FreeBSD vorpal.math.drexel.edu 5.3-STABLE FreeBSD 5.3-STABLE #0: Wed Nov 3 15:55:27 EST 2004 jsmith_at_vorpal.math.drexel.edu:/usr/obj/usr/src/sys/MYKERNEL i386 I'm running this version of FreeBSD on two machines. One is an IBM workstation with a hyperthreading CPU (2 processors). When I plug a mass storage device into the USB port of this machine (but not the uniprocessor machine), no USB device is created. dmesg produces: ------------------------------------------------------------------ Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.3-STABLE #0: Wed Nov 3 15:55:27 EST 2004 jsmith_at_vorpal.math.drexel.edu:/usr/obj/usr/src/sys/MYKERNEL Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz (2793.01-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf29 Stepping = 9 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Hyperthreading: 2 logical CPUs real memory = 1073152000 (1023 MB) avail memory = 1040527360 (992 MB) ACPI APIC Table: <PTLTD APIC > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0 <Version 2.0> irqs 0-23 on motherboard npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <PTLTD RSDT> on motherboard ACPI-1303: *** Error: Method execution failed [\\_SB_.PCI0.USB1._PRW] (Node 0xc2269900), AE_AML_NO_RETURN_VALUE ACPI-0239: *** Error: Method execution failed [\\_SB_.PCI0.USB1._PRW] (Node 0xc2269900), AE_AML_NO_RETURN_VALUE ACPI-1303: *** Error: Method execution failed [\\_SB_.PCI0.USB2._PRW] (Node 0xc22cfae0), AE_AML_NO_RETURN_VALUE ACPI-0239: *** Error: Method execution failed [\\_SB_.PCI0.USB2._PRW] (Node 0xc22cfae0), AE_AML_NO_RETURN_VALUE ACPI-1303: *** Error: Method execution failed [\\_SB_.PCI0.USB3._PRW] (Node 0xc22cf9c0), AE_AML_NO_RETURN_VALUE ACPI-0239: *** Error: Method execution failed [\\_SB_.PCI0.USB3._PRW] (Node 0xc22cf9c0), AE_AML_NO_RETURN_VALUE ACPI-1303: *** Error: Method execution failed [\\_SB_.PCI0.USB4._PRW] (Node 0xc22cf8a0), AE_AML_NO_RETURN_VALUE ACPI-0239: *** Error: Method execution failed [\\_SB_.PCI0.USB4._PRW] (Node 0xc22cf8a0), AE_AML_NO_RETURN_VALUE ACPI-1303: *** Error: Method execution failed [\\_SB_.PCI0.USBE._PRW] (Node 0xc22cf800), AE_AML_NO_RETURN_VALUE ACPI-0239: *** Error: Method execution failed [\\_SB_.PCI0.USBE._PRW] (Node 0xc22cf800), AE_AML_NO_RETURN_VALUE acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 cpu0: <ACPI CPU> port 0x530-0x537 on acpi0 cpu1: <ACPI CPU> port 0x530-0x537 on acpi0 cpu1: Failed to attach throttling P_CNT acpi_tz0: <Thermal Zone> port 0x530-0x537 on acpi0 acpi_tz0: _CRT value is absurd, ignored (6280.3C) pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <Intel 82865 host to AGP bridge> mem 0xc4000000-0xc7ffffff at device 0.0 on pci0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) pci1: <display> at device 0.1 (no driver attached) uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0x1800-0x181f irq 16 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered ukbd0: Silitek IBM USB Keyboard, rev 1.10/1.00, addr 2, iclass 3/1 kbd1 at ukbd0 uhid0: Silitek IBM USB Keyboard, rev 1.10/1.00, addr 2, iclass 3/1 uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0x1820-0x183f irq 19 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0x1840-0x185f irq 18 at device 29.2 on pci0 uhci2: [GIANT-LOCKED] usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0x1860-0x187f irq 16 at device 29.3 on pci0 uhci3: [GIANT-LOCKED] usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3 usb3: USB revision 1.0 uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered pci0: <serial bus, USB> at device 29.7 (no driver attached) pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci3: <ACPI PCI bus> on pcib2 em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port 0x3000-0x303f mem 0xc0200000-0xc021ffff irq 16 at device 11.0 on pci3 em0: Ethernet address: 00:0d:60:24:35:72 em0: Speed:N/A Duplex:N/A isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH5 UDMA100 controller> port 0x1880-0x188f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0 ata0: channel #0 on atapci0 ata1: channel #1 on atapci0 pci0: <serial bus, SMBus> at device 31.3 (no driver attached) pcm0: <Intel ICH5 (82801EB)> port 0x18c0-0x18ff,0x1c00-0x1cff mem 0xc0000800-0xc00008ff,0xc0000c00-0xc0000dff irq 17 at device 31.5 on pci0 pcm0: [GIANT-LOCKED] pcm0: <Analog Devices AD1981B AC97 Codec> acpi_button0: <Power Button> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0 fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A ppc0: <ECP parallel printer port> port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ACPI-1303: *** Error: Method execution failed [\\_SB_.PCI0.USB1._PRW] (Node 0xc2269900), AE_AML_NO_RETURN_VALUE ACPI-1303: *** Error: Method execution failed [\\_SB_.PCI0.USB2._PRW] (Node 0xc22cfae0), AE_AML_NO_RETURN_VALUE ACPI-1303: *** Error: Method execution failed [\\_SB_.PCI0.USB3._PRW] (Node 0xc22cf9c0), AE_AML_NO_RETURN_VALUE ACPI-1303: *** Error: Method execution failed [\\_SB_.PCI0.USB4._PRW] (Node 0xc22cf8a0), AE_AML_NO_RETURN_VALUE orm0: <ISA Option ROMs> at iomem 0xe0000-0xeffff,0xce000-0xcefff,0xcd000-0xcdfff,0xc0000-0xccfff on isa0 pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 10.000 msec em0: Link is up 100 Mbps Full Duplex acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0% ad0: 76324MB <Maxtor 6Y080L0/YAR41BW0> [155072/16/63] at ata0-master UDMA100 acd0: CDRW <HL-DT-ST RW/DVD GCC-4481B/1.03> at ata1-master UDMA33 SMP: AP CPU #1 Launched! cd0 at ata1 bus 0 target 0 lun 0 cd0: <HL-DT-ST RW/DVD GCC-4481B 1.03> Removable CD-ROM SCSI-0 device cd0: 33.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present Mounting root from ufs:/dev/ad0s1a ipfw2 initialized, divert disabled, rule-based forwarding disabled, default to deny, logging disabled em0: Link is up 100 Mbps Full Duplex ------------------------------------------------------------------ It's as if the system is unaware I inserted the Kanguru drive. The uniprocessor machine has no problem creating the device (with comments in the dmesg output). Any suggestions? -- Time blows wildly against my door | Justin R. Smith Stirring discarded sorrows | Mathematics Department Like dead leaves of summers past | Drexel University Shadows of what went before | Philadelphia, PA 19104 Making way for new tomorrows | New hopes, new fears, | Office: (215) 895-1847 and new ways that last | URL: vorpal.math.drexel.eduReceived on Wed Nov 03 2004 - 20:14:29 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:20 UTC