Problem with BFE driver

From: Mark Bath <Mark_at_Baggywrinkle.co.uk>
Date: Wed, 3 Mar 2004 16:09:08 +0000
I'm hopping someone can help.

I have installed FreeBSD 5.2.1 and am getting the following error

bfe0: watchdog timeout -- resetting

The following occurs as the result of heavy network traffic to the NFS  
server running on the box.

The following is the output of dmesg

Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
         The Regents of the University of California. All rights  
reserved.
FreeBSD 5.2.1-RELEASE #1: Tue Mar  2 09:25:17 GMT 2004
     root_at_buddy:/usr/obj/export/1/FreeBSD/5.2/src/sys/BUDDY
Preloaded elf kernel "/boot/kernel/kernel" at 0xc07c3000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc07c326c.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Celeron(R) CPU 2.40GHz (2405.47-MHz 686-class CPU)
   Origin = "GenuineIntel"  Id = 0xf29  Stepping = 9
    
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE 
,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
real memory  = 536788992 (511 MB)
avail memory = 515923968 (492 MB)
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <ASUS   P4PE-X  > on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 12 entries at 0xc00f23b0
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_cpu1: <CPU> on acpi0
device_probe_and_attach: acpi_cpu1 attach returned 6
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 29 INTA is routed to irq 5
pcib0: slot 29 INTB is routed to irq 9
pcib0: slot 29 INTC is routed to irq 6
pcib0: slot 31 INTA is routed to irq 6
agp0: <Intel Generic host to PCI bridge> mem 0xfd000000-0xfdffffff at  
device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib1: slot 0 INTA is routed to irq 5
pci1: <display, VGA> at device 0.0 (no driver attached)
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xb800-0xb81f  
irq 5 at device 29.0 on pci0
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xb400-0xb41f  
irq 9 at device 29.1 on pci0
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xb000-0xb01f  
irq 6 at device 29.2 on pci0
usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib2: slot 10 INTA is routed to irq 9
pcib2: slot 11 INTA is routed to irq 11
pcib2: slot 13 INTA is routed to irq 9
pcib2: slot 14 INTA is routed to irq 6
bfe0: <Broadcom BCM4401 Fast Ethernet> mem 0xee000000-0xee001fff at  
device 5.0 on pci2
pcib2: slot 5 INTA is routed to irq 10
bfe0: Ethernet address: 00:0b:6a:f4:50:81
miibus0: <MII bus> on bfe0
bmtphy0: <BCM4401 10/100baseTX PHY> on miibus0
bmtphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
atapci0: <Promise PDC20318 SATA150 controller> port  
0xa000-0xa07f,0xa400-0xa40f,0xa800-0xa83f mem  
0xed000000-0xed01ffff,0xed800000-0xed800fff irq 9 at device 10.0 on  
pci2
atapci0: [MPSAFE]
ata2: at 0xed800000 on atapci0
ata2: [MPSAFE]
ata3: at 0xed800000 on atapci0
ata3: [MPSAFE]
ata4: at 0xed800000 on atapci0
ata4: [MPSAFE]
ata5: at 0xed800000 on atapci0
ata5: [MPSAFE]
ahc0: <Adaptec 2940A Ultra SCSI adapter> port 0x9800-0x98ff mem  
0xec800000-0xec800fff irq 11 at device 11.0 on pci2
aic7860: Ultra Single Channel A, SCSI Id=7, 3/253 SCBs
ahc1: <Adaptec 2940 Ultra SCSI adapter> port 0x9400-0x94ff mem  
0xec000000-0xec000fff irq 9 at device 13.0 on pci2
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
atapci1: <Promise PDC20318 SATA150 controller> port  
0x8400-0x847f,0x8800-0x880f,0x9000-0x903f mem  
0xeb000000-0xeb01ffff,0xeb800000-0xeb800fff irq 6 at device 14.0 on  
pci2
atapci1: [MPSAFE]
ata6: at 0xeb800000 on atapci1
ata6: [MPSAFE]
ata7: at 0xeb800000 on atapci1
ata7: [MPSAFE]
ata8: at 0xeb800000 on atapci1
ata8: [MPSAFE]
ata9: at 0xeb800000 on atapci1
ata9: [MPSAFE]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci2: <Intel ICH4 UDMA100 controller> port  
0xf000-0xf00f,0-0x3,0-0x7,0-0x3,0-0x7 irq 6 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci2
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci2
ata1: [MPSAFE]
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
acpi_cpu1: <CPU> on acpi0
device_probe_and_attach: acpi_cpu1 attach returned 6
orm0: <Option ROMs> at iomem  
0xd4000-0xd47ff,0xd0000-0xd07ff,0xc0000-0xcafff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on  
isa0
Timecounter "TSC" frequency 2405465704 Hz quality 800
Timecounters tick every 10.000 msec
GEOM: create disk ad0 dp=0xc4445060
ad0: 38166MB <ST340014A> [77545/16/63] at ata0-master UDMA100
ata1-slave: FAILURE - ATAPI_IDENTIFY no interrupt
ata1-slave: FAILURE - ATAPI_IDENTIFY status=1<ERROR>  
error=1<ILLEGAL_LENGTH> LBA=0
ata1-slave: FAILURE - ATAPI_IDENTIFY no interrupt
ata1-slave: FAILURE - ATAPI_IDENTIFY status=1<ERROR>  
error=1<ILLEGAL_LENGTH> LBA=0
ast0: TAPE <Seagate STT8000A> at ata1-master PIO4
GEOM: create disk ad4 dp=0xc4530360
ad4: 76319MB <ST380013AS> [155061/16/63] at ata2-master UDMA133
GEOM: create disk ad6 dp=0xc4530160
ad6: 152627MB <ST3160023AS> [310101/16/63] at ata3-master UDMA133
GEOM: create disk ad8 dp=0xc4530860
ad8: 152627MB <ST3160023AS> [310101/16/63] at ata4-master UDMA133
GEOM: create disk ad10 dp=0xc4530a60
ad10: 152627MB <ST3160023AS> [310101/16/63] at ata5-master UDMA133
GEOM: create disk ad12 dp=0xc4530c60
ad12: 76319MB <ST380013AS> [155061/16/63] at ata6-master UDMA133
GEOM: create disk ad14 dp=0xc4534860
ad14: 152627MB <ST3160023AS> [310101/16/63] at ata7-master UDMA133
GEOM: create disk ad16 dp=0xc4533e60
ad16: 152627MB <ST3160023AS> [310101/16/63] at ata8-master UDMA133
GEOM: create disk ad18 dp=0xc4533d60
ad18: 152627MB <ST3160023AS> [310101/16/63] at ata9-master UDMA133
Mounting root from ufs:/dev/ad0s1a


---
Mark Bath
Mark_at_Baggywrinkle.co.uk
Fingerprint = 3F69 3898 21E9 42D0 D328  FA3F 8767 8357 0A2A A0E2
Received on Wed Mar 03 2004 - 07:09:12 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:46 UTC