Hi all, I hit the problem with current ( tested with 5.2.1-p3 as well ), what after I type reboot, last what I see is: Uptime: xx minutes but actual reboot doesn't happen. I tried to disable acpi - same behavior. Computer is quite old 800 MHz p3. How can I track this problem down ? Here is my dmesg: Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2-CURRENT #3: Wed Mar 24 11:42:49 EET 2004 pilkis_at_lituanica.icnspot.net:/usr/obj/usr/src/sys/lituanica Preloaded elf kernel "/boot/kernel/kernel" at 0xc0726000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc072621c. acpi_alloc_wakeup_handler: can't alloc wake memory Calibrating clock(s) ... i8254 clock: 1193248 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 804025304 Hz CPU: Intel Pentium III (804.03-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x68a Stepping = 10 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 535736320 (510 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000826000 - 0x000000001f5bffff, 517578752 bytes (126362 pages) avail memory = 517206016 (493 MB) bios32: Found BIOS32 Service Directory header at 0xc00f1430 bios32: Entry = 0xf0bf0 (c00f0bf0) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0xdf0 pnpbios: Found PnP BIOS data at 0xc00fbe20 pnpbios: Entry = f0000:be50 Rev = 1.0 pnpbios: OEM ID cd041 Other BIOS signatures found: null: <null device, zero device> mem: <memory & I/O> Pentium Pro MTRR support enabled random: <entropy source> npx0: [GIANT-LOCKED] npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <ASUS CUSL2> on motherboard acpi0: [GIANT-LOCKED] pci_open(1): mode 1 addr port (0x0cf8) is 0x8000005c pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=11308086) pcibios: BIOS version 2.10 Found $PIR table, 10 entries at 0xc00f1360 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs slot 7 254 0 A 0x60 3 4 5 7 9 10 11 12 slot 7 254 0 B 0x61 3 4 5 7 9 10 11 12 embedded 0 2 A 0x60 3 4 5 7 9 10 11 12 embedded 0 31 A 0x60 3 4 5 7 9 10 11 12 embedded 0 31 B 0x61 3 4 5 7 9 10 11 12 embedded 0 31 C 0x6b 3 4 5 7 9 10 11 12 embedded 0 31 D 0x63 3 4 5 7 9 10 11 12 slot 1 1 9 A 0x69 3 4 5 7 9 10 11 12 slot 1 1 9 B 0x6a 3 4 5 7 9 10 11 12 slot 1 1 9 C 0x6b 3 4 5 7 9 10 11 12 slot 1 1 9 D 0x68 3 4 5 7 9 10 11 12 slot 2 1 10 A 0x6a 3 4 5 7 9 10 11 12 slot 2 1 10 B 0x6b 3 4 5 7 9 10 11 12 slot 2 1 10 C 0x68 3 4 5 7 9 10 11 12 slot 2 1 10 D 0x69 3 4 5 7 9 10 11 12 slot 3 1 11 A 0x6b 3 4 5 7 9 10 11 12 slot 3 1 11 B 0x68 3 4 5 7 9 10 11 12 slot 3 1 11 C 0x69 3 4 5 7 9 10 11 12 slot 3 1 11 D 0x6a 3 4 5 7 9 10 11 12 slot 4 1 12 A 0x68 3 4 5 7 9 10 11 12 slot 4 1 12 B 0x69 3 4 5 7 9 10 11 12 slot 4 1 12 C 0x6a 3 4 5 7 9 10 11 12 slot 4 1 12 D 0x6b 3 4 5 7 9 10 11 12 slot 5 1 13 A 0x69 3 4 5 7 9 10 11 12 slot 5 1 13 B 0x6a 3 4 5 7 9 10 11 12 slot 5 1 13 C 0x6b 3 4 5 7 9 10 11 12 slot 5 1 13 D 0x68 3 4 5 7 9 10 11 12 slot 6 1 14 A 0x62 3 4 5 7 9 10 11 12 slot 6 1 14 B 0x63 3 4 5 7 9 10 11 12 slot 6 1 14 C 0x60 3 4 5 7 9 10 11 12 slot 6 1 14 D 0x61 3 4 5 7 9 10 11 12 embedded 1 8 A 0x68 3 4 5 7 9 10 11 12 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 31 func 0 acpi0: Power Button (fixed) ACPI timer looks GOOD min = 3, max = 3, width = 0 ACPI timer looks GOOD min = 3, max = 3, width = 0 ACPI timer looks GOOD min = 3, max = 3, width = 0 ACPI timer looks GOOD min = 3, max = 3, width = 0 ACPI timer looks GOOD min = 3, max = 3, width = 0 ACPI timer looks GOOD min = 3, max = 3, width = 0 ACPI timer looks GOOD min = 3, max = 3, width = 0 ACPI timer looks GOOD min = 3, max = 3, width = 0 ACPI timer looks GOOD min = 3, max = 3, width = 0 ACPI timer looks GOOD min = 3, max = 3, width = 0 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0 acpi_cpu0: <CPU> on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 ---- initial configuration ------------------------ \\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.2.0 \\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.31.0 \\_SB_.LNKB irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.31.1 \\_SB_.LNKH irq 