M. Warner Losh wrote: > In message: <4188A57B.3060005_at_nikiforov.ru> > : The things you have recommend was done :) > : This does not help > : Nov 3 12:29:27 latitude kernel: Status is 0x30000006 > : Nov 3 12:29:33 latitude kernel: Status is 0x30000810 > : Nov 3 12:29:33 latitude kernel: cbb0: card inserted: event=0x00000000, > : state=30000810 > : Nov 3 12:29:33 latitude kernel: cbb0: PC Card card activation failed > : So the card is still not working. > > Can you set the sysctl 'hw.cbb.debug=1' and 'hw.pccard.debug=1' before > inserting the card and send me the results? > > Hi! I did it and here is the log: Nov 5 12:22:46 latitude kernel: Status is 0x30000810 Nov 5 12:22:46 latitude kernel: cbb0: card inserted: event=0x00000000, state=30000810 Nov 5 12:22:46 latitude kernel: pccard0: chip_socket_enable Nov 5 12:22:46 latitude kernel: cbb_pcic_socket_enable: Nov 5 12:22:46 latitude kernel: cbb0: cbb_power: 3V Nov 5 12:22:46 latitude kernel: pccard0: read_cis Nov 5 12:22:48 latitude kernel: pccard0: check_cis_quirks Nov 5 12:22:48 latitude kernel: pccard0: CIS version PC Card Standard 5.0 Nov 5 12:22:48 latitude kernel: pccard0: CIS info: RICOH, Bay1Controller Nov 5 12:22:48 latitude kernel: pccard0: Manufacturer code 0x0, product 0x0 Nov 5 12:22:48 latitude kernel: pccard0: function 0: unknown (254), ccr addr 100 mask f Nov 5 12:22:48 latitude kernel: pccard0: function 0, config table entry 1: memory card; irq mask 0; memspace 0-fff; mwait_required rdybsy_active powerdown Nov 5 12:22:48 latitude kernel: pccard0: functions scanning Nov 5 12:22:48 latitude kernel: pccard0: Card has 1 functions. pccard_mfc is 0 Nov 5 12:22:48 latitude kernel: pccard0: Memory space not yet implemented. Nov 5 12:22:48 latitude kernel: pccard0: Neither memory nor I/O mampped Nov 5 12:22:48 latitude kernel: pccard0: Allocation failed for cfe 1 Nov 5 12:22:48 latitude kernel: cbb_pcic_socket_enable: Nov 5 12:22:48 latitude kernel: cbb0: cbb_power: 0V Nov 5 12:22:48 latitude kernel: cbb0: cbb_power: 3V Nov 5 12:22:48 latitude kernel: pccard0: No config entry could be allocated. -- С уважением (Best regads), Антон Никифоров (Anton Nikiforov)
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:21 UTC