5.2-current: devfs and pcmcia configuration question

Hello,

I've got problems to setup my notebook that my CF Adapter is readable through
a auto mounted device by any ordinary user.

When the card gets plugged in it is recognized as: 

May 10 13:43:55 Astor kernel: pccard0: Allocation failed for cfe 0
May 10 13:43:55 Astor kernel: ata2: <SunDisk SDP> at port 0xa100-0xa10f irq 11 function 0 config 1 on pccard0
May 10 13:43:55 Astor kernel: ad4: FAILURE - SETFEATURES ENABLE RCACHE status=51<READY,DSC,ERROR> error=4<ABORTED>
May 10 13:43:55 Astor kernel: ad4: FAILURE - SETFEATURES ENABLE WCACHE status=51<READY,DSC,ERROR> error=4<ABORTED>
May 10 13:43:55 Astor kernel: ad4: 30MB <SanDisk SDCFH-32> [488/4/32] at ata2-master PIO4

In dmesg the cardbus adapter shows up as:

[...]
cbb0: <ENE CB1410 PCI-CardBus Bridge> mem 0x90100000-0x90100fff irq 11 at device 4.0 on pci2ed 0x1000 bytes for rid 0x10 type 3 at 0x90100000
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
[...]

Although errors the device can be manually mounted.

Using 5.2. I'm unable to start pccardd due to missing /dev/card0 which
checked for existance in /etc/rc.d/pccard.  Is there a way to have devd/
devfs provide this entry?

TIA -- Peter

-- 
Peter Weiss               / Peter.Weiss_at_germany.sun.com
Sun Microsystems GmbH     / Sonnenallee 1, D-85551 Kirchheim-Heimstetten
(+49 89) 46008 2947       / mobil 0177/ 60 40 121