Re: cannot upgrade from 5.2.1 to -current (-current kernel fails to boot)

From: Jonathan Stewart <jonstew1983_at_yahoo.com>
Date: Thu, 20 May 2004 08:58:51 -0700 (PDT)
--- Xin LI <delphij_at_frontfree.net> wrote:
> On Mon, May 17, 2004 at 04:38:36PM -0700, Jonathan Stewart wrote:
> > Note: If this is a poor email please let me know how to improve it.
> 
> For this type of issue, it would be better if you can provide more
> detailed information. For example, a boot -v output from "known good"
> configuration. In addition, some instruction to trigger the problem
> you encounter would be good, as if we can reproduce your issue, we
> are more likely to solve it.
> 

Sorry, I forgot to re-attach the files when I mailed from this account.
 They should go through this time.  "boot-v.txt" is from 5.2.1 Release,
"boot-v fail end.txt" is copied from the end of a failing -current
kernel, and "uname-a.txt" is from uname-a on the 5.2.1 kernel.  I
installed 5.2.1 release from aburned CD installed cvsup and did a make
buildworld, make buildkernel,make install kernel then rebooted.  The
boot process appears to hang right before mounting / although the
keyboard num lock and scroll lock keys work and I can scroll the the
boot message history.  I can still boot by loading the 5.2.1 kernel
manually at the boot prompt.  I do get "unretryable errors" right
before it hangs I have copied them by hand into the boot -v fail end
attachment.

> > I am still fairly new to FreeBSD (I suppose I could be considered a
> > "newbie") but I have some basic programming and scripting
> background
> > from Windows and web page projects, kernel stuff is way beyond me
> right
> > now.  I am willing to try anything I need to as this system is just
> > being used for experimentation.  I have attached a boot -v and name
> -a
> > from 5.2.1 release and would post a boot -v from current but I
> don't
> > know how.  My motherboard is an Asus A7N8X Deluxe 2.0 with 1GB of
> RAM.
> 
> I did not saw your attachment :-( What do you mean by "can not boot"?
> If the system stops to respond during startup, you may want to post
> the last lines it tells you when you have "boot -v". Additionally,
> remember that kernel output during boot is stroed in
> /var/run/dmesg.boot
> so it will be easy to attach that file, when possible.
> 

See above about attachments, and "hang" symptoms.  I don't have a
serial console available so I cannot get the failing boot -v that way
but I will retype as much as I need to, I could use the practice
anyway.

> > I am still dual booting with Windows :( and have a shared partition
> > (FAT32) I can dump data onto.  (I don't have email setup on Free
> BSD
> > yet
> > although if that would help at some point I'll figure it out)
> 
> You will find Handbook useful. Additionally, if you did not installed
> a X Window system, you can access the web through some console based
> web browsers, for example, links.
> 

I have links installed and since I have to use my Yahoo! account to
post anyway that should work fine.

[snipped off topic material]

> Cheers,
> -- 
> Xin LI <delphij frontfree net>	http://www.delphij.net/
> See complete headers for GPG key and other information.
> 

Thanks,
Jonathan



	
		
__________________________________
Do you Yahoo!?
Yahoo! Domains – Claim yours for only $14.70/year
http://smallbusiness.promotions.yahoo.com/offer 
.....
