As of the last several CURRENT updates I've done, my CD burner no longer works. It's recognized at boot, but the functionality is completly broken. I've attached the latest dmesg.boot output after updating the system again yesterday. When I try to access the drive from the command line, I get nothing but i/o errors. -- Conrad Sabatier <conrads_at_cox.net> - "In Unix veritas" Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2-CURRENT #0: Wed May 26 09:27:37 CDT 2004 root_at_ip68-11-70-23.no.no.cox.net:/usr/obj/usr/src/sys/MYKERNEL Preloaded elf kernel "/boot/kernel/kernel" at 0xc0726000. Preloaded elf module "/boot/modules/if_fxp.ko" at 0xc07261f4. Preloaded elf module "/boot/modules/miibus.ko" at 0xc07262a0. Preloaded elf module "/boot/modules/snd_es137x.ko" at 0xc072634c. Preloaded elf module "/boot/modules/snd_pcm.ko" at 0xc07263fc. Preloaded elf module "/boot/modules/random.ko" at 0xc07264ac. Preloaded elf module "/boot/modules/acpi.ko" at 0xc0726558. Preloaded elf module "/boot/modules/aio.ko" at 0xc0726604. Preloaded elf module "/boot/modules/lpt.ko" at 0xc07266b0. Preloaded elf module "/boot/modules/ppi.ko" at 0xc072675c. Calibrating clock(s) ... i8254 clock: 1193236 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 998068201 Hz CPU: AMD Athlon(tm) Processor (998.07-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x622 Stepping = 2 Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PA T,PSE36,MMX,FXSR> AMD Features=0xc0400000<AMIE,DSP,3DNow!> Data TLB: 24 entries, fully associative Instruction TLB: 16 entries, fully associative L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L2 internal cache: 512 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative real memory = 536805376 (511 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000826000 - 0x000000001f6bffff, 518627328 bytes (126618 pages) avail memory = 519692288 (495 MB) bios32: Found BIOS32 Service Directory header at 0xc00f7a70 bios32: Entry = 0xfd6d0 (c00fd6d0) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xfd6d0+0x11e pnpbios: Found PnP BIOS data at 0xc00f7a40 pnpbios: Entry = f0000:9a6a Rev = 1.0 pnpbios: OEM ID 46b1110e Other BIOS signatures found: mem: <memory & I/O> Pentium Pro MTRR support enabled null: <null device, zero device> random: <entropy source, Software, Yarrow> npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <PTLTD RSDT> on motherboard acpi0: [GIANT-LOCKED] pci_open(1): mode 1 addr port (0x0cf8) is 0x80006004 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=70061022) pcibios: BIOS version 2.10 Found $PIR table, 10 entries at 0xc00fdf20 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs slot 1 0 3 A 0x04 3 4 5 6 7 10 11 12 14 15 slot 1 0 3 B 0x01 3 4 5 6 7 10 11 12 14 15 slot 1 0 3 C 0x02 3 4 5 6 7 10 11 12 14 15 slot 1 0 3 D 0x03 3 4 5 6 7 10 11 12 14 15 slot 2 0 4 A 0x01 3 4 5 6 7 10 11 12 14 15 slot 2 0 4 B 0x02 3 4 5 6 7 10 11 12 14 15 slot 2 0 4 C 0x03 3 4 5 6 7 10 11 12 14 15 slot 2 0 4 D 0x04 3 4 5 6 7 10 11 12 14 15 slot 3 0 9 A 0x02 3 4 5 6 7 10 11 12 14 15 