Hi list, I am trying out the very latest BETA7 on my Fujitsu Amilo A laptop. I am experiencing problems with DMA on my DVD drive. I remember that with 5.2.1 and IMO also with BETA4 the DVD drive acd0 was set to PIO4. That was ok, because DMA would not work properly when forced (although DMA is supported by the DVD drive and the motherbord). Now with BETA7 (and BETA6 which I tried before) the drive is set to DMA33, which apparently does not work ok. This leads to an extremely long pause at boot time. I first thought this will lock up, but after several (5-7!) minutes, the boot proceeds (with the DVD drive not working :-( ). When I manually disable DMA in loader.conf everything is ok. I would really like to have DMA working (good solution) OR detected as PIO4 (bad solution) in FreeBSD-stable. I'll attach my kernel config (mainly GENERIC with atapicam - and no, without atapicam also doesn't work, although maybe quicker bootup) and the dmesg output of verbose logging. Best regards, Roman \\_SB_.PCI0.LPCB.LNKH irq 0: [ 5 9 10 11] 11+ low,level,sharable 0.8.0 \\_SB_.PCI0.LPCB.LNKB irq 0: [11] 11+ low,level,sharable 0.9.0 \\_SB_.PCI0.LPCB.LNKC irq 0: [10] 0+ low,level,sharable 0.10.0 \\_SB_.PCI0.LPCB.LNKA irq 0: [11] 11+ low,level,sharable 0.11.0 \\_SB_.PCI0.LPCB.LNKB irq 0: [11] 11+ low,level,sharable 0.11.1 \\_SB_.PCI0.LPCB.LNKE irq 0: [ 5 9 10 11] 10+ low,level,sharable 0.15.0 \\_SB_.PCI0.LPCB.LNKB irq 0: [11] 11+ low,level,sharable 0.16.0 \\_SB_.PCI0.LPCB.LNKD irq 0: [10] 0+ low,level,sharable 0.20.0 pci0: <ACPI PCI bus> on pcib0 pci0: physical bus=0 map[10]: type 3, range 32, base f4000000, size 26, enabled map[14]: type 3, range 32, base f0800000, size 12, enabled map[18]: type 4, range 32, base 0000a010, size 2, port disabled found-> vendor=0x1002, dev=0xcab0, revid=0x13 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2230, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1002, dev=0x700f, revid=0x01 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0220, cachelnsz=0 (dwords) lattimer=0x63 (2970 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns) map[10]: type 1, range 32, base f0400000, size 12, enabled pcib0: matched entry for 0.2.INTA (src \\_SB_.PCI0.LPCB.LNKU) pcib0: possible interrupts: 9 ACPI PCI link arbitrated settings: \\_SB_.PCI0.LPCB.LNKB (references 3, priority 210): interrupts: 11 penalty: 70 \\_SB_.PCI0.LPCB.LNKU (references 1, priority 80): interrupts: 9 penalty: 80 \\_SB_.PCI0.LPCB.LNKG (references 1, priority 70): interrupts: 10 11 9 5 penalty: 50 70 80 80 \\_SB_.PCI0.LPCB.LNKH (references 1, priority 70): interrupts: 10 11 9 5 penalty: 50 70 80 80 \\_SB_.PCI0.LPCB.LNKA (references 1, priority 70): interrupts: 11 penalty: 70 \\_SB_.PCI0.LPCB.LNKE (references 1, priority 70): interrupts: 10 11 9 5 penalty: 50 70 80 80 \\_SB_.PCI0.LPCB.LNKC (references 1, priority 50): interrupts: 10 penalty: 50 \\_SB_.PCI0.LPCB.LNKD (references 1, priority 50): interrupts: 10 penalty: 50 ACPI-1303: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.LNKU._CRS] (Node 0xc1e6a0c0), AE_AML_UNINITIALIZED_LOCAL ACPI-0239: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.LNKU._CRS] (Node 0xc1e6a0c0), AE_AML_UNINITIALIZED_LOCAL acpi link set: _CRS failed for link \\_SB_.PCI0.LPCB.LNKU - AE_AML_UNINITIALIZED_LOCAL acpi link set: curr irq 0 != 9 for \\_SB_.PCI0.LPCB.LNKU pcib0: slot 2 INTA routed to irq 9 via \\_SB_.PCI0.LPCB.LNKU found-> vendor=0x10b9, dev=0x5237, revid=0x03 bus=0, slot=2, func=0 class=0c-03-10, hdrtype=0x00, mfdev=0 cmdreg=0x0017, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns) intpin=a, irq=9 powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base f0401000, size 12, enabled map[14]: type 4, range 32, base 00008400, size 8, enabled pcib0: matched entry for 0.3.INTA (src \\_SB_.PCI0.LPCB.LNKG) pcib0: possible interrupts: 5 9 10 11 ACPI PCI link arbitrated settings: \\_SB_.PCI0.LPCB.LNKB (references 3, priority 420): interrupts: 11 penalty: 140 \\_SB_.PCI0.LPCB.LNKA (references 1, priority 140): interrupts: 11 penalty: 140 \\_SB_.PCI0.LPCB.LNKG (references 1, priority 130): interrupts: 10 5 11 9 penalty: 100 110 140 170 \\_SB_.PCI0.LPCB.LNKH (references 1, priority 130): interrupts: 10 5 11 9 penalty: 100 110 140 170 \\_SB_.PCI0.LPCB.LNKE (references 1, priority 130): interrupts: 10 5 11 9 penalty: 100 110 140 170 \\_SB_.PCI0.LPCB.LNKC (references 1, priority 100): interrupts: 10 penalty: 100 \\_SB_.PCI0.LPCB.LNKD (references 1, priority 100): interrupts: 10 penalty: 100 pcib0: slot 3 INTA routed to irq 11 via \\_SB_.PCI0.LPCB.LNKG found-> vendor=0x10b9, dev=0x5457, revid=0x00 bus=0, slot=3, func=0 class=07-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 map[20]: type 4, range 32, base 0000a000, size 4, enabled found-> vendor=0x10b9, dev=0x5229, revid=0xc4 bus=0, slot=4, func=0 class=01-01-fa, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns) intpin=a, irq=255 powerspec 2 supports D0 D3 current D0 found-> vendor=0x10b9, dev=0x7101, revid=0x00 bus=0, slot=6, func=0 class=06-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10b9, dev=0x1533, revid=0x00 bus=0, slot=7, func=0 class=06-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x000f, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 1 supports D0 D3 current D0 map[10]: type 4, range 32, base 00008800, size 8, enabled map[14]: type 1, range 32, base f0402000, size 12, enabled pcib0: matched entry for 0.8.INTA (src \\_SB_.PCI0.LPCB.LNKH) pcib0: possible interrupts: 5 9 10 11 ACPI PCI link arbitrated settings: \\_SB_.PCI0.LPCB.LNKB (references 3, priority 660): interrupts: 11 penalty: 220 \\_SB_.PCI0.LPCB.LNKA (references 1, priority 220): interrupts: 11 penalty: 220 \\_SB_.PCI0.LPCB.LNKH (references 1, priority 190): interrupts: 5 10 11 9 penalty: 140 150 220 250 \\_SB_.PCI0.LPCB.LNKE (references 1, priority 190): interrupts: 5 10 11 9 penalty: 140 150 220 250 \\_SB_.PCI0.LPCB.LNKC (references 1, priority 150): interrupts: 10 penalty: 150 \\_SB_.PCI0.LPCB.LNKD (references 1, priority 150): interrupts: 10 penalty: 150 pcib0: slot 8 INTA routed to irq 11 via \\_SB_.PCI0.LPCB.LNKH found-> vendor=0x10b9, dev=0x5451, revid=0x02 bus=0, slot=8, func=0 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0xc290, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x18 (6000 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 00008c00, size 8, enabled map[14]: type 1, range 32, base f0406800, size 8, enabled pcib0: matched entry for 0.9.INTA (src \\_SB_.PCI0.LPCB.LNKB) pcib0: possible interrupts: 11 ACPI PCI link arbitrated settings: \\_SB_.PCI0.LPCB.LNKB (references 3, priority 900): interrupts: 11 penalty: 300 \\_SB_.PCI0.LPCB.LNKA (references 1, priority 300): interrupts: 11 penalty: 300 \\_SB_.PCI0.LPCB.LNKE (references 1, priority 250): interrupts: 5 10 11 9 penalty: 170 200 300 330 \\_SB_.PCI0.LPCB.LNKC (references 1, priority 200): interrupts: 10 penalty: 200 \\_SB_.PCI0.LPCB.LNKD (references 1, priority 200): interrupts: 10 penalty: 200 pcib0: slot 9 INTA routed to irq 11 via \\_SB_.PCI0.LPCB.LNKB found-> vendor=0x10ec, dev=0x8139, revid=0x10 bus=0, slot=9, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base f0406000, size 11, enabled map[14]: type 4, range 32, base 00008080, size 7, enabled pcib0: matched entry for 0.10.INTA (src \\_SB_.PCI0.LPCB.LNKC) pcib0: possible interrupts: 10 ACPI PCI link arbitrated settings: \\_SB_.PCI0.LPCB.LNKA (references 1, priority 400): interrupts: 11 penalty: 400 \\_SB_.PCI0.LPCB.LNKE (references 1, priority 315): interrupts: 5 10 11 9 penalty: 200 250 400 410 \\_SB_.PCI0.LPCB.LNKC (references 