acd1: Medium: no/blank disc
(probe0:umass-sim0:0:0:0): error 22
(probe0:umass-sim0:0:0:0): Unretryable Error
(probe8:sbp1:0:0:0): error 22
(probe8:sbp1:0:0:0): Unretryable Error
(probe9:sbp1:0:1:0): error 22
(probe9:sbp1:0:1:0): Unretryable Error
(probe10:sbp1:0:2:0): error 22
(probe10:sbp1:0:2:0): Unretryable Error
(probe11:sbp1:0:3:0): error 22
(probe11:sbp1:0:3:0): Unretryable Error
(probe12:sbp1:0:4:0): error 22
(probe12:sbp1:0:4:0): Unretryable Error
(probe13:sbp1:0:5:0): error 22
(probe13:sbp1:0:5:0): Unretryable Error
(probe14:sbp1:0:6:0): error 22
(probe14:sbp1:0:6:0): Unretryable Error

=0x10de, dev=0x01ed, revid=0xc1
	bus=0, slot=0, func=3
	class=05-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x10de, dev=0x01ec, revid=0xc1
	bus=0, slot=0, func=4
	class=05-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x10de, dev=0x01ef, revid=0xc1
	bus=0, slot=0, func=5
	class=05-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x10de, dev=0x0060, revid=0xa4
	bus=0, slot=1, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x000f, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	map[10]: type 4, range 32, base 0000dc00, size  5, enabled
found->	vendor=0x10de, dev=0x0064, revid=0xa2
	bus=0, slot=1, func=1
	class=0c-05-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0001, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
	intpin=a, irq=255
	powerspec 2  supports D0 D3  current D0
	map[10]: type 1, range 32, base e3087000, size 12, enabled
pci_cfgintr: can't route an interrupt to 0:2 INTA
found->	vendor=0x10de, dev=0x0067, revid=0xa4
	bus=0, slot=2, func=0
	class=0c-03-10, hdrtype=0x00, mfdev=1
	cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base e3082000, size 12, enabled
found->	vendor=0x10de, dev=0x0067, revid=0xa4
	bus=0, slot=2, func=1
	class=0c-03-10, hdrtype=0x00, mfdev=1
	cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
	intpin=b, irq=255
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base e3083000, size  8, enabled
pci_cfgintr: can't route an interrupt to 0:2 INTC
found->	vendor=0x10de, dev=0x0068, revid=0xa4
	bus=0, slot=2, func=2
	class=0c-03-20, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
	intpin=c, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base e3086000, size 12, enabled
	map[14]: type 4, range 32, base 0000e000, size  3, enabled
pci_cfgintr: can't route an interrupt to 0:4 INTA
found->	vendor=0x10de, dev=0x0066, revid=0xa1
	bus=0, slot=4, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x01 (250 ns), maxlat=0x14 (5000 ns)
	intpin=a, irq=5
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base e3000000, size 19, enabled
pci_cfgintr: can't route an interrupt to 0:5 INTA
found->	vendor=0x10de, dev=0x006b, revid=0xa2
	bus=0, slot=5, func=0
	class=04-01-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x01 (250 ns), maxlat=0x0c (3000 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 4, range 32, base 0000e400, size  8, enabled
	map[14]: type 4, range 32, base 0000d000, size  7, enabled
	map[18]: type 1, range 32, base e3080000, size 12, enabled
pci_cfgintr: can't route an interrupt to 0:6 INTA
found->	vendor=0x10de, dev=0x006a, revid=0xa1
	bus=0, slot=6, func=0
	class=04-01-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x05 (1250 ns)
	intpin=a, irq=5
	powerspec 2  supports D0 D1 D2 D3  current D0
found->	vendor=0x10de, dev=0x006c, revid=0xa3
	bus=0, slot=8, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
	map[20]: type 4, range 32, base 0000f000, size  4, enabled
found->	vendor=0x10de, dev=0x0065, revid=0xa2
	bus=0, slot=9, func=0
	class=01-01-8a, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
	powerspec 2  supports D0 D3  current D0
found->	vendor=0x10de, dev=0x006d, revid=0xa3
	bus=0, slot=12, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
	map[10]: type 1, range 32, base e3084000, size 11, enabled
	map[14]: type 1, range 32, base e3085000, size  6, enabled
pci_cfgintr: can't route an interrupt to 0:13 INTA
found->	vendor=0x10de, dev=0x006e, revid=0xa3
	bus=0, slot=13, func=0
