> Date: Mon, 17 May 2004 12:38:55 -0500 > From: Edwin Culp <eculp_at_encontacto.net> > Sender: owner-freebsd-current_at_freebsd.org > > I'm running current as of yesterday. I connected an older > current disk [probably 6 months] that has some important > information. I thought that it would be trivial to mount it and > copy the info to my current disk. I tried and am getting: > > ad2: 29311MB <Maxtor 53073U6> [59554/16/63] at ata1-master UDMA66 > ad2: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=0 > ad2: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=0 > ad2: FAILURE - READ_DMA status=51<READY,DSC,ERROR> > error=84<ICRC,ABORTED> LBA=0 > ad2: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=0 > ad2: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=0 > ad2: FAILURE - READ_DMA status=51<READY,DSC,ERROR> > error=84<ICRC,ABORTED> LBA=0 > > Could this be caused by changes in current, a configuration issue > that I'm missing or is it a probable hardware failure? Probably not a useful suggestion, but is the disk jumpered as MASTER? 'ad2' is normally the master of the second IDE bus. -- R. Kevin Oberman, Network Engineer Energy Sciences Network (ESnet) Ernest O. Lawrence Berkeley National Laboratory (Berkeley Lab) E-mail: oberman_at_es.net Phone: +1 510 486-8634Received on Mon May 17 2004 - 08:46:23 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:54 UTC