slot 3 0 9 B 0x03 3 4 5 6 7 10 11 12 14 15 slot 3 0 9 C 0x04 3 4 5 6 7 10 11 12 14 15 slot 3 0 9 D 0x01 3 4 5 6 7 10 11 12 14 15 slot 4 0 6 A 0x03 3 4 5 6 7 10 11 12 14 15 slot 4 0 6 B 0x04 3 4 5 6 7 10 11 12 14 15 slot 4 0 6 C 0x01 3 4 5 6 7 10 11 12 14 15 slot 4 0 6 D 0x02 3 4 5 6 7 10 11 12 14 15 slot 5 0 15 A 0x04 3 4 5 6 7 10 11 12 14 15 slot 5 0 15 B 0x01 3 4 5 6 7 10 11 12 14 15 slot 5 0 15 C 0x02 3 4 5 6 7 10 11 12 14 15 slot 5 0 15 D 0x03 3 4 5 6 7 10 11 12 14 15 embedded 0 12 A 0x01 3 4 5 6 7 10 11 12 14 15 embedded 0 7 A 0x01 3 4 5 6 7 10 11 12 14 15 embedded 0 7 D 0x04 3 4 5 6 7 10 11 12 14 15 embedded 0 0 A 0x01 3 4 5 6 7 9 10 11 12 14 15 embedded 0 0 B 0x02 3 4 5 6 7 9 10 11 12 14 15 embedded 0 0 C 0x03 3 4 5 6 7 9 10 11 12 14 15 embedded 0 0 D 0x04 3 4 5 6 7 9 10 11 12 14 15 embedded 0 1 A 0x02 3 4 5 6 7 10 11 12 14 15 embedded 0 1 B 0x03 3 4 5 6 7 10 11 12 14 15 embedded 1 5 A 0x02 3 4 5 6 7 10 11 12 14 15 embedded 1 5 B 0x03 3 4 5 6 7 10 11 12 14 15 AcpiOsDerivePciId: bus 0 dev 7 func 0 acpi0: Power Button (fixed) ACPI timer looks BAD min = 1, max = 16777214, width = 16777213 ACPI timer looks BAD min = 1, max = 16777214, width = 16777213 ACPI timer looks BAD min = 0, max = 3, width = 3 ACPI timer looks BAD min = 0, max = 16777214, width = 16777214 ACPI timer looks BAD min = 1, max = 16777214, width = 16777213 ACPI timer looks BAD min = 1, max = 16777210, width = 16777209 ACPI timer looks BAD min = 1, max = 16777214, width = 16777213 ACPI timer looks BAD min = 0, max = 3, width = 3 ACPI timer looks BAD min = 1, max = 16777214, width = 16777213 ACPI timer looks BAD min = 0, max = 3, width = 3 Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 unknown: I/O range not supported acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0x8000-0x807f,0x4000-0x400f,0xcf8-0xcff,0xa9, 0xa8,0x92 on acpi0 ACPI PCI link initial configuration: \\_SB_.PCI0.PIB_.LNKD irq 11: [ 5 7 10 11 12] low,level,sharable 0.3.0 \\_SB_.PCI0.PIB_.LNKA irq 5: [ 5 7 10 11 12] low,level,sharable 0.3.1 \\_SB_.PCI0.PIB_.LNKB irq 10: [ 5 7 10 11 12] low,level,sharable 0.3.2 \\_SB_.PCI0.PIB_.LNKC irq 0: [ 5 7 10 11 12] low,level,sharable 0.3.3 \\_SB_.PCI0.PIB_.LNKA irq 5: [ 5 7 10 11 12] low,level,sharable 0.4.0 \\_SB_.PCI0.PIB_.LNKB irq 10: [ 5 7 10 11 12] low,level,sharable 0.4.1 \\_SB_.PCI0.PIB_.LNKC irq 0: [ 5 7 10 11 12] low,level,sharable 0.4.2 \\_SB_.PCI0.PIB_.LNKD irq 11: [ 5 7 10 11 12] low,level,sharable 0.4.3 \\_SB_.PCI0.PIB_.LNKB irq 10: [ 5 7 10 11 12] low,level,sharable 0.9.0 \\_SB_.PCI0.PIB_.LNKC irq 0: [ 5 7 10 11 12] low,level,sharable 0.9.1 \\_SB_.PCI0.PIB_.LNKD irq 11: [ 5 7 10 11 12] low,level,sharable 0.9.2 \\_SB_.PCI0.PIB_.LNKA irq 5: [ 5 7 10 11 12] low,level,sharable 0.9.3 \\_SB_.PCI0.PIB_.LNKC irq 0: [ 5 7 10 11 12] low,level,sharable 0.6.0 \\_SB_.PCI0.PIB_.LNKD irq 11: [ 5 7 10 11 12] low,level,sharable 0.6.1 \\_SB_.PCI0.PIB_.LNKA irq 5: [ 5 7 10 11 12] low,level,sharable 0.6.2 \\_SB_.PCI0.PIB_.LNKB irq 10: [ 5 7 10 11 12] low,level,sharable 0.6.3 \\_SB_.PCI0.PIB_.LNKD irq 11: [ 5 7 10 