Greetings, It seems that recent kernel(cvsup'ed on May-12-2004) changes breaks the em driver when the network load is high enough(rsync a directory contains +150MB files). The onboard Intel PRO/1000 just doesn't respond to network request such like ping or dhcp lease renewal -- all interrupt related to em0 was stopped since the "hang" took place. However, the system is still workable(can compile/edit code, only em0 hangs) at this moment. Manually unload/reload the if_em kernel module doesn't solve this problem. Last known good kernel was cvsup'ed on Apr-28-2004, the problem occurred since May-09-2004(cvsup/kernel build on a weekly basis, not sure about whether it worked between Apr-28 and May-09 or not). I'm wondering about whether recent PCI/ACPI changes correlated to this hang since there's no change in /sys/dev/em during last four weeks. The module was built without polling support. ---------------------- vmstat -i ---------------------------- interrupt total rate irq0: clk 93968 99 irq1: atkbd0 4227 4 irq4: cbb0 em0++ 166447 176 irq7: ppc0 1 0 irq8: rtc 120281 127 irq9: acpi0 301 0 irq10: uhci1 200 0 irq11: ath0 uhci2+ 2 0 irq12: psm0 21 0 irq13: npx0 1 0 irq14: ata0 7425 7 irq15: ata1 55 0 Total 392929 417 ------------------------ dmesg ------------------------------ ACPI timer looks GOOD min = 3, max = 3, width = 0 ACPI timer looks GOOD min = 3, max = 3, width = 0 ACPI timer looks GOOD min = 3, max = 3, width = 0 ACPI timer looks GOOD min = 3, max = 3, width = 0 ACPI timer looks GOOD min = 3, max = 3, width = 0 ACPI timer looks GOOD min = 3, max = 3, width = 0 ACPI timer looks GOOD min = 3, max = 3, width = 0 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 atpic: Programming IRQ4 as edge/high acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 cpu0: <ACPI CPU (3 Cx states)> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 ACPI PCI link initial configuration: \\_SB_.LNKA irq 4: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.29.0 \\_SB_.LNKD irq 10: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.29.1 \\_SB_.LNKC irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.29.2 \\_SB_.LNKH irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.29.3 \\_SB_.LNKC irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.31.0 \\_SB_.LNKB irq 6: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.31.1 ACPI PCI link before setting link priority: ACPI PCI link before fixup for boot-disabled links: ACPI PCI link after fixup for boot-disabled links: ACPI PCI link arbitrated configuration: \\_SB_.LNKA irq 4: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.29.0 \\_SB_.LNKD irq 10: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.29.1 \\_SB_.LNKC irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.29.2 \\_SB_.LNKH irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.29.3 \\_SB_.LNKC irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.31.0 \\_SB_.LNKB irq 6: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.31.1 pci0: <ACPI PCI bus> on pcib0 pci0: physical bus=0 map[10]: type 3, range 32, base d0000000, size 28, enabled found-> vendor=0x8086, dev=0x3340, revid=0x03 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x3341, revid=0x03 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords) lattimer=0x60 (2880 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 00001800, size 5, enabled pcib0: matched entry for 0.29.INTA (src \\_SB_.LNKA) pcib0: slot 29 INTA is routed to irq 4 found-> vendor=0x8086, dev=0x24c2, revid=0x01 bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=4 map[20]: type 4, range 32, base 00001820, size 5, enabled pcib0: matched entry for 0.29.INTB (src \\_SB_.LNKD) pcib0: slot 29 INTB is routed to irq 10 found-> vendor=0x8086, dev=0x24c4, revid=0x01 bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 map[20]: type 4, range 32, base 00001840, size 5, enabled pcib0: matched entry for 0.29.INTC (src \\_SB_.LNKC) pcib0: slot 29 INTC is routed to irq 11 found-> vendor=0x8086, dev=0x24c7, revid=0x01 bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=11 map[10]: type 1, range 32, base c0000000, size 10, enabled pcib0: matched entry for 0.29.INTD (src \\_SB_.LNKH) pcib0: slot 29 INTD is routed to irq 11 found-> vendor=0x8086, dev=0x24cd, revid=0x01 bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=11 powerspec 2 supports D0 D3 current D0 found-> vendor=0x8086, dev=0x2448, revid=0x81 bus=0, slot=30, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x8080, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x24cc, revid=0x01 bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 00001860, size 4, enabled found-> vendor=0x8086, dev=0x24ca, revid=0x01 bus=0, slot=31, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 map[20]: type 4, range 32, base 00001880, size 5, enabled pcib0: matched entry for 0.31.INTB (src \\_SB_.LNKB) pcib0: slot 31 INTB is routed to irq 6 found-> vendor=0x8086, dev=0x24c3, revid=0x01 bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=6 map[10]: type 4, range 32, base 00001c00, size 8, enabled map[14]: type 4, range 32, base 000018c0, size 6, enabled map[18]: type 1, range 32, base c0000c00, size 9, enabled map[1c]: type 1, range 32, base c0000800, size 8, enabled pcib0: matched entry for 0.31.INTB (src \\_SB_.LNKB) pcib0: slot 31 INTB is routed to irq 6 found-> vendor=0x8086, dev=0x24c5, revid=0x01 bus=0, slot=31, func=5 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=6 powerspec 2 supports D0 D3 current D0 map[10]: type 4, range 32, base 00002400, size 8, enabled map[14]: type 4, range 32, base 00002000, size 7, enabled pcib0: matched entry for 0.31.INTB (src \\_SB_.LNKB) pcib0: slot 31 INTB is routed to irq 6 found-> vendor=0x8086, dev=0x24c6, revid=0x01 bus=0, slot=31, func=6 class=07-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=6 powerspec 2 supports D0 D3 current D0 agp0: <Intel 82855 host to AGP bridge> mem 0xd0000000-0xdfffffff at device 0.0 on pci0 agp0: Reserved 0x10000000 bytes for rid 0x10 type 3 at 0xd0000000 agp0: allocating GATT for aperture of size 256M pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0x3000-0x3fff pcib1: memory decode 0xc0100000-0xc01fffff pcib1: prefetched decode 0xe0000000-0xe7ffffff ACPI PCI link initial configuration: \\_SB_.LNKA irq 4: [ 3 4 5 6 7 9 10 11] low,level,sharable 1.0.0 \\_SB_.LNKB irq 6: [ 3 4 5 6 7 9 10 11] low,level,sharable 1.0.1 ACPI PCI link before setting link priority: ACPI PCI link before fixup for boot-disabled links: ACPI PCI link after fixup for boot-disabled links: ACPI PCI link arbitrated configuration: \\_SB_.LNKA irq 4: [ 3 4 5 6 7 9 10 11] low,level,sharable 1.0.0 \\_SB_.LNKB irq 6: [ 3 4 5 6 7 9 10 11] low,level,sharable 1.0.1 pci1: <ACPI PCI bus> on pcib1 pci1: physical bus=1 map[10]: type 3, range 32, base e0000000, size 27, enabled pcib1: device (null) requested decoded memory range 0xe0000000-0xe7ffffff map[14]: type 4, range 32, base 00003000, size 8, enabled pcib1: device (null) requested decoded I/O range 0x3000-0x30ff map[18]: type 1, range 32, base c0100000, size 16, enabled pcib1: device (null) requested decoded memory range 0xc0100000-0xc010ffff pcib1: matched entry for 1.0.INTA (src \\_SB_.LNKA) pcib1: slot 0 INTA is routed to irq 4 found-> vendor=0x1002, dev=0x4c66, revid=0x02 bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0387, statreg=0x02b0, cachelnsz=8 (dwords) lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=4 powerspec 2 supports D0 D1 D2 D3 current D0 drm0: <ATI Radeon Lf R250 Mobility 9000 M9> port 0x3000-0x30ff mem 0xc0100000-0xc010ffff,0xe0000000-0xe7ffffff irq 4 at device 0.0 on pci1 info: [drm] AGP at 0xd0000000 256MB info: [drm] Initialized radeon 1.10.0 20020828 on minor 0 uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0x1800-0x181f irq 4 at device 29.0 