjunkie.com:/usr/obj/usr/src/sys/LAPTOP Preloaded elf kernel "/boot/kernel/kernel" at 0xc084b000. Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc084b2a0. Preloaded elf module "/boot/kernel/snd_maestro.ko" at 0xc084b34c. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc084b3fc. Calibrating clock(s) ... i8254 clock: 1193165 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 399923847 Hz CPU: Pentium II/Pentium II Xeon/Celeron (399.92-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x66a Stepping = 10 Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PA T,PSE36,MMX,FXSR> real memory = 201195520 (191 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000c29000 - 0x000000000bc4ffff, 184709120 bytes (45095 pages) avail memory = 187191296 (178 MB) bios32: Found BIOS32 Service Directory header at 0xc00f0210 bios32: Entry = 0xfc3b9 (c00fc3b9) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0xedcd pnpbios: Found PnP BIOS data at 0xc00f8ed0 pnpbios: Entry = f0000:933a Rev = 1.0 pnpbios: Event flag at 510 pnpbios: OEM ID d933f351 Other BIOS signatures found: wlan: <802.11 Link Layer> mem: <memory & I/O> Pentium Pro MTRR support enabled random: <entropy source> null: <null device, zero device> npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <TOSHIB 750> on motherboard acpi0: Power Button (fixed) ACPI timer looks BAD min = 2, max = 7, width = 5 ACPI timer looks BAD min = 1, max = 16777215, width = 16777214 ACPI timer looks BAD min = 1, max = 8, width = 7 ACPI timer looks BAD min = 2, max = 8, width = 6 ACPI timer looks BAD min = 1, max = 16777211, width = 16777210 ACPI timer looks BAD min = 1, max = 8, width = 7 ACPI timer looks BAD min = 2, max = 8, width = 6 ACPI timer looks BAD min = 2, max = 8, width = 6 ACPI timer looks BAD min = 2, max = 8, width = 6 ACPI timer looks BAD min = 1, max = 16777215, width = 16777214 Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0xfe08-0xfe0b on acpi0 acpi_cpu0: <CPU> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71928086) pcibios: BIOS version 2.10 Found $PIR table, 7 entries at 0xc00f0180 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs embedded 0 2 A 0x60 11 embedded 0 2 B 0x61 11 embedded 0 10 A 0x62 11 embedded 0 4 A 0x60 11 embedded 0 7 A 0xff 3 embedded 0 12 A 0x61 11 embedded 0 5 D 0x63 11 slot 1 0 6 A 0x62 11 slot 1 0 6 B 0x63 11 slot 1 0 6 C 0x60 11 slot 1 0 6 D 0x61 11 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 ---- initial configuration ------------------------ \\_SB_.LNKA irq 11: [ 5 6 7 10 11 12] low,level,sharable 0.2.0 \\_SB_.LNKB irq 11: [ 5 6 7 10 11 12] low,level,sharable 0.2.1 \\_SB_.LNKC irq 11: [ 5 6 7 10 11 12] low,level,sharable 0.10.0 \\_SB_.LNKA irq 11: [ 5 6 7 10 11 12] low,level,sharable 0.4.0 \\_SB_.LNKE irq 3: [ 3 4] low,level,sharable 0.7.0 \\_SB_.LNKD irq 11: [ 5 6 7 10 11 12] low,level,sharable 0.9.0 \\_SB_.LNKB irq 11: [ 5 6 7 10 11 12] low,level,sharable 0.12.0 \\_SB_.LNKD irq 11: [ 5 6 7 10 11 12] low,level,sharable 0.5.3 \\_SB_.LNKC irq 11: [ 5 6 7 10 11 12] low,level,sharable 0.6.0 \\_SB_.LNKD irq 11: [ 5 6 7 10 11 12] low,level,sharable 0.6.1 ---- before setting priority for links ------------ ---- before fixup boot-disabled links ------------- ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- \\_SB_.LNKA irq 11: [ 5 6 7 10 11 12] low,level,sharable 0.2.0 \\_SB_.LNKB irq 11: [ 5 6 7 10 11 12] low,level,sharable 0.2.1 \\_SB_.LNKC irq 11: [ 5 6 7 10 11 12] low,level,sharable 0.10.0 \\_SB_.LNKA irq 11: [ 5 6 7 10 11 12] low,level,sharable 0.4.0 \\_SB_.LNKE irq 3: [ 3 4] low,level,sharable 0.7.0 \\_SB_.LNKD irq 11: [ 5 6 7 10 11 12] low,level,sharable 0.9.0 \\_SB_.LNKB irq 11: [ 5 6 7 10 11 12] low,level,sharable 0.12.0 \\_SB_.LNKD irq 11: [ 5 6 7 10 11 12] low,level,sharable 0.5.3 \\_SB_.LNKC irq 11: [ 5 6 7 10 11 12] low,level,sharable 0.6.0 \\_SB_.LNKD irq 11: [ 5 6 7 10 11 12] low,level,sharable 0.6.1 pci0: <ACPI PCI bus> on pcib0 pci0: physical bus=0 