1, priority 250): interrupts: 10 penalty: 250 \\_SB_.PCI0.LPCB.LNKD (references 1, priority 250): interrupts: 10 penalty: 250 pcib0: slot 10 INTA routed to irq 10 via \\_SB_.PCI0.LPCB.LNKC found-> vendor=0x1106, dev=0x3044, revid=0x46 bus=0, slot=10, func=0 class=0c-00-10, hdrtype=0x00, mfdev=0 cmdreg=0x0013, statreg=0x0210, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x20 (8000 ns) intpin=a, irq=10 powerspec 2 supports D0 D2 D3 current D0 map[10]: type 1, range 32, base 00000000, size 12, enabled pcib0: matched entry for 0.11.INTA (src \\_SB_.PCI0.LPCB.LNKA) pcib0: possible interrupts: 11 ACPI PCI link arbitrated settings: \\_SB_.PCI0.LPCB.LNKA (references 1, priority 470): interrupts: 11 penalty: 470 \\_SB_.PCI0.LPCB.LNKE (references 1, priority 375): interrupts: 5 10 11 9 penalty: 230 310 470 490 \\_SB_.PCI0.LPCB.LNKD (references 1, priority 310): interrupts: 10 penalty: 310 pcib0: slot 11 INTA routed to irq 11 via \\_SB_.PCI0.LPCB.LNKA found-> vendor=0x1524, dev=0x1420, revid=0x01 bus=0, slot=11, func=0 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0xc0 (48000 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 1 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base 00000000, size 12, enabled pcib0: matched entry for 0.11.INTB (src \\_SB_.PCI0.LPCB.LNKB) pcib0: slot 11 INTB is already routed to irq 11 found-> vendor=0x1524, dev=0x1420, revid=0x01 bus=0, slot=11, func=1 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x03 (750 ns) intpin=b, irq=11 powerspec 1 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base f0405000, size 12, enabled pcib0: matched entry for 0.15.INTA (src \\_SB_.PCI0.LPCB.LNKE) pcib0: possible interrupts: 5 9 10 11 ACPI PCI link arbitrated settings: \\_SB_.PCI0.LPCB.LNKE (references 1, priority 435): interrupts: 5 10 11 9 penalty: 260 360 550 570 \\_SB_.PCI0.LPCB.LNKD (references 1, priority 360): interrupts: 10 penalty: 360 pcib0: slot 15 INTA routed to irq 10 via \\_SB_.PCI0.LPCB.LNKE found-> vendor=0x10b9, dev=0x5237, revid=0x03 bus=0, slot=15, func=0 class=0c-03-10, hdrtype=0x00, mfdev=0 cmdreg=0x0017, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xb000-0xbfff pcib1: memory decode 0xf0500000-0xf05fffff pcib1: prefetched decode 0xf8000000-0xfbffffff ACPI PCI link initial configuration: \\_SB_.PCI0.LPCB.LNKC irq*10: [10] 0+ low,level,sharable 1.5.0 pci1: <ACPI PCI bus> on pcib1 pci1: physical bus=1 map[10]: type 3, range 32, base f8000000, size 26, enabled pcib1: device (null) requested decoded memory range 0xf8000000-0xfbffffff map[14]: type 4, range 32, base 0000b000, size 8, enabled pcib1: device (null) requested decoded I/O range 0xb000-0xb0ff map[18]: type 1, range 32, base f0500000, size 16, enabled pcib1: device (null) requested decoded memory range 0xf0500000-0xf050ffff pcib1: matched entry for 1.5.INTA (src \\_SB_.PCI0.LPCB.LNKC) pcib1: slot 5 INTA is already routed to irq 10 found-> vendor=0x1002, dev=0x4336, revid=0x00 bus=1, slot=5, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0287, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 drm0: <ATI Radeon RS100 Mobility U1> port 0xb000-0xb0ff mem 0xf0500000-0xf050ffff,0xf8000000-0xfbffffff irq 10 at device 5.0 on pci1 info: [drm] Initialized radeon 1.11.0 20020828 on minor 0 ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0xf0400000-0xf0400fff irq 9 at device 2.0 on pci0 ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xf0400000 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pci0: <simple comms> at device 3.0 (no driver attached) atapci0: <AcerLabs Aladdin UDMA100 controller> port 0xa000-0xa00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 4.0 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xa000 ata0: channel #0 on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0 ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata0: [MPSAFE] ata1: channel #1 on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=50 ostat1=00 ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb ata1-slave: stat=0x00 err=0x04 lsb=0x00 msb=0x00 ata1: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER> ata1: [MPSAFE] pci0: <bridge, PCI-unknown> at device 6.0 (no driver attached) isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 pcm0: <Acer Labs M5451> port 0x8800-0x88ff mem 0xf0402000-0xf0402fff irq 11 at device 8.0 on pci0 pcm0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x8800 pcm0: <Avance Logic ALC202 AC97 Codec (id = 0x414c4740)> pcm0: Codec features headphone, 20 bit DAC, 18 bit ADC, 6 bit master volume, Realtek 3D Stereo Enhancement pcm0: Primary codec extended features variable rate PCM, double rate PCM, reserved 1, AMAP, reserved 4 pcm0: [GIANT-LOCKED] pcm0: sndbuf_setmap 2ce15000, 1000; 0xc1ea1000 -> 2ce15000 pcm0: sndbuf_setmap 2ce33000, 1000; 0xc1e9f000 -> 2ce33000 pcm0: sndbuf_setmap 2ce51000, 1000; 0xc1e9d000 -> 2ce51000 pcm0: sndbuf_setmap 2ce12000, 1000; 0xc1ebe000 -> 2ce12000 pcm0: sndbuf_setmap 2cdd0000, 1000; 0xc1ebc000 -> 2cdd0000 re0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x8c00 rl0: <RealTek 8139 10/100BaseTX> port 0x8c00-0x8cff mem 0xf0406800-0xf04068ff irq 11 at device 9.0 on pci0 miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: bpf attached rl0: Ethernet address: 00:02:3f:af:14:fd rl0: [MPSAFE] fwohci0: <VIA Fire II (VT6306)> port 0x8080-0x80ff mem 0xf0406000-0xf04067ff irq 10 at device 10.0 on pci0 fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xf0406000 fwohci0: [MPSAFE] fwohci0: OHCI version 1.0 (ROM=1) fwohci0: No. of Isochronous channels is 8. fwohci0: EUI64 00:02:3f:28:27:00:18:b4 fwohci0: Phy 1394a available S400, 3 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:02:3f:00:18:b4 fwe0: bpf attached fwe0: Ethernet address: 02:02:3f:00:18:b4 fwe0: if_start running deferred for Giant sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) cbb0: <ENE CB1420 PCI-CardBus Bridge> irq 11 at device 11.0 on pci0 cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0x80000000 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb0: [MPSAFE] cbb0: PCI Configuration space: 0x00: 0x14201524 0x02100007 0x06070001 0x00824010 0x10: 0x80000000 0x020000a0 0x20020200 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x0440010b 0x40: 0x100a1734 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x0844d021 0x00000000 0x00000000 0x011c1122 0x90: 0x604406c0 0x00000000 0x00000000 0x00000000 0xa0: 0xfe110001 0x00c00000 0x0000000a 0x0000000b 0xb0: 0x0000000b 0x00000000 0x00000000 0x00000000 0xc0: 0x00801033 0x00800080 0x10080c11 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 cbb1: <ENE CB1420 PCI-CardBus Bridge> irq 11 at device 11.1 on pci0 cbb1: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0x80001000 cardbus1: <CardBus bus> on cbb1 pccard1: <16-bit PCCard bus> on cbb1 cbb1: [MPSAFE] cbb1: PCI Configuration space: 0x00: 0x14201524 0x02100007 0x06070001 0x00824010 0x10: 0x80001000 0x020000a0 0x20030300 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x0740020b 0x40: 0x100a1734 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x0844d021 0x00000000 0x00000000 0x011c1122 0x90: 0x604406c0 0x00000000 0x00000000 0x00000000 0xa0: 0xfe110001 0x00c00000 0x0000000a 0x0000000b 0xb0: 0x0000000b 0x00000000 0x00000000 0x00000000 0xc0: 0x00801033 0x00800080 0x10080c11 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 ohci1: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0xf0405000-0xf0405fff irq 10 at device 15.0 on pci0 ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xf0405000 ohci1: [GIANT-LOCKED] usb1: OHCI version 1.0, legacy support usb1: SMM does