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1800 uhci0: [GIANT-LOCKED] usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0x1820-0x183f irq 10 at device 29.1 on pci0 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1820 uhci1: [GIANT-LOCKED] usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered ums0: IBM Corporation product 0x3107, rev 1.10/5.00, addr 2, iclass 3/1 ums0: 3 buttons and Z dir. uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0x1840-0x185f irq 11 at device 29.2 on pci0 uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1840 uhci2: [GIANT-LOCKED] usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xc0000000-0xc00003ff irq 11 at device 29.7 on pci0 ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xc0000000 ehci0: (New EHCI DeviceId=0x24cd8086) ehci0: [GIANT-LOCKED] ehci_pci_attach: companion usb0 ehci_pci_attach: companion usb1 ehci_pci_attach: companion usb2 usb3: EHCI version 1.0 usb3: companion controllers, 2 ports each: usb0 usb1 usb2 usb3: <EHCI (generic) USB 2.0 controller> on ehci0 usb3: USB revision 2.0 uhub3: (0x8086) EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub3: 6 ports with 6 removable, self powered pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pcib2: secondary bus 2 pcib2: subordinate bus 8 pcib2: I/O decode 0x4000-0x8fff pcib2: memory decode 0xc0200000-0xcfffffff pcib2: prefetched decode 0xe8000000-0xefffffff pcib2: Subtractively decoded bridge. ACPI PCI link initial configuration: \\_SB_.LNKA irq 4: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.0.0 \\_SB_.LNKB irq 6: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.0.1 \\_SB_.LNKC irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.0.2 \\_SB_.LNKA irq 4: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.1.0 \\_SB_.LNKC irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.2.0 \\_SB_.LNKD irq 10: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.2.1 \\_SB_.LNKA irq 4: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.2.2 \\_SB_.LNKB irq 6: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.2.3 \\_SB_.LNKC irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.4.0 \\_SB_.LNKD irq 10: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.4.1 \\_SB_.LNKA irq 4: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.4.2 \\_SB_.LNKB irq 6: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.4.3 \\_SB_.LNKE irq 0: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.8.0 ACPI PCI link before setting link priority: \\_SB_.LNKE: interrupts: 3 4 5 6 7 9 10 11 penalty: 1110 1710 110 1610 1110 110 410 710 references: 1 priority: 0 ACPI PCI link before fixup for boot-disabled links: \\_SB_.LNKE: interrupts: 3 4 5 6 7 9 10 11 penalty: 1110 1710 110 1610 1110 110 410 710 references: 1 priority: 860 ACPI PCI link after fixup for boot-disabled links: ACPI PCI link arbitrated configuration: \\_SB_.LNKA irq 4: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.0.0 \\_SB_.LNKB irq 6: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.0.1 \\_SB_.LNKC irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.0.2 \\_SB_.LNKA irq 4: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.1.0 \\_SB_.LNKC irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.2.0 \\_SB_.LNKD irq 10: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.2.1 \\_SB_.LNKA irq 4: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.2.2 \\_SB_.LNKB irq 6: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.2.3 \\_SB_.LNKC irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.4.0 \\_SB_.LNKD irq 10: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.4.1 \\_SB_.LNKA irq 4: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.4.2 \\_SB_.LNKB irq 6: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.4.3 \\_SB_.LNKE irq 9: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.8.0 pci2: <ACPI PCI bus> on pcib2 pci2: physical bus=2 map[10]: type 1, range 