	class=0c-00-10, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
	intpin=a, irq=5
	powerspec 2  supports D0 D1 D2 D3  current D0
found->	vendor=0x10de, dev=0x01e8, revid=0xc1
	bus=0, slot=30, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x0220, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x0a (2500 ns), maxlat=0x00 (0 ns)
agp0: <NVIDIA nForce2 AGP Controller> mem 0xd8000000-0xdbffffff at device 0.0 on pci0
agp0: allocating GATT for aperture of size 64M
pci0: <memory, RAM> at device 0.1 (no driver attached)
pci0: <memory, RAM> at device 0.2 (no driver attached)
pci0: <memory, RAM> at device 0.3 (no driver attached)
pci0: <memory, RAM> at device 0.4 (no driver attached)
pci0: <memory, RAM> at device 0.5 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xe3087000-0xe3087fff irq 11 at device 2.0 on pci0
ohci0: (New OHCI DeviceId=0x006710de)
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x10de) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
uhub1: Texas Instruments TUSB2046 hub, class 9/0, rev 1.10/1.25, addr 2
uhub1: 4 ports with 4 removable, bus powered
ugen0: Texas Instruments Incorporated TI-GRAPH LINK USB, rev 1.10/1.03, addr 3
ugen1: X10 Wireless Technology Inc product 0x0004, rev 1.10/1.00, addr 4
ohci1: <OHCI (generic) USB controller> mem 0xe3082000-0xe3082fff at device 2.1 on pci0
pci_cfgintr: can't route an interrupt to 0:2 INTB
ohci1: Could not allocate irq
device_probe_and_attach: ohci1 attach returned 6
pci0: <serial bus, USB> at device 2.2 (no driver attached)
pci0: <network, ethernet> at device 4.0 (no driver attached)
pci0: <multimedia, audio> at device 5.0 (no driver attached)
pci0: <multimedia, audio> at device 6.0 (no driver attached)
pcib1: <PCIBIOS PCI-PCI bridge> at device 8.0 on pci0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0x9000-0xafff
pcib1:   memory decode     0xe1000000-0xe2ffffff
pcib1:   prefetched decode 0xfff00000-0xfffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
	map[10]: type 4, range 32, base 00009000, size  5, enabled
pci_cfgintr_valid: BIOS irq 11 is valid
pci_cfgintr: 1:9 INTA BIOS irq 11
found->	vendor=0x1102, dev=0x0002, revid=0x07
	bus=1, slot=9, func=0
	class=04-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x14 (5000 ns)
	intpin=a, irq=11
	powerspec 1  supports D0 D1 D2 D3  current D0
	map[10]: type 4, range 32, base 00009400, size  3, enabled
found->	vendor=0x1102, dev=0x7002, revid=0x07
	bus=1, slot=9, func=1
	class=09-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	powerspec 1  supports D0 D1 D2 D3  current D0
	map[10]: type 4, range 32, base 00009800, size  3, enabled
	map[14]: type 4, range 32, base 00009c00, size  2, enabled
	map[18]: type 4, range 32, base 0000a000, size  3, enabled
	map[1c]: type 4, range 32, base 0000a400, size  2, enabled
	map[20]: type 4, range 32, base 0000a800, size  4, enabled
	map[24]: type 1, range 32, base e2000000, size  9, enabled
pci_cfgintr_valid: BIOS irq 11 is valid
pci_cfgintr: 1:11 INTA BIOS irq 11
found->	vendor=0x1095, dev=0x3112, revid=0x02
	bus=1, slot=11, func=0
	class=01-04-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x02b0, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
pci1: <multimedia, audio> at device 9.0 (no driver attached)
pci1: <input device> at device 9.1 (no driver attached)
atapci0: <SiI 3112 SATA150 controller> port 0xa800-0xa80f,0xa400-0xa403,0xa000-0xa007,0x9c00-0x9c03,0x9800-0x9807 mem 0xe2000000-0xe20001ff irq 11 at device 11.0 on pci1
pcib1: device atapci0 requested decoded I/O range 0xa800-0xa80f
atapci0: [MPSAFE]
pcib1: device atapci0 requested decoded memory range 0xe2000000-0xe20001ff
ata2: reset tp1 mask=01 ostat0=7f ostat1=00
ata2-master: stat=0xff err=0x00 lsb=0x00 msb=0x00
ata2-master: stat=0xff err=0x00 lsb=0x00 msb=0x00
ata2-master: stat=0xff err=0x00 lsb=0x00 msb=0x00
ata2-master: stat=0xff err=0x00 lsb=0x00 msb=0x00
ata2-master: stat=0xff err=0x00 lsb=0x00 msb=0x00
ata2-master: stat=0xff err=0x00 lsb=0x00 msb=0x00
ata2-master: stat=0xff err=0x00 lsb=0x00 msb=0x00
ata2-master: stat=0xff err=0x00 lsb=0x00 msb=0x00
ata2-master: stat=0xff err=0x00 lsb=0x00 msb=0x00