5: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.31.2 \\_SB_.LNKD irq 12: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.31.3 ---- before setting priority for links ------------ ---- before fixup boot-disabled links ------------- ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- \\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.2.0 \\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.31.0 \\_SB_.LNKB irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.31.1 \\_SB_.LNKH irq 5: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.31.2 \\_SB_.LNKD irq 12: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.31.3 pci0: <ACPI PCI bus> on pcib0 pci0: physical bus=0 found-> vendor=0x8086, dev=0x1130, revid=0x02 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 3, range 32, base f8000000, size 26, enabled map[14]: type 1, range 32, base f7000000, size 19, enabled pcib0: matched entry for 0.2.INTA (src \\_SB_.LNKA) pcib0: slot 2 INTA is routed to irq 11 found-> vendor=0x8086, dev=0x1132, revid=0x02 bus=0, slot=2, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 found-> vendor=0x8086, dev=0x244e, revid=0x01 bus=0, slot=30, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0080, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2440, revid=0x01 bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x010f, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 0000b800, size 4, port disabled found-> vendor=0x8086, dev=0x244b, revid=0x01 bus=0, slot=31, func=1 class=01-01-80, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 0000e800, size 4, enabled pcib0: matched entry for 0.31.INTB (src \\_SB_.LNKB) pcib0: slot 31 INTB is routed to irq 10 found-> vendor=0x8086, dev=0x2443, revid=0x01 bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 pci0: <display, VGA> at device 2.0 (no driver attached) pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xc000-0xdfff pcib1: memory decode 0xf5800000-0xf6ffffff pcib1: prefetched decode 0xf7f00000-0xf7ffffff pcib1: Subtractively decoded bridge. ---- initial configuration ------------------------ \\_SB_.LNKF irq 14: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.9.0 \\_SB_.LNKG irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.9.1 \\_SB_.LNKH irq 5: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.9.2 \\_SB_.LNKE irq 15: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.9.3 \\_SB_.LNKG irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.10.0 \\_SB_.LNKH irq 5: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.10.1 \\_SB_.LNKE irq 15: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.10.2 \\_SB_.LNKF irq 14: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.10.3 \\_SB_.LNKH irq 5: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.11.0 \\_SB_.LNKE irq 15: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.11.1 \\_SB_.LNKF irq 14: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.11.2 \\_SB_.LNKG irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.11.3 \\_SB_.LNKE irq 15: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.12.0 \\_SB_.LNKF irq 14: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.12.1 \\_SB_.LNKG irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.12.2 \\_SB_.LNKH irq 5: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.12.3 \\_SB_.LNKF irq 14: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.13.0 \\_SB_.LNKG irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.13.1 \\_SB_.LNKH irq 5: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.13.2 \\_SB_.LNKE irq 15: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.13.3 \\_SB_.LNKC irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.14.0 \\_SB_.LNKD irq 12: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.14.1 \\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.14.2 \\_SB_.LNKB irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.14.3 \\_SB_.LNKE irq 15: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.8.0 ---- before setting priority for links ------------ \\_SB_.LNKG: interrupts: 3 4 5 6 7 9 10 11 12 14 