32, base b0000000, size 12, enabled pcib2: device (null) requested decoded memory range 0xb0000000-0xb0000fff pcib2: matched entry for 2.0.INTA (src \\_SB_.LNKA) pcib2: slot 0 INTA is routed to irq 4 found-> vendor=0x104c, dev=0xac55, revid=0x01 bus=2, slot=0, func=0 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0107, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0xc0 (48000 ns), maxlat=0x03 (750 ns) intpin=a, irq=4 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base b1000000, size 12, enabled pcib2: device (null) requested decoded memory range 0xb1000000-0xb1000fff pcib2: matched entry for 2.0.INTB (src \\_SB_.LNKB) pcib2: slot 0 INTB is routed to irq 6 found-> vendor=0x104c, dev=0xac55, revid=0x01 bus=2, slot=0, func=1 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0107, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0xc0 (48000 ns), maxlat=0x03 (750 ns) intpin=b, irq=6 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base c0220000, size 17, enabled pcib2: device (null) requested decoded memory range 0xc0220000-0xc023ffff map[14]: type 1, range 32, base c0200000, size 16, enabled pcib2: device (null) requested decoded memory range 0xc0200000-0xc020ffff map[18]: type 4, range 32, base 00008000, size 6, enabled pcib2: device (null) requested decoded I/O range 0x8000-0x803f pcib2: matched entry for 2.1.INTA (src \\_SB_.LNKA) pcib2: slot 1 INTA is routed to irq 4 found-> vendor=0x8086, dev=0x101e, revid=0x03 bus=2, slot=1, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x0230, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns) intpin=a, irq=4 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type 1, range 32, base c0210000, size 16, enabled pcib2: device (null) requested decoded memory range 0xc0210000-0xc021ffff pcib2: matched entry for 2.2.INTA (src \\_SB_.LNKC) pcib2: slot 2 INTA is routed to irq 11 found-> vendor=0x168c, dev=0x1014, revid=0x01 bus=2, slot=2, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0116, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x50 (2400 ns), mingnt=0x0a (2500 ns), maxlat=0x1c (7000 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 cbb0: <TI1520 PCI-CardBus Bridge> mem 0xb0000000-0xb0000fff irq 4 at device 0.0 on pci2 cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xb0000000 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb0: [MPSAFE] cbb0: PCI Configuration space: 0x00: 0xac55104c 0x02100107 0x06070001 0x00824008 0x10: 0xb0000000 0x020000a0 0xb0050302 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x07400104 0x40: 0x05121014 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x0844d071 0x00000000 0x00000000 0x01d21022 0x90: 0x406422c0 0x00000000 0x00000000 0x00000000 0xa0: 0xfe120001 0x00c00000 0x00000000 0x0000000f 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 cbb1: <TI1520 PCI-CardBus Bridge> mem 0xb1000000-0xb1000fff irq 6 at device 0.1 on pci2 cbb1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xb1000000 cardbus1: <CardBus bus> on cbb1 pccard1: <16-bit PCCard bus> on cbb1 cbb1: [MPSAFE] cbb1: PCI Configuration space: 0x00: 0xac55104c 0x02100107 0x06070001 0x00824008 0x10: 0xb1000000 0x020000a0 0xb0080602 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x07400206 0x40: 0x05121014 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x0844d071 0x00000000 0x00000000 0x01d21022 0x90: 0x406422c0 0x00000000 0x00000000 0x00000000 0xa0: 0xfe120001 0x00c00000 0x00000000 0x0000000f 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.25> port 0x8000-0x803f mem 0xc0200000-0xc020ffff,0xc0220000-0xc023ffff irq 4 at device 1.0 on pci2 em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xc0220000 em0: Reserved 0x40 bytes for rid 0x18 type 4 at 0x8000 em0: [GIANT-LOCKED] em0: bpf attached em0: Ethernet address: 00:0d:60:76:52:1e em0: Speed:N/A Duplex:N/A ath0: <Atheros 5212> mem 0xc0210000-0xc021ffff irq 11 at device 2.0 on pci2 