ata2-master: stat=0xff err=0x00 lsb=0x00 msb=0x00
ata2-master: stat=0xff err=0x00 lsb=0x00 msb=0x00
ata2-master: stat=0xff err=0x00 lsb=0x00 msb=0x00
ata2-master: stat=0xff err=0x00 lsb=0x00 msb=0x00
ata2-master: stat=0xff err=0x00 lsb=0x00 msb=0x00
ata2-master: stat=0xff err=0x00 lsb=0x00 msb=0x00
ata2-master: stat=0xff err=0x00 lsb=0x00 msb=0x00
ata2-master: stat=0xff err=0x00 lsb=0x00 msb=0x00
ata2-master: stat=0xff err=0x00 lsb=0x00 msb=0x00
ata2-master: stat=0xff err=0x00 lsb=0x00 msb=0x00
ata2-master: stat=0xff err=0x00 lsb=0x00 msb=0x00
ata2-master: stat=0xff err=0x00 lsb=0x00 msb=0x00
ata2-master: stat=0xff err=0x00 lsb=0x00 msb=0x00
ata2: reset tp2 mask=00 stat0=ff stat1=00 devices=0x0
ata2: at 0xe2000000 on atapci0
ata2: [MPSAFE]
ata3: reset tp1 mask=01 ostat0=7f ostat1=00
ata3-master: stat=0xff err=0x00 lsb=0x00 msb=0x00
ata3-master: stat=0xff err=0x00 lsb=0x00 msb=0x00
ata3-master: stat=0xff err=0x00 lsb=0x00 msb=0x00
ata3-master: stat=0xff err=0x00 lsb=0x00 msb=0x00
ata3-master: stat=0xff err=0x00 lsb=0x00 msb=0x00
ata3-master: stat=0xff err=0x00 lsb=0x00 msb=0x00
ata3-master: stat=0xff err=0x00 lsb=0x00 msb=0x00
ata3-master: stat=0xff err=0x00 lsb=0x00 msb=0x00
ata3-master: stat=0xff err=0x00 lsb=0x00 msb=0x00
ata3-master: stat=0xff err=0x00 lsb=0x00 msb=0x00
ata3-master: stat=0xff err=0x00 lsb=0x00 msb=0x00
ata3-master: stat=0xff err=0x00 lsb=0x00 msb=0x00
ata3-master: stat=0xff err=0x00 lsb=0x00 msb=0x00
ata3-master: stat=0xff err=0x00 lsb=0x00 msb=0x00
ata3-master: stat=0xff err=0x00 lsb=0x00 msb=0x00
ata3-master: stat=0xff err=0x00 lsb=0x00 msb=0x00
ata3-master: stat=0xff err=0x00 lsb=0x00 msb=0x00
ata3-master: stat=0xff err=0x00 lsb=0x00 msb=0x00
ata3-master: stat=0xff err=0x00 lsb=0x00 msb=0x00
ata3-master: stat=0xff err=0x00 lsb=0x00 msb=0x00
ata3-master: stat=0xff err=0x00 lsb=0x00 msb=0x00
ata3-master: stat=0xff err=0x00 lsb=0x00 msb=0x00
ata3: reset tp2 mask=00 stat0=ff stat1=00 devices=0x0
ata3: at 0xe2000000 on atapci0
ata3: [MPSAFE]
atapci1: <nVidia nForce2 UDMA133 controller> port 0xf000-0xf00f at device 9.0 on pci0
ata0: reset tp1 mask=03 ostat0=50 ostat1=50
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave:  stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 mask=03 stat0=50 stat1=50 devices=0x3<ATA_SLAVE,ATA_MASTER>
ata0: at 0x1f0 irq 14 on atapci1
ata0: [MPSAFE]
ata1: reset tp1 mask=03 ostat0=50 ostat1=50
ata1-master: stat=0x10 err=0x01 lsb=0x14 msb=0xeb
ata1-slave:  stat=0x90 err=0x01 lsb=0x14 msb=0xeb
ata1-slave:  stat=0x90 err=0x01 lsb=0x14 msb=0xeb
ata1-slave:  stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: reset tp2 mask=03 stat0=10 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
ata1: at 0x170 irq 15 on atapci1
ata1: [MPSAFE]
pcib2: <PCIBIOS PCI-PCI bridge> at device 12.0 on pci0
pcib2:   secondary bus     2
pcib2:   subordinate bus   2
pcib2:   I/O decode        0xb000-0xbfff
pcib2:   memory decode     0xdc000000-0xddffffff
pcib2:   prefetched decode 0xfff00000-0xfffff
pci2: <PCI bus> on pcib2
pci2: physical bus=2
	map[10]: type 4, range 32, base 0000b000, size  7, enabled
	map[14]: type 1, range 32, base dd000000, size  7, enabled
pci_cfgintr_valid: BIOS irq 11 is valid
pci_cfgintr: 2:1 INTA BIOS irq 11
found->	vendor=0x10b7, dev=0x9201, revid=0x40
	bus=2, slot=1, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x0a (2500 ns), maxlat=0x0a (2500 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
xl0: <3Com 3c920B-EMB Integrated Fast Etherlink XL> port 0xb000-0xb07f mem 0xdd000000-0xdd00007f irq 11 at device 1.0 on pci2
pcib2: device xl0 requested decoded memory range 0xdd000000-0xdd00007f
xl0: using memory mapped I/O
xl0: Ethernet address: 00:26:54:10:8c:0f
xl0: media options word: 40
xl0: found MII/AUTO
miibus0: <MII bus> on xl0
acphy0: <AC101L 10/100 media interface> on miibus0
acphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: bpf attached
fwohci0: vendor=10de, dev=6e
fwohci0: <1394 Open Host Controller Interface> mem 0xe3085000-0xe308503f,0xe3084000-0xe30847ff irq 5 at device 13.0 on pci0
fwohci0: latency timer 0 -> 32.