not respond, resetting usb1: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci1 usb1: USB revision 1.0 uhub1: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0067 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 atkbd0: [GIANT-LOCKED] psm0: unable to allocate IRQ psmcpnp0 irq 12 on acpi0 psm0: current command byte:0067 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model GlidePoint, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000008, packet size:3 psm0: syncmask:c0, syncbits:00 fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 fdc0: ic_type 90 part_id 80 fdc0: [MPSAFE] fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0: using extended I/O port range ppc0: ECP SPP ECP+EPP SPP ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 0 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/1 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 plip0: bpf attached lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 sio0: irq maps: 0x401 0x411 0x401 0x401 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A acpi_ec0: info: new max delay is 900 us acpi_cmbat0: <Control Method Battery> on acpi0 acpi_acad0: <AC Adapter> on acpi0 ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it fdc: fdc0 already exists; skipping it ppc: ppc0 already exists; skipping it sio: sio0 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 ex_isa_identify() unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff ahc_isa_probe 8: ioport 0x8c00 alloc failed sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <ISA Option ROMs> at iomem 0xd8000-0xdbfff,0xcf000-0xcffff,0xc0000-0xcefff on isa0 pmtimer0 on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0x401 0x401 0x401 0x401 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k vga0: vga: WARNING: video mode switching is not fully supported on this adapter VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 e7 a3 4f 67 8f 6c 1d 24 b3 00 6f 0d 0e 00 00 07 80 49 8f 8f 28 1f 47 6d a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 00 00 03 00 02 e7 a3 4f 67 8f 6c 1d 24 b3 00 6f 0d 0e 00 00 07 80 49 8f 8f 28 1f 47 6d a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. procfs registered Timecounter "TSC" frequency 1523912529 Hz quality 800 Timecounters tick every 10.000 msec lo0: bpf attached acpi_cmbat0: battery initialization start acpi_cmbat0: battery initialization done, tried 1 times acpi_acad0: acline initialization start acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times acpi_tz0: _AC0: temperature 77.0 >= setpoint 70.0 acpi_tz0: switched from NONE to _AC0: 77.0C ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin ata0-master: setting PIO4 on AcerLabs Aladdin chip ata0-master: setting UDMA100 on AcerLabs Aladdin chip ad0: <FUJITSU MHR2030AT/40BA> ATA-6 disk at ata0-master ad0: 28615MB (58605120 sectors), 58140 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA100 ar: FreeBSD check1 failed ata1-master: pio=0x0c wdma=0x22 udma=0x42 cable=80pin ata1-master: setting PIO4 on AcerLabs Aladdin chip ata1-master: setting UDMA33 on AcerLabs Aladdin chip acd0: <TOSHIBA DVD-ROM SD-R2212/1013> CDRW drive at ata1 as master acd0: read 4134KB/s (4134KB/s) write 2755KB/s (2755KB/s), 2048KB buffer, UDMA33 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet acd0: Writes: CDR, CDRW, test write, burnproof acd0: Audio: play, 16 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc GEOM: new disk ad0 [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/147/63 s:63 l:45055521 [1] f:00 typ:7 s(CHS):1023/0/1 e(CHS):1023/254/63 s:45062325 l:13526730 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad0s1, start 32256 length 23068426752 end 23068459007 GEOM: Configure ad0s2, start 23071910400 length 6925685760 end 29997596159 GEOM: Configure