15 penalty: 1660 1660 1260 1660 1660 660 860 960 1860 11160 11260 references: 5 priority: 0 \\_SB_.LNKC: interrupts: 3 4 5 6 7 9 10 11 12 14 15 penalty: 1660 1660 1260 1660 1660 660 860 960 1860 11160 11260 references: 1 priority: 0 ---- before fixup boot-disabled links ------------- \\_SB_.LNKG: interrupts: 3 4 5 6 7 9 10 11 12 14 15 penalty: 1660 1660 1260 1660 1660 660 860 960 1860 11160 11260 references: 5 priority: 15754 \\_SB_.LNKC: interrupts: 3 4 5 6 7 9 10 11 12 14 15 penalty: 1660 1660 1260 1660 1660 660 860 960 1860 11160 11260 references: 1 priority: 3150 ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- \\_SB_.LNKF irq 14: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.9.0 \\_SB_.LNKG irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.9.1 \\_SB_.LNKH irq 5: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.9.2 \\_SB_.LNKE irq 15: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.9.3 \\_SB_.LNKG irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.10.0 \\_SB_.LNKH irq 5: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.10.1 \\_SB_.LNKE irq 15: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.10.2 \\_SB_.LNKF irq 14: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.10.3 \\_SB_.LNKH irq 5: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.11.0 \\_SB_.LNKE irq 15: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.11.1 \\_SB_.LNKF irq 14: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.11.2 \\_SB_.LNKG irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.11.3 \\_SB_.LNKE irq 15: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.12.0 \\_SB_.LNKF irq 14: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.12.1 \\_SB_.LNKG irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.12.2 \\_SB_.LNKH irq 5: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.12.3 \\_SB_.LNKF irq 14: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.13.0 \\_SB_.LNKG irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.13.1 \\_SB_.LNKH irq 5: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.13.2 \\_SB_.LNKE irq 15: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.13.3 \\_SB_.LNKC irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.14.0 \\_SB_.LNKD irq 12: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.14.1 \\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.14.2 \\_SB_.LNKB irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.14.3 \\_SB_.LNKE irq 15: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.8.0 pci1: <ACPI PCI bus> on pcib1 pci1: physical bus=1 map[10]: type 4, range 32, base 0000d800, size 8, enabled map[14]: type 1, range 32, base f6800000, size 12, enabled pcib1: matched entry for 1.9.INTA (src \\_SB_.LNKF) pcib1: slot 9 INTA is routed to irq 14 found-> vendor=0x1de1, dev=0x0391, revid=0x01 bus=1, slot=9, func=0 class=01-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=14 powerspec 1 supports D0 D3 current D0 map[10]: type 4, range 32, base 0000d400, size 7, enabled map[14]: type 1, range 32, base f6000000, size 7, enabled pcib1: matched entry for 1.11.INTA (src \\_SB_.LNKH) pcib1: slot 11 INTA is routed to irq 5 found-> vendor=0x10b7, dev=0x9200, revid=0x6c bus=1, slot=11, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x0a (2500 ns), maxlat=0x0a (2500 ns) intpin=a, irq=5 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 0000d000, size 7, enabled map[14]: type 1, range 32, base f5800000, size 7, enabled pcib1: matched entry for 1.12.INTA (src \\_SB_.LNKE) pcib1: slot 12 INTA is routed to irq 15 found-> vendor=0x10b7, dev=0x9200, revid=0x6c bus=1, slot=12, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x0a (2500 ns), maxlat=0x0a (2500 ns) intpin=a, irq=15 powerspec 2 supports D0 D1 D2 D3 current D0 trm0: <Tekram DC395U/UW/F DC315/U Fast20 Wide SCSI Adapter> port 0xd800-0xd8ff mem 0xf6800000-0xf6800fff irq 14 at device 9.0 on pci1 pcib1: device trm0 requested decoded I/O range 0xd800-0xd8ff trm0: [GIANT-LOCKED] xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xd400-0xd47f mem 