fwohci0: cache size 0 -> 8.
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 00:e0:18:00:00:29:7e:99
fwohci0: resetting OHCI...done (loop=0)
fwohci0: fwphy_rddata: 0x2 loop=1, retry=0
fwohci0: fwphy_rddata: 0x3 loop=1, retry=0
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: fwphy_rddata: 0x5 loop=1, retry=0
fwohci0: Enable 1394a Enhancements
fwohci0: fwphy_rddata: 0x5 loop=1, retry=0
fwohci0: fwphy_rddata: 0x2 loop=1, retry=0
fwohci0: fwphy_rddata: 0x4 loop=1, retry=0
fwohci0: fwphy_rddata: 0x4 loop=1, retry=0
fwohci0: fwphy_rddata: 0x4 loop=1, retry=0
fwohci0: Link S400, max_rec 2048 bytes.
fwohci0: BUS_OPT 0xfadba812 -> 0xfadba812
fwohci0: fwohci_set_intr: 1
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:e0:18:29:7e:99
fwe0: bpf attached
sbp0: <SBP-2/SCSI over FireWire> on firewire0
sbp_attach (cold=1)
fwohci0: Initiate bus reset
fwohci0: fwphy_rddata: 0x1 loop=1, retry=0
fwohci0: fwphy_rddata: 0x1 loop=1, retry=0
pcib3: <PCI-PCI bridge> at device 30.0 on pci0
pcib3:   secondary bus     3
pcib3:   subordinate bus   4
pcib3:   I/O decode        0xc000-0xcfff
pcib3:   memory decode     0xde000000-0xe0ffffff
pcib3:   prefetched decode 0xd0000000-0xd7ffffff
pci3: <PCI bus> on pcib3
pci3: physical bus=3
	map[10]: type 3, range 32, base d0000000, size 27, enabled
	map[14]: type 4, range 32, base 0000c000, size  8, enabled
	map[18]: type 1, range 32, base e0000000, size 17, enabled
	map[20]: type 1, range 32, base e0020000, size 16, enabled
pci_cfgintr_virgin: using routable PCI-only interrupt 5
pci_cfgintr: ROUTE_INTERRUPT failed.
found->	vendor=0x1002, dev=0x4242, revid=0x00
	bus=3, slot=0, func=0
	class=03-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0087, statreg=0x02b0, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=5
	powerspec 2  supports D0 D1 D2 D3  current D0
found->	vendor=0x1002, dev=0x4243, revid=0x00
	bus=3, slot=0, func=1
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0187, statreg=0x02b0, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
pci3: <display, VGA> at device 0.0 (no driver attached)
pcib4: <PCI-PCI bridge> at device 0.1 on pci3
pcib4:   secondary bus     4
pcib4:   subordinate bus   4
pcib4:   I/O decode        0xf000-0xfff
pcib4:   memory decode     0xdf000000-0xdfffffff
pcib4:   prefetched decode 0xfff00000-0xfffff
pci4: <PCI bus> on pcib4
pci4: physical bus=4
	map[10]: type 1, range 32, base df000000, size 12, enabled
pci_cfgintr_virgin: using routable PCI-only interrupt 5
pci_cfgintr: ROUTE_INTERRUPT failed.
found->	vendor=0x11c1, dev=0x5811, revid=0x04
	bus=4, slot=0, func=0
	class=0c-00-10, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0290, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x0c (3000 ns), maxlat=0x18 (6000 ns)
	intpin=a, irq=5
	powerspec 2  supports D0 D1 D2 D3  current D0
fwohci1: <Lucent FW322/323> mem 0xdf000000-0xdf000fff irq 5 at device 0.0 on pci4
fwohci1: latency timer 32 -> 32.
fwohci1: cache size 8 -> 8.