11 12] low,level,sharable 0.15.0 \\_SB_.PCI0.PIB_.LNKA irq 5: [ 5 7 10 11 12] low,level,sharable 0.15.1 \\_SB_.PCI0.PIB_.LNKB irq 10: [ 5 7 10 11 12] low,level,sharable 0.15.2 \\_SB_.PCI0.PIB_.LNKC irq 0: [ 5 7 10 11 12] low,level,sharable 0.15.3 \\_SB_.PCI0.PIB_.LNKA irq 5: [ 5 7 10 11 12] low,level,sharable 0.12.0 \\_SB_.PCI0.PIB_.LNKA irq 5: [ 5 7 10 11 12] low,level,sharable 0.7.0 \\_SB_.PCI0.PIB_.LNKD irq 11: [ 5 7 10 11 12] low,level,sharable 0.7.3 \\_SB_.PCI0.PIB_.LNKA irq 5: [ 5 7 10 11 12] low,level,sharable 0.0.0 \\_SB_.PCI0.PIB_.LNKB irq 10: [ 5 7 10 11 12] low,level,sharable 0.0.1 \\_SB_.PCI0.PIB_.LNKC irq 0: [ 5 7 10 11 12] low,level,sharable 0.0.2 \\_SB_.PCI0.PIB_.LNKD irq 11: [ 5 7 10 11 12] low,level,sharable 0.0.3 \\_SB_.PCI0.PIB_.LNKB irq 10: [ 5 7 10 11 12] low,level,sharable 0.1.0 \\_SB_.PCI0.PIB_.LNKC irq 0: [ 5 7 10 11 12] low,level,sharable 0.1.1 ACPI PCI link before setting link priority: \\_SB_.PCI0.PIB_.LNKC: interrupts: 5 7 10 11 12 penalty: 1570 1770 1470 1470 1770 references: 7 priority: 0 ACPI PCI link before fixup for boot-disabled links: \\_SB_.PCI0.PIB_.LNKC: interrupts: 5 7 10 11 12 penalty: 1570 1770 1470 1470 1770 references: 7 priority: 11270 ACPI PCI link after fixup for boot-disabled links: ACPI PCI link arbitrated configuration: \\_SB_.PCI0.PIB_.LNKD irq 11: [ 5 7 10 11 12] low,level,sharable 0.3.0 \\_SB_.PCI0.PIB_.LNKA irq 5: [ 5 7 10 11 12] low,level,sharable 0.3.1 \\_SB_.PCI0.PIB_.LNKB irq 10: [ 5 7 10 11 12] low,level,sharable 0.3.2 \\_SB_.PCI0.PIB_.LNKC irq 11: [ 5 7 10 11 12] low,level,sharable 0.3.3 \\_SB_.PCI0.PIB_.LNKA irq 5: [ 5 7 10 11 12] low,level,sharable 0.4.0 \\_SB_.PCI0.PIB_.LNKB irq 10: [ 5 7 10 11 12] low,level,sharable 0.4.1 \\_SB_.PCI0.PIB_.LNKC irq 11: [ 5 7 10 11 12] low,level,sharable 0.4.2 \\_SB_.PCI0.PIB_.LNKD irq 11: [ 5 7 10 11 12] low,level,sharable 0.4.3 \\_SB_.PCI0.PIB_.LNKB irq 10: [ 5 7 10 11 12] low,level,sharable 0.9.0 \\_SB_.PCI0.PIB_.LNKC irq 11: [ 5 7 10 11 12] low,level,sharable 0.9.1 \\_SB_.PCI0.PIB_.LNKD irq 11: [ 5 7 10 11 12] low,level,sharable 0.9.2 \\_SB_.PCI0.PIB_.LNKA irq 5: [ 5 7 10 11 12] low,level,sharable 0.9.3 \\_SB_.PCI0.PIB_.LNKC irq 11: [ 5 7 10 11 12] low,level,sharable 0.6.0 \\_SB_.PCI0.PIB_.LNKD irq 11: [ 5 7 10 11 12] low,level,sharable 0.6.1 \\_SB_.PCI0.PIB_.LNKA irq 5: [ 5 7 10 11 12] low,level,sharable 0.6.2 \\_SB_.PCI0.PIB_.LNKB irq 10: [ 5 7 10 11 12] low,level,sharable 0.6.3 \\_SB_.PCI0.PIB_.LNKD irq 11: [ 5 7 10 11 12] low,level,sharable 0.15.0 \\_SB_.PCI0.PIB_.LNKA irq 5: [ 5 7 10 11 12] low,level,sharable 0.15.1 \\_SB_.PCI0.PIB_.LNKB irq 10: [ 5 7 10 11 12] low,level,sharable 0.15.2 \\_SB_.PCI0.PIB_.LNKC irq 11: [ 5 7 10 11 12] low,level,sharable 0.15.3 \\_SB_.PCI0.PIB_.LNKA irq 5: [ 5 7 10 11 12] low,level,sharable 0.12.0 \\_SB_.PCI0.PIB_.LNKA irq 5: [ 5 7 10 11 12] low,level,sharable 0.7.0 \\_SB_.PCI0.PIB_.LNKD irq 11: [ 5 7 10 11 12] low,level,sharable 0.7.3 \\_SB_.PCI0.PIB_.LNKA irq 5: [ 5 7 10 11 12] low,level,sharable 0.0.0 \\_SB_.PCI0.PIB_.LNKB irq 10: [ 5 7 10 11 12] low,level,sharable 