pcm0:play:0: play interrupt timeout, channel dead with 2004_03_18 sources

Hi,


When I try to play something, I'm getting the message and no sound (just
noise) with sources from 18 Mar. I'm using modules; the mobo is a
GA-VT600 / 8237 (VIA), on-board sound.

Dmesg snip:

pcib0: matched entry for 0.17.INTC (source \\_SB_.PCI0.ALKC)
pcib0: _PRS has invalid type 7
found-> vendor=0x1106, dev=0x3059, revid=0x60
        bus=0, slot=17, func=5
        class=04-01-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0001, statreg=0x0210, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=c, irq=11
        powerspec 2  supports D0 D1 D2 D3  current D0
        map[10]: type 4, range 32, base 0000e800, size  8, enabled
        map[14]: type 1, range 32, base e2000000, size  8, enabled

pcm0: <VIA VT8233X> port 0xe400-0xe4ff irq 11 at device 17.5 on pci0
pcm0: <Avance Logic ALC655 AC97 Codec (id = 0x414c4760)>
pcm0: Codec features 5 bit master volume, no 3D Stereo Enhancement
pcm0: Primary codec extended features reserved 1, center DAC, surround DAC, LFE DAC, reserved 5
pcm0: sndbuf_setmap 27b000, 1000; 0xc4407000 -> 27b000
pcm0: sndbuf_setmap 2c0000, 1000; 0xc440c000 -> 2c0000
pcm0: sndbuf_setmap 2ac000, 1000; 0xc4438000 -> 2ac000
pcm0: sndbuf_setmap 28a000, 1000; 0xc4436000 -> 28a000
pcm0: sndbuf_setmap 288000, 1000; 0xc4434000 -> 288000
pcm0: sndbuf_setmap 266000, 1000; 0xc4432000 -> 266000

pciconf shows:
pcm0_at_pci0:17:5: class=0x040100 card=0xa0021458 chip=0x30591106 rev=0x60 hdr=0x00
    vendor   = 'VIA Technologies Inc'
    device   = 'VT8233/33A AC97 Enhanced Audio Controller'
    class    = multimedia
    subclass = audio


The change must have happen between 2004_03_04 and 2004_03_18.

The only sound change *I* could find running ident:
-/boot/kernel.old/snd_via8233.ko:
-     $FreeBSD: src/sys/dev/sound/pci/via8233.c,v 1.13 2003/09/02 17:30:37 jhb Exp $
+/boot/kernel/snd_via8233.ko:
+     $FreeBSD: src/sys/dev/sound/pci/via8233.c,v 1.15 2004/03/17 17:50:44 njl Exp $

Booting with the old kernel it works. kldload-ing the old modules it doesn't

The new kernel doesn't have radeondrm; both are with apic; booting with acpi.

If I can help with anything else, please let me know.

Thanks,.

-- 
IOnut
Unregistered ;) FreeBSD user