Re: FAILURE - READ_DMA status=51<READY,DSC,ERROR>error=84<ICRC,ABORTED> LBA=0

I recommend that you use smartmontools from the ports and make a long 
self test on drive. If it is failing, it should detect it...


jesse marquez wrote:

> You might want to reseat the cabling on the hard drive, make sure pins are
> okay as well. Looks like the drive is dying though.
> 
> over and out,
> .jesse
> ----- Original Message ----- 
> From: "Edwin Culp" <eculp_at_encontacto.net>
> To: <current_at_freebsd.org>
> Sent: Monday, May 17, 2004 12:38 PM
> Subject: ad2: FAILURE - READ_DMA
> status=51<READY,DSC,ERROR>error=84<ICRC,ABORTED> LBA=0
> 
> 
> 
>>I'm running current as of yesterday.  I connected an older
>>current disk [probably 6 months] that has some important
>>information.  I thought that it would be trivial to mount it and
>>copy the info to my current disk.  I tried and am getting:
>>
>>ad2: 29311MB <Maxtor 53073U6> [59554/16/63] at ata1-master UDMA66
>>ad2: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=0
>>ad2: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=0
>>ad2: FAILURE - READ_DMA status=51<READY,DSC,ERROR>
>>error=84<ICRC,ABORTED> LBA=0
>>ad2: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=0
>>ad2: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=0
>>ad2: FAILURE - READ_DMA status=51<READY,DSC,ERROR>
>>error=84<ICRC,ABORTED> LBA=0
>>
>>Could this be caused by changes in current, a configuration issue
>>that I'm missing or is it a probable hardware failure?
>>
>>Thanks for any suggestions,
>>
>>ed
>>_______________________________________________
>>freebsd-current_at_freebsd.org mailing list
>>http://lists.freebsd.org/mailman/listinfo/freebsd-current
>>To unsubscribe, send any mail to "freebsd-current-unsubscribe_at_freebsd.org"
> 
> 
> _______________________________________________
> freebsd-current_at_freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-current
> To unsubscribe, send any mail to "freebsd-current-unsubscribe_at_freebsd.org"