0.0.1 \\_SB_.PCI0.PIB_.LNKC irq 11: [ 5 7 10 11 12] low,level,sharable 0.0.2 \\_SB_.PCI0.PIB_.LNKD irq 11: [ 5 7 10 11 12] low,level,sharable 0.0.3 \\_SB_.PCI0.PIB_.LNKB irq 10: [ 5 7 10 11 12] low,level,sharable 0.1.0 \\_SB_.PCI0.PIB_.LNKC irq 11: [ 5 7 10 11 12] low,level,sharable 0.1.1 pci0: <ACPI PCI bus> on pcib0 pci0: physical bus=0 map[10]: type 3, range 32, base e8000000, size 27, enabled map[14]: type 3, range 32, base e0006000, size 12, enabled map[18]: type 4, range 32, base 000010d0, size 2, port disabled found-> vendor=0x1022, dev=0x7006, revid=0x25 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x2210, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x7007, revid=0x01 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0220, cachelnsz=0 (dwords) lattimer=0x63 (2970 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns) pci0:3:0: Transition from D1 to D0 map[10]: type 4, range 32, base 00001000, size 6, enabled pcib0: matched entry for 0.3.INTA (src \\_SB_.PCI0.PIB_.LNKD) pcib0: slot 3 INTA is routed to irq 11 found-> vendor=0x1274, dev=0x1371, revid=0x08 bus=0, slot=3, func=0 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0410, cachelnsz=0 (dwords) lattimer=0x60 (2880 ns), mingnt=0x0c (3000 ns), maxlat=0x80 (32000 ns) intpin=a, irq=11 powerspec 1 supports D0 D2 D3 current D0 map[10]: type 1, range 32, base e0004000, size 12, enabled map[14]: type 4, range 32, base 00001040, size 6, enabled map[18]: type 1, range 32, base e0100000, size 20, enabled pcib0: matched entry for 0.4.INTA (src \\_SB_.PCI0.PIB_.LNKA) pcib0: slot 4 INTA is routed to irq 5 found-> vendor=0x8086, dev=0x1229, revid=0x08 bus=0, slot=4, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0013, statreg=0x0290, cachelnsz=16 (dwords) lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns) intpin=a, irq=5 powerspec 2 supports D0 D1 D2 D3 current D0 found-> vendor=0x1106, dev=0x0686, revid=0x14 bus=0, slot=7, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0087, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 000010c0, size 4, enabled found-> vendor=0x1106, dev=0x0571, revid=0x06 bus=0, slot=7, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 00001080, size 5, enabled pcib0: matched entry for 0.7.INTD (src \\_SB_.PCI0.PIB_.LNKD) pcib0: slot 7 INTD is routed to irq 11 found-> vendor=0x1106, dev=0x3038, revid=0x06 bus=0, slot=7, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0017, statreg=0x0200, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=11 map[20]: type 4, range 32, base 000010a0, size 5, enabled pcib0: matched entry for 0.7.INTD (src \\_SB_.PCI0.PIB_.LNKD) pcib0: slot 7 INTD is routed to irq 11 found-> vendor=0x1106, dev=0x3038, revid=0x06 bus=0, slot=7, func=3 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0017, statreg=0x0200, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=11 found-> vendor=0x1106, dev=0x3057, revid=0x10 bus=0, slot=7, func=4 class=06-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 1, range 32, base e0005000, size 11, enabled