On 18.03-09:53, Doug White wrote: > On Wed, 17 Mar 2004, n0g0013 wrote: > > > have the following pci cardbus controller but > > cannot get it to initialise. > > > > : none2_at_pci0:13:0: class=0x060700 card=0x00000000 \ > > : chip=0xac50104c rev=0x01 hdr=0x02 > > : vendor = 'Texas Instruments (TI)' > > : device = 'PCI1410 PC card cardBus Controller' > > : class = bridge > > : subclass = PCI-CardBus > > Hm, we appear to support this. You may need to load 'cbb'. At worst > include the bits from GENERIC for pccard/cardbus support that are all > grouped together. [ ... ] thanks, this is the missing moudule (thought it was pccbb) but unfortunately doesn't resolve the issue. i've added : cbb_load="YES" : cardbus_load="YES" : pccard_load="YES" to the loader.conf and 'pciconf -v -l' now returns : cbb0_at_pci0:13:0: class=0x060700 card=0x00000000 \ : chip=0xac50104c rev=0x01 hdr=0x02 : vendor = 'Texas Instruments (TI)' : device = 'PCI1410 PC card cardBus Controller' : class = bridge : subclass = PCI-CardBus and dmesg shows the lot : cbb0: <TI1410 PCI-CardBus Bridge> irq 11 at device \ : 13.0 on pci0 : cardbus0: <CardBus bus> on cbb0 : pccard0: <16-bit PCCard bus> on cbb0 however, still no evidence of results from either : # pccardc dumpcis : 0 slots found or 'pccardd' which logs : Mar 18 22:28:30 eyore pccardd[579]: fatal \ : error: no PC-CARD slots 'fraid i don't know what output would be useful at this juncture - let me know. tia, -- t t zReceived on Thu Mar 18 2004 - 13:48:25 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:48 UTC