On Wed, May 26, 2004 at 10:36:42AM -0400, John Baldwin wrote: > > Please tell me what data You need (like full where with argument > > values and addresses). > > The full dmesg prior to this. You can use a serial console to capture it if > needed. FreeBSD/i386 bootstrap loader, Revision 1.1 (kris_at_bento.FreeBSD.org, Thu Apr 1 07:33:55 PST 2004) Loading /boot/defaults/loader.conf /boot/kernel/kernel text=0x38cc60 data=0x3cb84+0x117b38 syms=[0x4+0x476b0+0x4+0x58e86] \ Hit [Enter] to boot immediately, or any other key for command prompt. Booting [/boot/kernel/kernel]... Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2-CURRENT #51: Tue May 25 18:00:15 PDT 2004 kris_at_bento.FreeBSD.org:/a/asami/portbuild/i386/src-client/sys/i386/compile/CLUSTER WARNING: WITNESS option enabled, expect reduced performance. Preloaded elf kernel "/boot/kernel/kernel" at 0xc0984000. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel Pentium III (851.94-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x683 Stepping = 3 Features=0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE> real memory = 1073741824 (1024 MB) avail memory = 1041334272 (993 MB) random: <entropy source, Software, Yarrow> Pentium Pro MTRR support enabled ACPI-0159: *** Error: AcpiLoadTables: Could not get RSDP, AE_NO_ACPI_TABLES ACPI-0213: *** Error: AcpiLoadTables: Could not load tables: AE_NO_ACPI_TABLES ACPI: table load failed: AE_NO_ACPI_TABLES npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface pcibios: BIOS version 2.10 pcib0: <Host to PCI bridge> at pcibus 0 on motherboard pir0: <PCI Interrupt Routing Table: 12 Entries> on motherboard pci0: <PCI bus> on pcib0 $PIR: 0:1 INTA routed to irq 10 $PIR: 0:1 INTB routed to irq 11 $PIR: 0:2 INTA routed to irq 5 $PIR: 0:7 INTA routed to irq 11 $PIR: 0:15 INTA routed to irq 11 pcib1: <PCIBIOS PCI-PCI bridge> at device 0.1 on pci0 pci1: <PCI bus> on pcib1 sym0: <1010-33> port 0xf800-0xf8ff mem 0xfeafe000-0xfeafffff,0xfeafac00-0xfeafafff irq 10 at device 1.0 on pci0 sym0: Symbios NVRAM, ID 7, Fast-80, LVD, parity checking sym0: open drain IRQ line driver, using on-chip SRAM sym0: using LOAD/STORE-based firmware. sym0: handling phase mismatch from SCRIPTS. sym0: [GIANT-LOCKED] sym1: <1010-33> port 0xf400-0xf4ff mem 0xfeafc000-0xfeafdfff,0xfeafa800-0xfeafabff irq 11 at device 1.1 on pci0 sym1: Symbios NVRAM, ID 7, Fast-80, LVD, parity checking sym1: open drain IRQ line driver, using on-chip SRAM sym1: using LOAD/STORE-based firmware. sym1: handling phase mismatch from SCRIPTS. sym1: [GIANT-LOCKED] pci0: <multimedia, audio> at device 2.0 (no driver attached) fxp0: <Intel 82559 Pro/100 Ethernet> port 0xfc40-0xfc7f mem 0xfe900000-0xfe9fffff,0xfeaf9000-0xfeaf9fff irq 11 at device 7.0 on pci0 miibus0: <MII bus> on fxp0 inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: Ethernet address: 00:e0:81:10:b6:73 fxp0: [GIANT-LOCKED] isab0: <PCI-ISA bridge> port 0x500-0x50f at device 15.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <ServerWorks ROSB4 UDMA33 controller> port 0xfcb0-0xfcbf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 15.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 ohci0: <OHCI (generic) USB controller> mem 0xfeaf8000-0xfeaf8fff irq 11 at device 15.2 on pci0 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 4 ports with 4 removable, self powered pcib2: <ServerWorks host to PCI bridge> at pcibus 2 on motherboard panic: device_set_ivars(NULL, ...) at line 1353 in file ../../../kern/subr_bus.c Debugger("panic") Stopped at Debugger+0x54: xchgl %ebx,in_Debugger.0
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:55 UTC