map[14]: type 1, range 32, base e0000000, size 14, enabled pcib0: matched entry for 0.12.INTA (src \\_SB_.PCI0.PIB_.LNKA) pcib0: slot 12 INTA is routed to irq 5 found-> vendor=0x104c, dev=0x8019, revid=0x00 bus=0, slot=12, func=0 class=0c-00-10, hdrtype=0x00, mfdev=0 cmdreg=0x0016, statreg=0x0210, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x03 (750 ns), maxlat=0x04 (1000 ns) intpin=a, irq=5 powerspec 1 supports D0 D2 D3 current D0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xf000-0xfff pcib1: memory decode 0xe0200000-0xe02fffff pcib1: prefetched decode 0xf0000000-0xf7ffffff ACPI PCI link initial configuration: \\_SB_.PCI0.PIB_.LNKB irq 10: [ 5 7 10 11 12] low,level,sharable 1.5.0 \\_SB_.PCI0.PIB_.LNKC irq 11: [ 5 7 10 11 12] low,level,sharable 1.5.1 ACPI PCI link before setting link priority: ACPI PCI link before fixup for boot-disabled links: ACPI PCI link after fixup for boot-disabled links: ACPI PCI link arbitrated configuration: \\_SB_.PCI0.PIB_.LNKB irq 10: [ 5 7 10 11 12] low,level,sharable 1.5.0 \\_SB_.PCI0.PIB_.LNKC irq 11: [ 5 7 10 11 12] low,level,sharable 1.5.1 pci1: <ACPI PCI bus> on pcib1 pci1: physical bus=1 map[10]: type 1, range 32, base e0200000, size 19, enabled pcib1: device (null) requested decoded memory range 0xe0200000-0xe027ffff map[14]: type 3, range 32, base f0000000, size 27, enabled pcib1: device (null) requested decoded memory range 0xf0000000-0xf7ffffff pcib1: matched entry for 1.5.INTA (src \\_SB_.PCI0.PIB_.LNKB) pcib1: slot 5 INTA is routed to irq 10 found-> vendor=0x5333, dev=0x8a22, revid=0x04 bus=1, slot=5, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0230, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0xff (63750 ns) intpin=a, irq=10 powerspec 1 supports D0 D1 D2 D3 current D0 pci1: <display, VGA> at device 5.0 (no driver attached) pcm0: <AudioPCI ES1373-8> port 0x1000-0x103f irq 11 at device 3.0 on pci0 pcm0: Reserved 0x40 bytes for rid 0x10 type 4 at 0x1000 pcm0: <Cirrus Logic CS4297A AC97 Codec (id = 0x43525913)> pcm0: Codec features headphone, 20 bit DAC, 18 bit ADC, 6 bit master volume, Cry stal Semi 3D Stereo Enhancement pcm0: Primary codec extended features AMAP pcm0: [GIANT-LOCKED] pcm0: sndbuf_setmap 8e000, 1000; 0xc4044000 -> 8e000 pcm0: sndbuf_setmap 8c000, 1000; 0xc4042000 -> 8c000 fxp0: <Intel 82559 Pro/100 Ethernet> port 0x1040-0x107f mem 0xe0100000-0xe01ffff f,0xe0004000-0xe0004fff irq 5 at device 4.0 on pci0 fxp0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xe0004000 fxp0: using memory space register mapping fxp0: PCI IDs: 8086 1229 8086 000c 0008 fxp0: Dynamic Standby mode is disabled miibus0: <MII bus> on fxp0 inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: bpf attached fxp0: Ethernet address: 00:90:27:65:67:c9 fxp0: [GIANT-LOCKED] isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <VIA 82C686A UDMA66 controller> port 0x10c0-0x10cf,0x376,0x170-0x177,0x 3f6,0x1f0-0x1f7 at device 7.