I have been experiencing serious problems with suspend mode 3 in FreeBSD 5.2 (current as of 5/24) on my Inspiron 8000 with BIOS A23. When I suspend mode 3 the screen goes blank then turns solid white. After the screen turns white the numlock, capslock and scrolllock on the keyboard and the HD activity light go solid. At this point the machine stops responding to any input and remains in this state forever (couple of hours anyway). If I then press the power button the screen and lights return to normal and the previous console text on the screen is visible. This lasts for about 2 seconds, then the screen goes blank and the system reboots. Anyone seen this before? Is there a module I am missing or that is conflicting? I have searched through Google for similar problems with the Inspiron, but came up with only references to it actually working. I must be doing something wrong then. Here is dmesg output to give you an idea of what I have loaded. Is there any other log or dump that would be helpful. Thanks in advance for any help. dmesg: Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2-CURRENT #8: Mon May 24 23:05:22 PDT 2004 root_at_osiris.amduat.net:/usr/obj/usr/src/sys/OSIRIS Preloaded elf kernel "/boot/kernel/kernel" at 0xc08f0000. Preloaded elf module "/boot/kernel/miibus.ko" at 0xc08f01cc. Preloaded elf module "/boot/kernel/if_wi.ko" at 0xc08f0278. Preloaded elf module "/boot/kernel/wlan.ko" at 0xc08f0324. Preloaded elf module "/boot/kernel/rc4.ko" at 0xc08f03d0. Preloaded elf module "/boot/kernel/if_xl.ko" at 0xc08f0478. Preloaded elf module "/boot/kernel/snd_maestro3.ko" at 0xc08f0524. Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc08f05d8. Preloaded elf module "/boot/kernel/usb.ko" at 0xc08f0684. Preloaded elf module "/boot/kernel/ugen.ko" at 0xc08f072c. Preloaded elf module "/boot/kernel/uhid.ko" at 0xc08f07d8. Preloaded elf module "/boot/kernel/ukbd.ko" at 0xc08f0884. Preloaded elf module "/boot/kernel/ulpt.ko" at 0xc08f0930. Preloaded elf module "/boot/kernel/ums.ko" at 0xc08f09dc. Preloaded elf module "/boot/kernel/umass.ko" at 0xc08f0a84. Preloaded elf module "/boot/kernel/cam.ko" at 0xc08f0b30. Preloaded elf module "/boot/kernel/agp.ko" at 0xc08f0bd8. Preloaded elf module "/boot/kernel/random.ko" at 0xc08f0c80. Preloaded elf module "/boot/kernel/speaker.ko" at 0xc08f0d2c. Preloaded elf module "/boot/kernel/acpi_video.ko" at 0xc08f0dd8. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc08f0e88. Preloaded elf module "/boot/kernel/aio.ko" at 0xc08f0f34. Preloaded elf module "/boot/kernel/fdc.ko" at 0xc08f0fdc. Preloaded elf module "/boot/kernel/smbios.ko" at 0xc08f1084. Preloaded elf module "/boot/kernel/intpm.ko" at 0xc08f1130. Preloaded elf module "/boot/kernel/cbb.ko" at 0xc08f11dc. Preloaded elf module "/boot/kernel/exca.ko" at 0xc08f1284. Preloaded elf module "/boot/kernel/pccard.ko" at 0xc08f1330. Preloaded elf module "/boot/kernel/cardbus.ko" at 0xc08f13dc. Preloaded elf module "/boot/kernel/ppbus.ko" at 0xc08f1488. Preloaded elf module "/boot/kernel/lpt.ko" at 0xc08f1534. Preloaded elf module "/boot/kernel/firewire.ko" at 0xc08f15dc. link_elf: symbol ppb_request_bus undefined KLD file lpt.ko - could not finalize loading Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel Pentium III (848.15-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x686 Stepping = 6 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 536780800 (511 MB) avail memory = 515526656 (491 MB) random: <entropy source, Software, Yarrow> Pentium Pro MTRR support enabled npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <DELL CPi R > on motherboard acpi0: [GIANT-LOCKED] pcibios: BIOS version 2.10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: <ACPI CPU (2 Cx states)> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 acpi_acad0: <AC Adapter> on acpi0 acpi_cmbat0: <Control Method Battery> on acpi0 acpi_cmbat1: <Control Method Battery> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib0: slot 31 INTD is routed to irq 10 agp0: <Intel 82815 (i815 GMCH) host to PCI bridge> mem 0xe4000000-0xe7ffffff at device 0.0 on pci0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pcib1: slot 0 INTA is routed to irq 11 pci1: <display, VGA> at device 0.0 (no driver attached) pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pcib2: slot 3 INTA is routed to irq 5 pcib2: slot 6 INTA is routed to irq 10 pcib2: slot 6 INTA is routed to irq 10 pcib2: slot 15 INTA is routed to irq 10 pcm0: <ESS Technology Maestro3> port 0xec00-0xecff mem 0xf8ffe000-0xf8ffffff irq 5 at device 3.0 on pci2 pcm0: failed: rid 0x10 is ioport, requested 3 pcm0: [GIANT-LOCKED] pcm0: <SigmaTel STAC9721/23 AC97 Codec> xl0: <3Com 3c556 Fast Etherlink XL> port 0xe800-0xe8ff mem 0xf8ffd800-0xf8ffd87f,0xf8ffdc00-0xf8ffdc7f irq 10 at device 6.0 on pci2 miibus0: <MII bus> on xl0 tdkphy0: <TDK 78Q2120 media interface> on miibus0 tdkphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl0: Ethernet address: 00:01:03:87:0b:fd xl0: [GIANT-LOCKED] pci2: <simple comms> at device 6.1 (no driver attached) cbb0: <TI4451 PCI-CardBus Bridge> at device 15.0 on pci2 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 pcib2: slot 15 INTA is routed to irq 10 cbb1: <TI4451 PCI-CardBus Bridge> at device 15.1 on pci2 cardbus1: <CardBus bus> on cbb1 pccard1: <16-bit PCCard bus> on cbb1 pcib2: slot 15 INTA is routed to irq 10 fwohci0: <Texas Instruments PCI4451> mem 0xf8ff8000-0xf8ffbfff,0xf8ffc800-0xf8ffcfff irq 10 at device 15.2 on pci2 fwohci0: [GIANT-LOCKED] fwohci0: OHCI version 1.0 (ROM=1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 47:4f:c0:00:38:20:c4:01 fwohci0: Phy 1394a available S400, 1 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwohci0: Initiate bus reset fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH2 UDMA100 controller> port 0xbfa0-0xbfaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xdce0-0xdcff irq 10 at device 31.2 on pci0 uhci0: [GIANT-LOCKED] usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered ums0: Logitech Inc. iFeel Mouse, rev 1.00/1.01, addr 2, iclass 3/1 ums0: 3 buttons and Z dir. atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0 speaker0 port 0x67,0x65,0x63,0x61 on acpi0 fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A acpi_video0: <ACPI video extension> on acpi0 smbios0: <System Management BIOS> at iomem 0xf6ed0-0xf6eee on motherboard smbios0: Version: 2.03 pmtimer0 on isa0 orm0: <Option ROM> at iomem 0xc0000-0xcffff on isa0 sc0: <System console> on isa0 sc0: VGA <16 virtual consoles, flags=0x200> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled Timecounter "TSC" frequency 848145010 Hz quality 800 Timecounters tick every 10.000 msec ad0: 19077MB <IC25N020ATCS04-0> [38760/16/63] at ata0-master UDMA100 acd0: DVDROM <TOSHIBA DVD-ROM SD-C2502> at ata0-slave UDMA33 Mounting root from ufs:/dev/ad0s1a vmmon: Module vmmon: registered with major=200 minor=0 tag=$Name: build-570 (3.2.x mvm) $ vmmon: Module vmmon: initialized vmnet1: Ethernet address: 00:bd:f4:13:00:01 xl0: promiscuous mode enabled vmnet1: promiscuous mode enabled drm0: <ATI Rage 128 Mobility MF (AGP)> port 0xcc00-0xccff mem 0xfcffc000-0xfcffffff,0xe8000000-0xebffffff irq 11 at device 0.0 on pci1 info: [drm] AGP at 0xe4000000 64MB info: [drm] Initialized r128 2.5.0 20030725 on minor 0 ums0: at uhub0 port 1 (addr 2) disconnected ums0: detached fwohci0: fwohci_pci_suspend fwohci0: fwohci_pci_resume: power_state = 0x00000000 fwohci0: Phy 1394a available S400, 1 ports. fwohci0: Link S400, max_rec 2048 bytes. fwohci0: Initiate bus reset wakeup from sleeping state (slept 02:00:28) fwohci0: BUS reset fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) ums0: Logitech Inc. iFeel Mouse, rev 1.00/1.01, addr 2, iclass 3/1 ums0: 3 buttons and Z dir. wi0: <Lucent Technologies WaveLAN/IEEE> at port 0xe000-0xe03f irq 10 function 0 config 1 on pccard1 wi0: [GIANT-LOCKED] wi0: using Lucent Technologies, WaveLAN/IEEE wi0: Lucent Firmware: Station (8.72.1) wi0: Ethernet address: 00:02:2d:08:63:7a wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps wi0: detached wi0: <Lucent Technologies WaveLAN/IEEE> at port 0xe000-0xe03f irq 10 function 0 config 1 on pccard1 -- Jacob S. Barrett jbarrett_at_amduat.net www.amduat.net "I don't suffer from insanity, I enjoy every minute of it."Received on Thu May 27 2004 - 17:51:22 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:55 UTC