Re: Problems with ANA-6944A + 5.3-BETA + IRQ sharing?

From: Heiko Grill <Heiko.Grill_at_sh-huber.de>
Date: Sat, 2 Oct 2004 13:48:33 +0200
Am Sonntag, 26. September 2004 19:07 schrieb Oliver Lehmann:
> Hi,
>
> I've a strange thing here, and would know If others are getting the same
> "results"
>
>  - FreeBSD 5.3-BETA4
>  - Adaptec ANA 6944A (4xde)
>  - Compaq NC6134 (2xfxp)
>
> I'm pinging from the system to a system connected through a switch to de2:
>
> root_at_gurke /root> ping nudel
> PING nudel.salatschuessel.net (10.0.0.21): 56 data bytes
> 64 bytes from 10.0.0.21: icmp_seq=0 ttl=64 time=0.687 ms
> 64 bytes from 10.0.0.21: icmp_seq=1 ttl=64 time=0.575 ms
> 64 bytes from 10.0.0.21: icmp_seq=2 ttl=64 time=0.629 ms
> 64 bytes from 10.0.0.21: icmp_seq=3 ttl=64 time=0.565 ms
> 64 bytes from 10.0.0.21: icmp_seq=4 ttl=64 time=0.577 ms
>
> it looks "ok"
>
> Now mounting a nfs share, and accessing (opening with vi) a file on it:
>
> 64 bytes from 10.0.0.21: icmp_seq=19 ttl=64 time=0.697 ms
> 64 bytes from 10.0.0.21: icmp_seq=20 ttl=64 time=0.574 ms
> 64 bytes from 10.0.0.21: icmp_seq=21 ttl=64 time=0.807 ms
> 64 bytes from 10.0.0.21: icmp_seq=22 ttl=64 time=253.249 ms
> 64 bytes from 10.0.0.21: icmp_seq=23 ttl=64 time=1.554 ms
> 64 bytes from 10.0.0.21: icmp_seq=24 ttl=64 time=513.415 ms
> 64 bytes from 10.0.0.21: icmp_seq=25 ttl=64 time=1110.697 ms
> 64 bytes from 10.0.0.21: icmp_seq=26 ttl=64 time=1011.975 ms
> 64 bytes from 10.0.0.21: icmp_seq=27 ttl=64 time=1112.534 ms
> 64 bytes from 10.0.0.21: icmp_seq=28 ttl=64 time=101.289 ms
> 64 bytes from 10.0.0.21: icmp_seq=29 ttl=64 time=1110.638 ms
> 64 bytes from 10.0.0.21: icmp_seq=30 ttl=64 time=1010.899 ms
> 64 bytes from 10.0.0.21: icmp_seq=31 ttl=64 time=1015.072 ms
> 64 bytes from 10.0.0.21: icmp_seq=32 ttl=64 time=1010.512 ms
> 64 bytes from 10.0.0.21: icmp_seq=33 ttl=64 time=1013.426 ms
> 64 bytes from 10.0.0.21: icmp_seq=34 ttl=64 time=1010.722 ms
> 64 bytes from 10.0.0.21: icmp_seq=35 ttl=64 time=1419.586 ms
> 64 bytes from 10.0.0.21: icmp_seq=36 ttl=64 time=446.113 ms
> 64 bytes from 10.0.0.21: icmp_seq=37 ttl=64 time=4038.742 ms
> 64 bytes from 10.0.0.21: icmp_seq=38 ttl=64 time=4039.750 ms
> 64 bytes from 10.0.0.21: icmp_seq=39 ttl=64 time=4041.047 ms
> 64 bytes from 10.0.0.21: icmp_seq=40 ttl=64 time=4041.045 ms
> 64 bytes from 10.0.0.21: icmp_seq=41 ttl=64 time=4045.762 ms
> 64 bytes from 10.0.0.21: icmp_seq=42 ttl=64 time=4041.257 ms
> 64 bytes from 10.0.0.21: icmp_seq=43 ttl=64 time=4041.038 ms
I have the same problem with the card. I plugged the card into a Siemens 
Scenic which I want to use as a router. Sometimes the card works 24h or 
longer, sometimes only a few hours. But if I enable Squid as a proxy on the 
Siemens the network hangs immediately. No chance for me. Only a reboot works.

I will try to solve the problem next week. 


Heiko


-- 
Sicherheitshaus Huber 
Dipl.-Ing Heiko Grill
Grenzstr. 13    26382 Wilhelmshaven
Tel.: 04421 - 98 399 84      Fax:  04421 - 12 11 8

Received on Sat Oct 02 2004 - 09:48:44 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:15 UTC