map[10]: type 3, range 32, base e0000000, size 28, enabled found-> vendor=0x8086, dev=0x7192, revid=0x03 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2200, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) pcib0: matched entry for 0.2.INTA (source \\_SB_.LNKA) pcib0: slot 2 INTA is routed to irq 11 found-> vendor=0x1179, dev=0x060a, revid=0x07 bus=0, slot=2, func=0 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0000, statreg=0x0480, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 pcib0: matched entry for 0.2.INTB (source \\_SB_.LNKB) pcib0: slot 2 INTB is routed to irq 11 found-> vendor=0x1179, dev=0x060a, revid=0x07 bus=0, slot=2, func=1 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0000, statreg=0x0480, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 map[10]: type 1, range 32, base ff800000, size 22, enabled map[14]: type 1, range 32, base ff7e0000, size 17, enabled map[18]: type 1, range 32, base ff000000, size 22, enabled pcib0: matched entry for 0.4.INTA (source \\_SB_.LNKA) pcib0: slot 4 INTA is routed to irq 11 found-> vendor=0x1023, dev=0x9525, revid=0x49 bus=0, slot=4, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x08 (240 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 1 supports D0 D1 D2 D3 current D0 found-> vendor=0x8086, dev=0x7110, revid=0x02 bus=0, slot=5, func=0 class=06-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 0000fe60, size 4, enabled found-> vendor=0x8086, dev=0x7111, revid=0x01 bus=0, slot=5, func=1 class=01-01-80, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 0000ffe0, size 5, enabled pcib0: matched entry for 0.5.INTD (source \\_SB_.LNKD) pcib0: slot 5 INTD is routed to irq 11 found-> vendor=0x8086, dev=0x7112, revid=0x01 bus=0, slot=5, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=11 map[90]: type 4, range 32, base 0000fe70, size 4, enabled found-> vendor=0x8086, dev=0x7113, revid=0x02 bus=0, slot=5, func=3 class=06-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 1, range 32, base ffefff00, size 8, enabled map[14]: type 4, range 32, base 000002f8, size 3, enabled map[18]: type 4, range 32, base 00001c00, size 8, enabled pcib0: matched entry for 0.7.INTA (source \\_SB_.LNKE) pcib0: slot 7 INTA is routed to irq 3 found-> vendor=0x11c1, dev=0x0441, revid=0x01 bus=0, slot=7, func=0 class=07-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0xfc (63000 ns), maxlat=0x0e (3500 ns) intpin=a, irq=3 powerspec 2 supports D0 D2 D3 current D0 map[10]: type 4, range 32, base 0000ff80, size 5, enabled pcib0: matched entry for 0.10.INTA (source \\_SB_.LNKC) pcib0: slot 10 INTA is routed to irq 11 found-> vendor=0x1179, dev=0x0701, revid=0x23 bus=0, slot=10, func=0 class=07-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0400, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[10]: type 4, range 32, base 0000fc00, size 8, enabled pcib0: matched entry for 0.12.INTA (source \\_SB_.LNKB) pcib0: slot 12 INTA is routed to irq 11 found-> vendor=0x125d, dev=0x1978, revid=0x10 bus=0, slot=12, func=0 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x18 (6000 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 cbb0: <ToPIC95B PCI-CardBus Bridge> irq 11 at device 2.0 on pci0 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb0: [MPSAFE] cbb0: PCI Configuration space: 0x00: 0x060a1179 0x04800007 0x06070007 0x00820000 0x10: 0x88000000 0x04800000 0x00141400 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffc 0x30: 0x00000000 0x0000fffc 0x00000000 0x0400010b 0x40: 0x00011179 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x00000000 0x00000000 0x00000000 0x01000000 0x90: 0x00000000 0x00000000 0x00000000 0x00000000 0xa0: 0x860010f0 0x00000002 0x00000000 0x0000d100 0xb0: 0x3f3f3fcf 0x0a081020 0x00010100 0x000003f1 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000008 cbb1: <ToPIC95B PCI-CardBus Bridge> irq 11 at device 2.1 on pci0 cardbus1: <CardBus bus> on cbb1 pccard1: <16-bit PCCard bus> on cbb1 cbb1: [MPSAFE] cbb1: PCI Configuration space: 0x00: 0x060a1179 0x04800007 0x06070007 0x00820000 0x10: 0x88001000 0x04800000 0x00151500 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffc 0x30: 0x00000000 0x0000fffc 0x00000000 0x0400020b 0x40: 0x00011179 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x00000000 0x00000000 0x00000000 0x01000000 0x90: 0x00000000 0x00000000 0x00000000 0x00000000 0xa0: 0x860020f0 0x00000002 0x00000000 0x0000d100 0xb0: 0x3f3f3fcf 0x0a081020 0x00010100 0x000003f1 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000008 pci0: <display, VGA> at device 4.0 (no driver attached) PCI-ISA bridge with incorrect subclass 0x80 PCI-ISA bridge with incorrect subclass 0x80 isab0: <PCI-ISA bridge> at device 5.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 UDMA33 controller> port 0xfe60-0xfe6f at device 5.1 on pci 0 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80 ata0-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80 ata0-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80 ata0-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80 ata0-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80 ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 mask=03 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: reset tp1 mask=03 ostat0=50 ostat1=00 ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb ata1-slave: stat=0x00 err=0x04 lsb=0x14 msb=0xeb ata1: reset tp2 mask=03 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER> ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] pci0: <serial bus, USB> at device 5.2 (no driver attached) pci0: <bridge, PCI-unknown> at device 5.3 (no driver attached) pci0: <simple comms> at device 7.0 (no driver attached) pci0: <simple comms> at device 10.0 (no driver attached) pcm0: <ESS Technology Maestro-2E> port 0xfc00-0xfcff irq 11 at device 12.0 on pc i0 setmap (1e4000, 4000), nseg=1, error=0 pcm0: Maestro DMA base: 0x1e4000 pcm0: agg_rdcodec() RW_DONE timed out. pcm0: agg_rdcodec() PROGLESS timed out. pcm0: agg_rdcodec() RW_DONE timed out. pcm0: agg_wrcodec() PROGLESS timed out. pcm0: agg_rdcodec() PROGLESS timed out. pcm0: agg_rdcodec() RW_DONE timed out. pcm0: agg_wrcodec() PROGLESS timed out. pcm0: agg_rdcodec() PROGLESS timed out. pcm0: agg_rdcodec() RW_DONE timed out. pcm0: agg_wrcodec() PROGLESS timed out. pcm0: agg_rdcodec() PROGLESS timed out. pcm0: agg_rdcodec() RW_DONE timed out. pcm0: agg_wrcodec() PROGLESS timed out. pcm0: agg_rdcodec() PROGLESS timed out. pcm0: agg_rdcodec() RW_DONE timed out. pcm0: agg_wrcodec() PROGLESS timed out. pcm0: agg_rdcodec() PROGLESS timed out. pcm0: agg_rdcodec() RW_DONE timed out. pcm0: agg_wrcodec() PROGLESS timed out. pcm0: agg_rdcodec() PROGLESS timed out. pcm0: agg_rdcodec() RW_DONE timed out. pcm0: agg_wrcodec() PROGLESS timed out. pcm0: agg_rdcodec() PROGLESS timed out. pcm0: agg_rdcodec() RW_DONE timed out. pcm0: agg_wrcodec() PROGLESS timed out. pcm0: agg_rdcodec() PROGLESS timed out. pcm0: agg_rdcodec() RW_DONE timed out. pcm0: agg_wrcodec() PROGLESS timed out. pcm0: agg_rdcodec() PROGLESS timed out. pcm0: agg_rdcodec() RW_DONE timed out. pcm0: agg_wrcodec() PROGLESS timed out. pcm0: <Asahi Kasei AK4540 AC97 Codec (id = 0x414b4d00)> pcm0: Codec features 0 bit master volume, no 3D Stereo Enhancement pcm0: agg_rdcodec() PROGLESS timed out. pcm0: agg_rdcodec() RW_DONE timed out. pcm0: ac97 codec reports dac not ready pcm0: agg_wrcodec() PROGLESS timed out. pcm0: agg_wrcodec() PROGLESS timed out. setmap (202000, 4000), nseg=1, error=0 pcm0: pch[0].offset = 0x1e000 setmap (206000, 4000), nseg=1, error=0 pcm0: pch[1].offset = 0x22000 setmap (211000, 4000), nseg=1, error=0 pcm0: pch[2].offset = 0x2d000 setmap (222000, 4000), nseg=1, error=0 pcm0: pch[3].offset = 0x3e000 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_cmbat0: <Control Method Battery> on acpi0 acpi_acad0: <AC Adapter> on acpi0 unknown: not probed (disabled) atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 psm0: unable to allocate IRQ psmcpnp0 irq 12 on acpi0 psm0: current command byte:0047 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model GlidePoint, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000000, packet size:3 psm0: syncmask:c0, syncbits:00 fdc0: <NEC 765 or clone> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0 fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0: irq maps: 0x241 0x251 0x251 0x251 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A ppc0: using extended I/O port range ppc0: ECP SPP SPP ppc0 port 0x778-0x77a,0x378-0x37f irq 7 drq 3 on acpi0 ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 plip0: bpf attached lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it fdc: fdc0 already exists; skipping it ppc: ppc0 already exists; skipping it sio: sio0 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 orm0: <Option ROMs> at iomem 0xe8000-0xebfff,0xc0000-0xcbfff on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fe0: not probed (disabled) ie0: not probed (disabled) le0: not probed (disabled) lnc0: not probed (disabled) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0x241 0x241 0x241 0x241 sio1: probe failed test(s): 0 1 2 4 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. procfs registered Timecounter "TSC" frequency 399923847 Hz quality 800 Timecounters tick every 10.000 msec IPsec: Initialized Security Association Processing. lo0: bpf attached ata1: spurious interrupt - status=0x00 error=0x04 acpi_cpu0: set speed to 100.0% acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0% acpi_cmbat0: battery initialization start acpi_cmbat0: battery initialization done, tried 1 times acpi_acad0: acline initialization start acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times pccard0: CIS version PC Card Standard 5.0 pccard0: CIS info: SMC, SMC2632W, Version 01.02, pccard0: Manufacturer code 0x156, product 0x2 pccard0: function 0: network adapter, ccr addr 3e0 mask 1 pccard0: function 0, config table entry 1: I/O card; irq mask ffff; iomask 6, io space 0-3f; io16 irqpulse irqlevel wi0: <SMC SMC2632W> at port 0x100-0x13f irq 11 function 0 config 1 on pccard0 wi0: 802.11 address: 00:04:e2:29:3a:b0 wi0: using RF:PRISM2 MAC:HFA3841 CARD:HWB3163 rev.A wi0: Intersil Firmware: Primary (0.3.0), Station (0.8.3) wi0: bpf attached wi0: bpf attached wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps wi0: bpf attached ata0-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin ata0-master: setting PIO4 on Intel PIIX4 chip ata0-master: setting UDMA33 on Intel PIIX4 chip ad0: <IBM-DBCA-206480/BC4OA82F> ATA-4 disk at ata0-master ad0: 6194MB (12685680 sectors), 13424 C, 15 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA33 GEOM: new disk ad0 ar: FreeBSD check1 failed ata1-master: pio=0x0c wdma=0x22 udma=0xffffffff cable=40pin ata1-master: setting PIO4 on Intel PIIX4 chip acd0: <TOSHIBA DVD-ROM SD-C2102/1329> DVDROM drive at ata1 as master acd0: read 3445KB/s (3445KB/s), 128KB buffer, PIO4 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR acd0: Writes: acd0: Audio: play, 16 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/14/63 s:63 l:12685617 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad0s1, start 32256 length 6495035904 end 6495068159 GEOM: Configure ad0s1a, start 0 length 268435456 end 268435455 GEOM: Configure ad0s1b, start 268435456 length 268435456 end 536870911 GEOM: Configure ad0s1c, start 0 length 6495035904 end 6495035903 GEOM: Configure ad0s1d, start 536870912 length 5958164992 end 6495035903 Mounting root from ufs:/dev/ad0s1a start_init: trying /sbin/init uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xffe0-0xffff irq 11 at de vice 5.2 on pci0 usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self poweredReceived on Mon Mar 01 2004 - 07:30:52 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:45 UTC