pcib4: device fwohci1 requested decoded memory range 0xdf000000-0xdf000fff
pcib3: device fwohci1 requested decoded memory range 0xdf000000-0xdf000fff
fwohci1: OHCI version 1.0 (ROM=1)
fwohci1: No. of Isochronous channel is 8.
fwohci1: EUI64 00:06:bb:00:16:00:49:14
fwohci1: resetting OHCI...done (loop=0)
fwohci1: phy read failed(1).
fwohci1: fwphy_rddata: 0x2 loop=1, retry=1
fwohci1: fwphy_rddata: 0x3 loop=1, retry=0
fwohci1: Phy 1394a available S400, 3 ports.
fwohci1: fwphy_rddata: 0x5 loop=1, retry=0
fwohci1: Enable 1394a Enhancements
fwohci1: fwphy_rddata: 0x5 loop=1, retry=0
fwohci1: fwphy_rddata: 0x2 loop=1, retry=0
fwohci1: fwphy_rddata: 0x4 loop=1, retry=0
fwohci1: fwphy_rddata: 0x4 loop=1, retry=0
fwohci1: fwphy_rddata: 0x4 loop=1, retry=0
fwohci1: Link S400, max_rec 2048 bytes.
fwohci1: BUS_OPT 0xa002 -> 0xf800a002
fwohci1: fwohci_set_intr: 1
firewire1: <IEEE1394(FireWire) bus> on fwohci1
fwe1: <Ethernet over FireWire> on firewire1
if_fwe1: Fake Ethernet address: 02:06:bb:00:49:14
fwe1: bpf attached
sbp_identify
sbp_probe
sbp1: <SBP-2/SCSI over FireWire> on firewire1
sbp_attach (cold=1)
fwohci1: Initiate bus reset
fwohci1: fwphy_rddata: 0x1 loop=1, retry=0
fwohci1: fwphy_rddata: 0x1 loop=1, retry=0
fwohci1: BUS reset
sbp_post_busreset
fwohci1: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode
firewire1: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
fwohci1: fw_set_bus_manager: 0->0 (loop=0)
firewire1: bus manager 0 (me)
send phy_config root_node=-1 gap_count=5
fwohci1: maxdesc: 2
fwohci1: start AT DMA status=0
unknown: status reg test failed fe
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
ex_isa_identify()
pnpbios: 17 devices, largest 98 bytes
PNP0200: adding dma mask 0x10
PNP0200: adding io range 0-0xf, size=0x10, align=0
PNP0200: adding io range 0x81-0x83, size=0x3, align=0
PNP0200: adding io range 0x87-0x87, size=0x1, align=0
PNP0200: adding io range 0x89-0x8b, size=0x3, align=0
PNP0200: adding io range 0x8f-0x91, size=0x3, align=0
PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0
pnpbios: handle 1 device ID PNP0200 (0002d041)
PNP0100: adding irq mask 0x1
PNP0100: adding io range 0x40-0x43, size=0x4, align=0
pnpbios: handle 2 device ID PNP0100 (0001d041)
PNP0b00: adding irq mask 0x100
PNP0b00: adding io range 0x70-0x71, size=0x2, align=0
pnpbios: handle 3 device ID PNP0b00 (000bd041)
PNP0303: adding irq mask 0x2
PNP0303: adding io range 0x60-0x60, size=0x1, align=0
PNP0303: adding io range 0x64-0x64, size=0x1, align=0
pnpbios: handle 4 device ID PNP0303 (0303d041)
PNP0800: adding io range 0x61-0x61, size=0x1, align=0
pnpbios: handle 5 device ID PNP0800 (0008d041)
PNP0c04: adding irq mask 0x2000
PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0
pnpbios: handle 6 device ID PNP0c04 (040cd041)
PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000
PNP0c01: adding fixed memory32 range 0xfffe0000-0xffffffff, size=0x20000
PNP0c01: adding fixed memory32 range 0xfec00000-0xfec0ffff, size=0x10000
PNP0c01: adding fixed memory32 range 0xfee00000-0xfee0ffff, size=0x10000
PNP0c01: adding fixed memory32 range 0x100000-0xffffff, size=0xf00000
pnpbios: handle 7 device ID PNP0c01 (010cd041)