ath0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xc0210000 ath0: [GIANT-LOCKED] ath0: mac 5.6 phy 4.1 5ghz radio 1.7 2ghz radio 2.3 ath0: bpf attached ath0: Ethernet address: 00:05:5e:50:fc:22 ath0: bpf attached ath0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps ath0: bpf attached isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH4 UDMA100 controller> port 0x1860-0x186f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1860 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 mask=03 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=50 ostat1=00 ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb ata1-slave: stat=0x00 err=0x01 lsb=0x14 msb=0xeb ata1: reset tp2 mask=03 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER> ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) pcm0: <Intel ICH4 (82801DB)> port 0x18c0-0x18ff,0x1c00-0x1cff mem 0xc0000800-0xc00008ff,0xc0000c00-0xc0000dff irq 6 at device 31.5 on pci0 pcm0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x1c00 pcm0: Reserved 0x40 bytes for rid 0x14 type 4 at 0x18c0 pcm0: [GIANT-LOCKED] pcm0: <Analog Devices AD1981B AC97 Codec (id = 0x41445374)> pcm0: Codec features headphone, 20 bit DAC, 5 bit master volume, no 3D Stereo Enhancement pcm0: Primary codec extended features variable rate PCM, AMAP, reserved 4 pcm0: sndbuf_setmap 268000, 4000; 0xdddef000 -> 268000 pcm0: sndbuf_setmap 284000, 4000; 0xdddf3000 -> 284000 pci0: <simple comms> at device 31.6 (no driver attached) unknown: not probed (disabled) atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x54ab (2) kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 atkbd0: [GIANT-LOCKED] psm0: unable to allocate IRQ psmcpnp0 irq 12 on acpi0 psm0: current command byte:0047 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000000, packet size:3 psm0: syncmask:c0, syncbits:00 unknown: not probed (disabled) sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: irq maps: 0xa01 0xa01 0xa01 0xa01 sio0: probe failed test(s): 0 1 2 4 6 7 9 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 8250 or not responding unknown: not probed (disabled) ppc0: using extended I/O port range PC873xx probe at 0x2e got unknown ID 0x0 ppc0: ECP SPP ECP+EPP SPP ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 1 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: <Parallel port bus> on ppc0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port plip0: <PLIP network interface> on ppbus0 plip0: bpf attached sio1: irq maps: 0xa01 0xa09 0xa01 0xa01 sio1 port 0x2f8-0x2ff irq 3 drq 3 on acpi0 sio1: type 16550A acpi_ec0: Changing GLK from 1 to 0 unknown: not probed (disabled) acpi_cmbat0: <Control Method Battery> on acpi0 unknown: not probed (disabled) acpi_acad0: <AC Adapter> on acpi0 unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it ppc: ppc0 already exists; skipping it sio: sio0 already exists; skipping it sio: sio1 already exists; skipping it sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <Option ROMs> at iomem 0xe0000-0xeffff,0xdc000-0xdffff,0xd1000-0xd1fff,0xd0000-0xd0fff,0xc0000-0xcffff on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0 fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k vga0: vga: WARNING: video mode switching is not fully supported on this adapter VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 64 4f 4f 88 59 9e 9a 1f 00 4f 0d 0e 00 00 07 80 92 83 8f 28 1f 8f 9b a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 00 00 03 00 02 67 64 4f 4f 88 59 9e 9a 1f 00 4f 0d 0e 00 00 07 80 92 83 8f 28 1f 8f 9b a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. Timecounter "TSC" frequency 1395467339 Hz quality 800 Timecounters tick every 10.000 msec Linux ELF exec handler installed lo0: bpf attached ata1: spurious interrupt - status=0x00 error=0x01 cpu0: set speed to 100.0% acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0% acpi_cmbat0: battery initialization start