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x10c0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=50 ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata0-slave: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 mask=03 stat0=50 stat1=50 devices=0x3<ATA_SLAVE,ATA_MASTER> ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=50 ostat1=50 ata1-master: stat=0xd0 err=0x04 lsb=0x00 msb=0x00 ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb ata1-slave: stat=0x10 err=0x01 lsb=0x14 msb=0xeb ata1: reset tp2 mask=03 stat0=00 stat1=10 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER> ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] pci0: <serial bus, USB> at device 7.2 (no driver attached) pci0: <serial bus, USB> at device 7.3 (no driver attached) isab1: <PCI-ISA bridge> at device 7.4 on pci0 isa: isa0 already exists; skipping it device_attach: isab1 attach returned 6 pci0: <serial bus, FireWire> at device 12.0 (no driver attached) sio0: irq maps: 0x1 0x11 0x1 0x1 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A ppc0: parallel port found at 0x378 ppc0: using extended I/O port range ppc0: EPP SPP ppc0 port 0x378-0x37f irq 7 on acpi0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 ppbus0: IEEE1284 device found /NIBBLE/NIBBLE_ID/Extensibility Link Probing for PnP devices on ppbus0: ppbus0: <EPSON Stylus COLOR 600> PRINTER ESCPL2,BDC lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 unknown: not probed (disabled) atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 atkbd0: [GIANT-LOCKED] unknown: not probed (disabled) ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it ppc: ppc0 already exists; skipping it sio: sio0 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <Option ROMs> at iomem 0xd0000-0xd0fff,0xc0000-0xcffff on isa0 fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <12 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0x1 0x1 0x1 0x1 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff isa_probe_children: probing PnP devices Device configuration finished. Timecounter "TSC" frequency 998068201 Hz quality 800 Timecounters tick every 1.000 msec lo0: bpf attached ata0-slave: pio=0x0c wdma=0x22 udma=0x45 cable=80pin ata0-master: pio=0x0c wdma=0x22 udma=0x44 cable=80pin ata0-master: setting PIO4 on VIA 82C686A chip ata0-master: setting UDMA66 on VIA 82C686A chip ata0-slave: setting PIO4 on VIA 82C686A chip ata0-slave: setting UDMA66 on VIA 82C686A chip ad0: <Maxtor 94091U8/FA520S60> ATA-5 disk at ata0-master ad0: 38166MB (78165360 sectors), 77545 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA66 GEOM: new disk ad0 GEOM: Configure ad0a, start 0 length 134217728 end 134217727 GEOM: Configure ad0b, start 134217728 length 1057521664 end 1191739391 GEOM: Configure ad0c, start 0 length 40020664320 end 40020664319 GEOM: Configure ad0e, start 1191739392 length 268435456 end 1460174847 GEOM: Configure ad0f, start 1460174848 length 268435456 end 1728610303 GEOM: Configure ad0g, start 1728610304 length 38292054016 end 40020664319 [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:78156162 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad0s1, start 