PNP0c02: adding fixed memory32 range 0xf0000-0xf3fff, size=0x4000
PNP0c02: adding fixed memory32 range 0xf4000-0xf7fff, size=0x4000
PNP0c02: adding fixed memory32 range 0xf8000-0xfffff, size=0x8000
PNP0c02: adding fixed memory32 range 0xd6800-0xd7fff, size=0x1800
pnpbios: handle 8 device ID PNP0c02 (020cd041)
PNP0a03: adding io range 0x4d0-0x4d1, size=0x2, align=0
PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0
pnpbios: handle 9 device ID PNP0a03 (030ad041)
PNP0f13: adding irq mask 0x1000
pnpbios: handle 10 device ID PNP0f13 (130fd041)
PNP0501: adding irq mask 0x10
PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0
pnpbios: handle 11 device ID PNP0501 (0105d041)
PNP0700: adding dma mask 0x4
PNP0700: adding io range 0x3f0-0x3f5, size=0x6, align=0
PNP0700: adding io range 0x3f7-0x3f7, size=0x1, align=0
PNP0700: adding irq mask 0x40
pnpbios: handle 12 device ID PNP0700 (0007d041)
PNP0401: adding dma mask 0x8
PNP0401: adding irq mask 0x80
PNP0401: adding io range 0x378-0x37f, size=0x8, align=0
PNP0401: adding io range 0x778-0x77f, size=0x8, align=0
pnpbios: handle 14 device ID PNP0401 (0104d041)
PNP0501: adding irq mask 0x8
PNP0501: adding io range 0x2f8-0x2ff, size=0x8, align=0
pnpbios: handle 15 device ID PNP0501 (0105d041)
PNPb006: adding irq mask 0x400
PNPb006: adding io range 0x330-0x333, size=0x4, align=0
pnpbios: handle 16 device ID PNPb006 (06b0d041)
PNPb02f: adding io range 0x201-0x201, size=0x1, align=0
pnpbios: handle 17 device ID PNPb02f (2fb0d041)
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xd6000-0xd67ff,0xd4000-0xd57ff,0xd0000-0xd3fff,0xc0000-0xccfff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00000000, flags:00000000, packet size:4
psm0: syncmask:08, syncbits:08
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x61 0x71 0x61 0x61
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: irq maps: 0x61 0x69 0x61 0x61
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
adv1: Invalid baseport of 0x0 specified. Nearest valid baseport is 0x100.  Failing probe.
adv1: Invalid baseport of 0x40 specified. Nearest valid baseport is 0x100.  Failing probe.
adv1: Invalid baseport of 0x70 specified. Nearest valid baseport is 0x100.  Failing probe.
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0303> at port 0x60 on isa0
adv1: Invalid baseport of 0x61 specified. Nearest valid baseport is 0x100.  Failing probe.
unknown: <PNP0800> failed to probe at port 0x61 on isa0
adv1: Invalid baseport of 0xf0 specified. Nearest valid baseport is 0x100.  Failing probe.
adv1: Invalid baseport of 0x4d0 specified. Nearest valid baseport is 0x330.  Failing probe.
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0f13> at irq 12 on isa0
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> at port 0x3f8-0x3ff on isa0
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0700> at port 0x3f0-0x3f5 on isa0
unknown: <PNP0401> can't assign resources (port)
unknown: <PNP0401> at port 0x378-0x37f on isa0
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> at port 0x2f8-0x2ff on isa0
unknown: <PNPb006> failed to probe at port 0x330-0x333 irq 10 on isa0
adv1: Invalid baseport of 0x201 specified. Nearest valid baseport is 0x210.  Failing probe.
