Yes, it used to work perfectly. The dmesg with both cardbus and cbb debuging enabled is included below. Again, it shows insertion of the cardbus card which fails, followed by the pccard card, which succeedes. I also don't remember any 'lazy allocation' with the working builds. Dylan On 8 May 2004 at 17:25, M. Warner Losh wrote: > [[ this may be a duplicate ]] > > In message: <409D614D.7983.2B9BBDF_at_localhost> > "Dylan Wylie" <d.wylie_at_hccnet.nl> writes: > : hm.. > : I'm afraid I only have the one 3com cardbus card. > : well...more than one,but identical ones. > : Other pccard cards work though. > : I could get my hands on some other ones in the coming days. > : Is any-one else seeing this? > : If not, I'll shut-up for now until I get a chance to try other cards. > > It used to work for you, right? if you set hw.cbb.debug=1 and > hw.cardbus.debug=1 what output do you get? > > Warner > #dmesg starts here Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2-CURRENT #3: Sat May 8 23:21:31 CEST 2004 root_at_blankerdieblank:/usr/obj/usr/src/sys/PRESARIO Preloaded elf kernel "/boot/kernel/kernel" at 0xc086c000. Preloaded elf module "/boot/kernel/snd_via82c686.ko" at 0xc086c1f4. Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc086c2a8. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc086c354. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Pentium II/Pentium II Xeon/Celeron (466.06-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x665 Stepping = 5 Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PG E,MCA,CMOV,PAT,PSE36,MMX,FXSR> real memory = 192872448 (183 MB) avail memory = 179036160 (170 MB) Pentium Pro MTRR support enabled random: <entropy source, Software, Yarrow> npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <PTLTD RSDT> on motherboard acpi0: [GIANT-LOCKED] pcibios: BIOS version 2.10 acpi0: Power Button (fixed) Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0 cpu0: <ACPI CPU (3 Cx states)> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 acpi_button0: <Power Button> on acpi0 acpi_acad0: <AC Adapter> on acpi0 acpi_cmbat0: <Control Method Battery> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib0: slot 7 INTD is routed to irq 11 pcib0: slot 7 INTC is routed to irq 9 pcib0: slot 7 INTC is routed to irq 9 pcib0: slot 9 INTA is routed to irq 11 agp0: <VIA Generic host to PCI bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0 agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xf8000000 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pcib1: could not get PCI interrupt routing table for \\_SB_.PCI0.AGP_ - AE_NOT_FOUND pci1: <ACPI PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <VIA 82C686A UDMA66 controller> port 0x1820-0x182f,0x376,0x170- 0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1820 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: at 0x1f0 irq 14 on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: at 0x170 irq 15 on atapci0 uhci0: <VIA 83C572 USB controller> port 0x1800-0x181f irq 11 at device 7.2 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1800 uhci0: [GIANT-LOCKED] usb0: <VIA 83C572 USB controller> on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered isab1: <PCI-ISA bridge> at device 7.4 on pci0 device_probe_and_attach: isab1 attach returned 6 pcm0: <VIA VT82C686A> port 0x1830-0x1833,0x1834-0x1837,0x1000-0x10ff irq 9 at device 7.5 on pci0 pcm0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x1000 pcm0: [GIANT-LOCKED] pcm0: <Analog Devices AD1881 AC97 Codec> pci0: <simple comms> at device 7.6 (no driver attached) pci0: <simple comms> at device 9.0 (no driver attached) cbb0: <TI1211 PCI-CardBus Bridge> at device 10.0 on pci0 cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xf0000000 cbb0: Found memory at f0000000 cbb0: Secondary bus is 0 cbb0: Secondary bus set to 1 subbus 2 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 pcib0: slot 10 INTA is routed to irq 9 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model IntelliMouse, device ID 3 fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0- 0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A ppc0 port 0x378-0x37f irq 7 on acpi0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port acpi_ec0: <Embedded Controller: GPE 0x6> port 0x66,0x62 on acpi0 orm0: <Option ROMs> at iomem 0xdc000-0xdffff,0xc0000-0xcbfff on isa0 pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 466062155 Hz quality 800 Timecounters tick every 10.000 msec ipfw2 initialized, divert disabled, rule-based forwarding enabled, default to deny, logging limited to 10 packets/entry by default Status is 0x30000006 ad0: 11513MB <IBM-DARA-212000> [23392/16/63] at ata0-master UDMA66 acd0: DVDROM <TOSHIBA DVD-ROM SD-C2302> at ata1-master UDMA33 Mounting root from ufs:/dev/ad0s1a Status is 0x30000820 cbb0: card inserted: event=0x00000000, state=30000820 cbb0: cbb_power: 3V cardbus0: Resource not specified in CIS: id=10, size=800000 cardbus0: Resource not specified in CIS: id=14, size=20000 cardbus0: Resource not specified in CIS: id=18, size=800000 cardbus0: <display, VGA> at device 0.0 (no driver attached) cbb0: cbb_power: 0V cbb0: CardBus card activation failed Status is 0x30000086 Status is 0x30000410 cbb0: card inserted: event=0x00000000, state=30000410 cbb_pcic_socket_enable: cbb0: cbb_power: 5V cbb_pcic_socket_enable: cbb0: cbb_power: 0V cbb0: cbb_power: 5V xe0: <Intel EtherExpress(TM) PRO/100 PC Card Mobile Adapter16> at port 0x100- 0x10f irq 9 function 0 config 1 on pccard0 xe0: [GIANT-LOCKED] xe0: Intel EtherExpress(TM) PRO/100 PC Card Mobile Adapter16, version 0x45/0x04, 100Mbps capable xe0: Ethernet address: 00:a0:c9:38:b7:0c Status is 0x30000016 xe0: detached cbb_pcic_socket_disable #dmesg ends hereReceived on Sat May 08 2004 - 23:55:36 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:53 UTC