32256 length 40015954944 end 40015987199 ad1: <WDC WD800BB-32BSA0/12.08C12> ATA-5 disk at ata0-slave ad1: 76319MB (156301488 sectors), 155061 C, 16 H, 63 S, 512 B ad1: 16 secs/int, 1 depth queue, UDMA66 ata1-slave: pio=0x0c wdma=0x22 udma=0xffffffff cable=40pin ata1-master: pio=0x0c wdma=0x22 udma=0xffffffff cable=40pin ata1-master: setting PIO4 on VIA 82C686A chip ata1-slave: setting PIO4 on VIA 82C686A chip ata1-slave: setting WDMA2 on VIA 82C686A chip acd0: <COMPAQ DVD-ROM SD-608/BC04> DVDROM drive at ata1 as master acd0: read 687KB/s (5500KB/s), 512KB buffer, PIO4 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet acd0: Writes: acd0: Audio: play, 255 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc acd1: <R/RW 4x4x24/C12a> CDRW drive at ata1 as slave acd1: read 5515KB/s (5515KB/s) write 689KB/s (689KB/s), 2048KB buffer, WDMA2 acd1: Reads: CDR, CDRW, CDDA stream, packet acd1: Writes: CDR, CDRW, test write acd1: Audio: play, 2 volume levels acd1: Mechanism: ejectable tray, unlocked acd1: Medium: no/blank disc GEOM: Configure ad0s1a, start 0 length 134217728 end 134217727 GEOM: Configure ad0s1b, start 4966055936 length 1073741824 end 6039797759 GEOM: Configure ad0s1c, start 0 length 40015954944 end 40015954943 GEOM: Configure ad0s1e, start 134217728 length 536870912 end 671088639 GEOM: Configure ad0s1f, start 671088640 length 4294967296 end 4966055935 GEOM: Configure ad0s1g, start 6039797760 length 33976157184 end 40015954943 GEOM: new disk ad1 GEOM: Configure ad1c, start 0 length 80026361856 end 80026361855 GEOM: Configure ad1e, start 0 length 80026361856 end 80026361855 [0] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/80/63 s:0 l:156301488 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad1s1, start 0 length 80026361856 end 80026361855 acd1: FAILURE - REQUEST_SENSE MEDIUM ERROR asc=0x57 ascq=0x00 error=0 acd1: FAILURE - REQUEST_SENSE MEDIUM ERROR asc=0x57 ascq=0x00 error=0 acd1: FAILURE - REQUEST_SENSE MEDIUM ERROR asc=0x57 ascq=0x00 error=0 acd1: FAILURE - REQUEST_SENSE MEDIUM ERROR asc=0x57 ascq=0x00 error=0 acd1: FAILURE - REQUEST_SENSE MEDIUM ERROR asc=0x57 ascq=0x00 error=0 acd1: FAILURE - REQUEST_SENSE MEDIUM ERROR asc=0x57 ascq=0x00 error=0 GEOM: Configure ad1s1c, start 0 length 80026361856 end 80026361855 GEOM: Configure ad1s1e, start 0 length 80026361856 end 80026361855 Mounting root from ufs:/dev/ad0s1a start_init: trying /sbin/init GEOM: Configure ad1c, start 0 length 80026361856 end 80026361855 GEOM: Configure ad1e, start 0 length 80026361856 end 80026361855 Linux ELF exec handler installed procfs registered linprocfs registered ipfw2 initialized, divert disabled, rule-based forwarding enabled, default to de ny, logging disabled fxp0: Microcode loaded, int_delay: 2000 usec bundle_max: 65535 fxp0: Microcode loaded, int_delay: 2000 usec bundle_max: 65535 fxp0: Microcode loaded, int_delay: 2000 usec bundle_max: 65535 End of MIME messageReceived on Thu May 27 2004 - 02:26:40 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:55 UTC