Bluetooth, HCI timeout.

I can't make my bluetooth Microstar dongle work neither with FreeBSD
-CURRENT (2004/03/22) nor with 5.2.1-RELEASE. As far as I remember it
has been working fine with 5.1-RELEASE (but with another PC). I don't
know what can have an impact on it.

See attached file for 'rc.bluetooth start ubt0' command "output"
(http://artur.black.pl/bluetooth.txt).


# /usr/local/etc/rc.bluetooth start ubt0
ng_hci_process_command_timeout: ubt0hci - unable to complete HCI command OGF=0x3
, OCF=0x3. Timeout
ubt_request_complete2: ubt0 - Control request failed. TIMEOUT (15)
complete_command: ubt0hci - no pending command, state=0x1
ng_hci_process_command_timeout: ubt0hci - unable to complete HCI command OGF=0x4
, OCF=0x9. Timeout
ubt_request_complete2: ubt0 - Control request failed. TIMEOUT (15)
complete_command: ubt0hci - no pending command, state=0x1
BD_ADDR: 00:10:dc:4b:b6:64
ng_hci_process_command_timeout: ubt0hci - unable to complete HCI command OGF=0x4
, OCF=0x3. Timeout
ubt_request_complete2: ubt0 - Control request failed. TIMEOUT (15)
complete_command: ubt0hci - no pending command, state=0x1
Features: 0xff 0xff 0xf 00 00 00 00 00
<3-Slot> <5-Slot> <Encryption> <Slot offset>
<Timing accuracy> <Switch> <Hold mode> <Sniff mode>
<Park mode> <RSSI> <Channel quality> <SCO link>
<HV2 packets> <HV3 packets> <u-law log> <A-law log> <CVSD>
<Paging scheme> <Power control> <Transparent SCO data>
ng_hci_process_command_timeout: ubt0hci - unable to complete HCI command OGF=0x4
, OCF=0x5. Timeout
ubt_request_complete2: ubt0 - Control request failed. TIMEOUT (15)
complete_command: ubt0hci - no pending command, state=0x1
Max. ACL packet size: 192 bytes
Number of ACL packets: 8
Max. SCO packet size: 64 bytes
Number of SCO packets: 8
ng_hci_process_command_timeout: ubt0hci - unable to complete HCI command OGF=0x3
, OCF=0x1a. Timeout
ubt_request_complete2: ubt0 - Control request failed. TIMEOUT (15)
complete_command: ubt0hci - no pending command, state=0x1
ng_hci_process_command_timeout: ubt0hci - unable to complete HCI command OGF=0x3
, OCF=0x24. Timeout
ubt_request_complete2: ubt0 - Control request failed. TIMEOUT (15)
complete_command: ubt0hci - no pending command, state=0x1
ng_hci_process_command_timeout: ubt0hci - unable to complete HCI command OGF=0x3
, OCF=0x13. Timeout
ubt_request_complete2: ubt0 - Control request failed. TIMEOUT (15)
complete_command: ubt0hci - no pending command, state=0x1
Could not execute command "initialize". Device not configured


-- 
// WWW: artur.black.pl // PGP: finger apm_at_acrux.cifrid.net //