Re: Problems with fxp0 and wi0 devices

[ corrected top-posting ]

>
>
>
>
> Matt Emmerton wrote:
>
> >I'm running FreeBSD 5.2.1-RELEASE on a ThinkPad T23 and I can't use
either
> >of the built-in fxp0 or wi0 network adapters.
> >
> >Whenever I try and configure them with dhclient, dhclient just hangs.
> >Whenever I try and configure them manually (static IP and route), packets
> >never go anywhere.
> >Whenever I access fxp0, I get "fxp0: device timeout" messages on my
screen.
> >
> >I looked through cvsweb and didn't see anything that looked useful post
> >5.2.1-REL.
> >
> >Here is the relevant part of dmesg:
> >
> >fxp0: <Intel 82801CAM (ICH3) Pro/100 VE Ethernet> port 0x7000-0x703f mem
> >0xc0200000-0xc0200fff irq 11 at device 8.0 on pci2
> >fxp0: Ethernet address 00:d0:59:33:b2:eb
> >
> >wi0: <Intersil Prims2.5> mem 0xec000000-0xec000fff irq 11 at device 2.0
on
> >pci2
> >wi0: 802.11 address: 00:20:e0:89:4e:0c
> >wi0: using RF:PRIMS2.5 MAC:ISL3874A(Mini-PCI)
> >wi0: Intersil Firmware: Primary (1.0.5), Station (1.3.3)
> >wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
> >
> >And pciconf -l:
> >
> >fxp0_at_pci2:8:0:  class=0x020000 card=0x02091014 chip=0x10318086 rev=0x41
> >hdr=0x00
> >wi0_at_pci2:2:0:  class=0x020000 card=0x40461668 chip=0x30731260 rev=0x01
> >hdr=0x00
> >
> >--
> >Matt Emmerton

> Matt,
>
> Try to add hw.pci.allow_unsupported_io_range=1 to /boot/loader.conf
>
> Regards,
> Rauf

Sorry, no dice.  That did work a long time ago (DP1 timeframe) when some
devices weren't being enabled because things were "invalid".

Thanks for the help,

--
Matt Emmerton