acpi_acad0: acline initialization start acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin ata0-master: setting PIO4 on Intel ICH4 chip ata0-master: setting UDMA100 on Intel ICH4 chip ad0: <IC25N040ATCS05-0/CS4OA61A> ATA-5 disk at ata0-master ad0: 35174MB (72037362 sectors), 71465 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA100 GEOM: new disk ad0 [0] f:00 typ:15 s(CHS):1023/0/1 e(CHS):1023/194/63 s:36106560 l:35925120 [1] f:00 typ:11 s(CHS):0/1/1 e(CHS):911/239/63 s:63 l:13789377 [2] f:00 typ:131 s(CHS):1023/255/63 e(CHS):1023/134/63 s:30875040 l:5231520 [3] f:80 typ:165 s(CHS):912/0/1 e(CHS):1023/224/63 s:13789440 l:17085600 GEOM: Configure ad0s1, start 18486558720 length 18393661440 end 36880220159 GEOM: Configure ad0s2, start 32256 length 7060161024 end 7060193279 GEOM: Configure ad0s3, start 15808020480 length 2678538240 end 18486558719 GEOM: Configure ad0s4, start 7060193280 length 8747827200 end 15808020479 MBREXT Slice 5 on ad0s1: [0] f:00 typ:11 s(CHS):1023/1/1 e(CHS):1023/239/63 s:63 l:35925057 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad0s5, start 32256 length 18393629184 end 18393661439 GEOM: Configure ad0s4a, start 0 length 268435456 end 268435455 GEOM: Configure ad0s4b, start 268435456 length 536870912 end 805306367 GEOM: Configure ad0s4c, start 0 length 8747827200 end 8747827199 GEOM: Configure ad0s4d, start 805306368 length 33554432 end 838860799 GEOM: Configure ad0s4e, start 838860800 length 1610612736 end 2449473535 GEOM: Configure ad0s4f, start 2449473536 length 6298353664 end 8747827199 ums0: at uhub1 port 2 (addr 2) disconnected ums0: detached (probe0:ata0:0:0:0): error 22 (probe0:ata0:0:0:0): Unretryable Error (probe1:ata0:0:1:0): error 22 (probe1:ata0:0:1:0): Unretryable Error ums0: IBM Corporation product 0x3107, rev 1.10/5.00, addr 2, iclass 3/1 ums0: 3 buttons and Z dir. ata1-slave: FAILURE - ATAPI_IDENTIFY no interrupt ata1-slave: FAILURE - ATAPI_IDENTIFY no interrupt ata1-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin ata1-master: setting PIO4 on Intel ICH4 chip acd0: <UJDA745 DVD/CDRW/1.02> CDRW drive at ata1 as master acd0: read 4134KB/s (4134KB/s) write 2755KB/s (2755KB/s), 2048KB buffer, PIO4 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet acd0: Writes: CDR, CDRW, test write, burnproof acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc pcm0: measured ac97 link rate at 48003 Hz, will use 48000 Hz (probe1:ata1:0:1:0): error 22 (probe1:ata1:0:1:0): Unretryable Error (probe2:ata0:0:0:0): error 22 (probe2:ata0:0:0:0): Unretryable Error (probe3:ata0:0:1:0): error 22 (probe3:ata0:0:1:0): Unretryable Error (probe1:ata1:0:1:0): error 22 (probe1:ata1:0:1:0): Unretryable Error (probe0:ata1:0:0:0): error 22 (probe0:ata1:0:0:0): Unretryable Error (probe0:ata1:0:0:0): error 6 (probe0:ata1:0:0:0): Unretryable Error (probe0:ata1:0:0:0): error 22 (probe0:ata1:0:0:0): Unretryable Error pass0 at ata1 bus 0 target 0 lun 0 pass0: <MATSHITA UJDA745 DVD/CDRW 1.02> Removable CD-ROM SCSI-0 device pass0: 16.000MB/s transfers pass0 at ata1 bus 0 target 0 lun 0 pass0: <MATSHITA UJDA745 DVD/CDRW 1.02> Removable CD-ROM SCSI-0 device pass0: 16.000MB/s transfers Mounting root from ufs:/dev/ad0s4a start_init: trying /sbin/init procfs registered linprocfs registered em0: Link is up 100 Mbps Full Duplex agp0: Setting AGP v2 mode 1 info: [drm] Loading R200 Microcode drm0: [MPSAFE] acpi_cmbat0: battery initialization failed, giving up acpi_ec0: info: new max delay is 25 us acpi_ec0: info: new max delay is 30 us acpi_ec0: info: new max delay is 50 us ichwd module loaded ichwd_identify() ichwd_identify(): found ICH chipset: Intel 82801DBM watchdog timer ichwd0: <Intel 82801DBM watchdog timer> on motherboard ichwd0: attaching ichwd0: unable to reserve SMI registers device_probe_and_attach: ichwd0 attach returned 6Received on Wed May 12 2004 - 01:57:45 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:53 UTC