0xf6000000-0xf600007f irq 5 at device 11.0 on pci1 pcib1: device xl0 requested decoded memory range 0xf6000000-0xf600007f xl0: using memory mapped I/O xl0: media options word: a xl0: found MII/AUTO miibus0: <MII bus> on xl0 xlphy0: <3c905C 10/100 internal PHY> on miibus0 xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl0: bpf attached xl0: Ethernet address: 00:50:da:0c:29:68 xl0: [GIANT-LOCKED] xl1: <3Com 3c905C-TX Fast Etherlink XL> port 0xd000-0xd07f mem 0xf5800000-0xf580007f irq 15 at device 12.0 on pci1 pcib1: device xl1 requested decoded memory range 0xf5800000-0xf580007f xl1: using memory mapped I/O xl1: media options word: a xl1: found MII/AUTO miibus1: <MII bus> on xl1 xlphy1: <3c905C 10/100 internal PHY> on miibus1 xlphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl1: bpf attached xl1: Ethernet address: 00:50:da:0c:27:df xl1: [GIANT-LOCKED] isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 pci0: <mass storage, ATA> at device 31.1 (no driver attached) ichsmb0: <Intel 82801BA (ICH2) SMBus controller> port 0xe800-0xe80f irq 10 at device 31.3 on pci0 ichsmb0: [GIANT-LOCKED] smbus0: <System Management Bus> on ichsmb0 smb0: <SMBus generic I/O> on smbus0 unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) sio0: irq maps: 0x1 0x11 0x1 0x1 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A sio1: irq maps: 0x1 0x9 0x1 0x1 sio1 port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A unknown: not probed (disabled) atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0067 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 atkbd0: [GIANT-LOCKED] psm0: unable to allocate IRQ unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) cpu0 on motherboard atkbdc: atkbdc0 already exists; skipping it sio: sio0 already exists; skipping it sio: sio1 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <Option ROMs> at iomem 0xd4000-0xd47ff,0xcc000-0xd3fff,0xc0000-0xcbfff on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) ata0 failed to probe at port 0x1f0 irq 14 on isa0 ata1 failed to probe at port 0x170 irq 15 on isa0 bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0 fe0: not probed (disabled) ie0: not probed (disabled) le0: not probed (disabled) lnc0: not probed (disabled) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) ppc0 failed to probe at irq 7 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. procfs registered Timecounter "TSC" frequency 804025304 Hz quality 800 Timecounters tick every 1.000 msec DUMMYNET initialized (011031) ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to accept, logging unlimited IP Filter: v3.4.31 initialized. Default = pass all, Logging = enabled lo0: bpf attached Waiting 2 seconds for SCSI devices to settle acpi_cpu0: set speed to 100.0% acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0% (probe0:trm0:0:0:0): Retrying Command pass0 at trm0 bus 0 target 0 lun 0 pass0: <QUANTUM ATLAS10K3_36_WLS 020W> Fixed Direct Access SCSI-3 device pass0: Serial Number 344213848938 pass0: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged Queueing Enabled GEOM: new disk da0 da0 at trm0 bus 0 target 0 lun 0 da0: <QUANTUM ATLAS10K3_36_WLS 020W> Fixed Direct Access SCSI-3 device da0: Serial Number 344213848938 da0: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged Queueing Enabled da0: 35074MB (71833096 512 byte sectors: 255H 63S/T 4471C) [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:71826552 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure da0s1, start 32256 length 36775194624 end 36775226879 GEOM: Configure da0s1a, start 0 length 1073741824 end 1073741823 GEOM: Configure da0s1b, start 1073741824 length 2147483648 end 3221225471 GEOM: Configure da0s1c, start 0 length 36775194624 end 36775194623 GEOM: Configure da0s1d, start 3221225472 length 2147483648 end 5368709119 GEOM: Configure da0s1e, start 5368709120 length 31406485504 end 36775194623 Mounting root from ufs:/dev/da0s1a start_init: trying /sbin/initReceived on Wed Mar 24 2004 - 01:15:25 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:48 UTC