I can't seem to use ataraid to create a 1.2TB array from 6 x 200GB discs. If I only use 5 of the discs it seems to work just fine. This is on CURRENT from today. Is this a known limitation? All 6 discs are located on a HighPoint RocketRAID 454 controller. ad4: 190782MB <ST3200822A/3.01> [387621/16/63] at ata2-master UDMA100 ad5: 190782MB <ST3200822A/3.01> [387621/16/63] at ata2-slave UDMA100 ad6: 190782MB <ST3200822A/3.01> [387621/16/63] at ata3-master UDMA100 ad7: 190782MB <ST3200822A/3.01> [387621/16/63] at ata3-slave UDMA100 ad8: 190782MB <ST3200822A/3.01> [387621/16/63] at ata4-master UDMA100 ad9: 190782MB <ST3200822A/3.01> [387621/16/63] at ata4-slave UDMA100 ERROR: ------ # atacontrol create RAID0 128 ad4 ad5 ad6 ad7 ad8 ad9 ar0: 9007199253788533MB <ATA RAID0 array> [1499975777/255/63] status: READY subdisks: disk0 READY on ad4 at ata2-master disk1 READY on ad5 at ata2-slave disk2 READY on ad6 at ata3-master disk3 READY on ad7 at ata3-slave disk4 READY on ad8 at ata4-master disk5 READY on ad9 at ata4-slave OK: --- # atacontrol create RAID0 128 ad4 ad5 ad6 ad7 ad8 ar0: 953911MB <ATA RAID0 array> [121606/255/63] status: READY subdisks: disk0 READY on ad4 at ata2-master disk1 READY on ad5 at ata2-slave disk2 READY on ad6 at ata3-master disk3 READY on ad7 at ata3-slave disk4 READY on ad8 at ata4-master /Daniel ErikssonReceived on Tue Nov 23 2004 - 20:44:08 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:23 UTC