unknown: <PNPb02f> failed to probe at port 0x201 on isa0
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 1804103062 Hz quality 800
Timecounters tick every 10.000 msec
lo0: bpf attached
Current DB 0
ch = 0
 Current OP   KEY INT BR   len     Addr   Depend Stat: Cnt
3e206000 OUTL ST2 ALL ALL    12 00000000 3e206080 8411:0008 RUN,ACTIVE, ack complete(11)
0x000000e0 0x00450000 0xffbaffff 0x00000000
ata0-slave: pio=0x0c wdma=0x22 udma=0x44 cable=80pin
ata0-master: pio=0x0c wdma=0x22 udma=0x44 cable=80pin
ata0-master: setting PIO4 on nVidia nForce2 chip
ata0-master: setting UDMA66 on nVidia nForce2 chip
ata0-slave: setting PIO4 on nVidia nForce2 chip
ata0-slave: setting UDMA66 on nVidia nForce2 chip
GEOM: create disk ad0 dp=0xc6d12460
ad0: <WDC WD1200BB-00CAA1/17.07W17> ATA-5 disk at ata0-master
ad0: 114473MB (234441648 sectors), 232581 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA66
GEOM: new disk ad0
ar: FreeBSD check1 failed
[0] f:00 typ:7 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:234436482
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 32256 length 120031478784 end 120031511039
GEOM: create disk ad1 dp=0xc6d12260
ad1: <Maxtor 53073U6/DA620CQ0> ATA-5 disk at ata0-slave
ad1: 29311MB (60030432 sectors), 59554 C, 16 H, 63 S, 512 B
ad1: 16 secs/int, 1 depth queue, UDMA66
GEOM: new disk ad1
ar: FreeBSD check1 failed
ata1-slave: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
ata1-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
ata1-master: setting PIO4 on nVidia nForce2 chip
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/15/63 s:63 l:20008737
[1] f:00 typ:7 s(CHS):1023/255/63 e(CHS):1023/15/63 s:20008800 l:20008800
[2] f:00 typ:12 s(CHS):1023/0/1 e(CHS):1023/15/63 s:40017600 l:20008800
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad1s1, start 32256 length 10244473344 end 10244505599
GEOM: Configure ad1s2, start 10244505600 length 10244505600 end 20489011199
GEOM: Configure ad1s3, start 20489011200 length 10244505600 end 30733516799
GEOM: Configure ad1s1a, start 1073741824 length 9170731520 end 10244473343
GEOM: Configure ad1s1b, start 0 length 1073741824 end 1073741823
GEOM: Configure ad1s1c, start 0 length 10244473344 end 10244473343
bus_explore done
sbp_post_explore (sbp_cold=3)
ata1-slave: FAILURE - SETFEATURES SET TRANSFER MODE no interrupt
ata1-slave: FAILURE setting PIO4 on nVidia nForce2 chip
acd0: <CREATIVE DVD-ROM DVD1241E/VER 0.44> DVDROM drive at ata1 as master
acd0: read 1031KB/s (6875KB/s), 512KB buffer, PIO4
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, packet
acd0: Writes:
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: 120mm data disc
acd1: <LITE-ON LTR-48126S/2S0A> CDRW drive at ata1 as slave
acd1: read 8250KB/s (8250KB/s) write 172KB/s (8250KB/s), 2048KB buffer, BIOSPIO
acd1: Reads: CDR, CDRW, CDDA stream, packet
acd1: Writes: CDR, CDRW, test write, burnproof
acd1: Audio: play, 255 volume levels
acd1: Mechanism: ejectable tray, unlocked
acd1: Medium: no/blank disc
(probe6:sbp0:0:6:0): error 22
(probe6:sbp0:0:6:0): Unretryable Error
(probe7:sbp1:0:0:0): error 22
(probe7:sbp1:0:0:0): Unretryable Error
(probe0:sbp0:0:0:0): error 22
(probe0:sbp0:0:0:0): Unretryable Error
(probe1:sbp0:0:1:0): error 22
(probe1:sbp0:0:1:0): Unretryable Error
(probe2:sbp0:0:2:0): error 22
(probe2:sbp0:0:2:0): Unretryable Error
(probe3:sbp0:0:3:0): error 22
(probe3:sbp0:0:3:0): Unretryable Error
(probe4:sbp0:0:4:0): error 22
(probe4:sbp0:0:4:0): Unretryable Error
(probe5:sbp0:0:5:0): error 22
(probe5:sbp0:0:5:0): Unretryable Error
(probe8:sbp1:0:1:0): error 22
(probe8:sbp1:0:1:0): Unretryable Error
(probe9:sbp1:0:2:0): error 22
(probe9:sbp1:0:2:0): Unretryable Error
(probe10:sbp1:0:3:0): error 22
(probe10:sbp1:0:3:0): Unretryable Error
(probe11:sbp1:0:4:0): error 22
(probe11:sbp1:0:4:0): Unretryable Error
(probe12:sbp1:0:5:0): error 22
(probe12:sbp1:0:5:0): Unretryable Error
(probe13:sbp1:0:6:0): error 22
(probe13:sbp1:0:6:0): Unretryable Error
Mounting root from ufs:/dev/ad1s1a
start_init: trying /sbin/init
Linux ELF exec handler installed

FreeBSD desktop.kc8onw.net 5.2.1-RELEASE FreeBSD 5.2.1-RELEASE #0: Mon Feb 23 20:45:55 GMT 2004     root_at_wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC  i386
Received on Thu May 20 2004 - 06:58:52 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:54 UTC