ad0s1a, start 0 length 268435456 end 268435455 GEOM: Configure ad0s1b, start 268435456 length 1514971136 end 1783406591 GEOM: Configure ad0s1c, start 0 length 23068426752 end 23068426751 GEOM: Configure ad0s1d, start 1783406592 length 268435456 end 2051842047 GEOM: Configure ad0s1e, start 2051842048 length 268435456 end 2320277503 GEOM: Configure ad0s1f, start 2320277504 length 20748149248 end 23068426751 acpi_tz0: switched from _AC0 to NONE: 66.0C (probe0:ata0:0:0:0): error 22 (probe0:ata0:0:0:0): Unretryable Error (probe1:ata0:0:1:0): error 22 (probe1:ata0:0:1:0): Unretryable Error (probe0:ata0:0:0:0): error 22 (probe0:ata0:0:0:0): Unretryable Error (probe1:ata0:0:1:0): error 22 (probe1:ata0:0:1:0): Unretryable Error (probe3:ata1:0:1:0): error 22 (probe3:ata1:0:1:0): Unretryable Error (probe3:ata1:0:1:0): error 22 (probe3:ata1:0:1:0): Unretryable Error (probe4:sbp0:0:0:0): error 22 (probe4:sbp0:0:0:0): Unretryable Error (probe5:sbp0:0:1:0): error 22 (probe5:sbp0:0:1:0): Unretryable Error (probe6:sbp0:0:2:0): error 22 (probe6:sbp0:0:2:0): Unretryable Error (probe7:sbp0:0:3:0): error 22 (probe7:sbp0:0:3:0): Unretryable Error (probe8:sbp0:0:4:0): error 22 (probe8:sbp0:0:4:0): Unretryable Error (probe9:sbp0:0:5:0): error 22 (probe9:sbp0:0:5:0): Unretryable Error (probe10:sbp0:0:6:0): error 22 (probe10:sbp0:0:6:0): Unretryable Error ata1: reiniting channel .. ata1: reset tp1 mask=03 ostat0=58 ostat1=00 acd0: stat=0x00 err=0x01 lsb=0x14 msb=0xeb ata1-slave: stat=0x00 err=0x04 lsb=0x00 msb=0x00 ata1: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER> ata1: resetting done .. acd0: pio=0x0c wdma=0x22 udma=0x42 cable=80pin acd0: setting PIO4 on AcerLabs Aladdin chip acd0: setting UDMA33 on AcerLabs Aladdin chip ata1: device config done .. (probe0:ata1:0:1:0): error 22 (probe0:ata1:0:1:0): Unretryable Error acpi_ec0: info: new max delay is 920 us ata1: reiniting channel .. ata1: reset tp1 mask=03 ostat0=58 ostat1=00 acd0: stat=0x00 err=0x01 lsb=0x14 msb=0xeb ata1-slave: stat=0x00 err=0x04 lsb=0x00 msb=0x00 ata1: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER> ata1: resetting done .. acd0: pio=0x0c wdma=0x22 udma=0x42 cable=80pin acd0: setting PIO4 on AcerLabs Aladdin chip acd0: setting UDMA33 on AcerLabs Aladdin chip ata1: device config done .. (probe0:ata1:0:1:0): error 22 (probe0:ata1:0:1:0): Unretryable Error ata1: reiniting channel .. ata1: reset tp1 mask=03 ostat0=58 ostat1=00 acd0: stat=0x00 err=0x01 lsb=0x14 msb=0xeb ata1-slave: stat=0x00 err=0x04 lsb=0x00 msb=0x00 ata1: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER> ata1: resetting done .. acd0: pio=0x0c wdma=0x22 udma=0x42 cable=80pin acd0: setting PIO4 on AcerLabs Aladdin chip acd0: setting UDMA33 on AcerLabs Aladdin chip ata1: device config done .. (probe0:ata1:0:1:0): error 22 (probe0:ata1:0:1:0): Unretryable Error ata1: reiniting channel .. ata1: reset tp1 mask=03 ostat0=58 ostat1=00 acd0: stat=0x00 err=0x01 lsb=0x14 msb=0xeb ata1-slave: stat=0x00 err=0x04 lsb=0x00 msb=0x00 ata1: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER> ata1: resetting done .. acd0: pio=0x0c wdma=0x22 udma=0x42 cable=80pin acd0: setting PIO4 on AcerLabs Aladdin chip acd0: setting UDMA33 on AcerLabs Aladdin chip ata1: device config done .. (probe0:ata1:0:1:0): error 22 (probe0:ata1:0:1:0): Unretryable Error ata1: reiniting channel .. ata1: reset tp1 mask=03 ostat0=58 ostat1=00 acd0: stat=0x00 err=0x01 lsb=0x14 msb=0xeb ata1-slave: stat=0x00 err=0x04 lsb=0x00 msb=0x00 ata1: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER> ata1: resetting done .. acd0: pio=0x0c wdma=0x22 udma=0x42 cable=80pin acd0: setting PIO4 on AcerLabs Aladdin chip acd0: setting UDMA33 on AcerLabs Aladdin chip ata1: device config done .. (probe0:ata1:0:1:0): error 22 (probe0:ata1:0:1:0): Unretryable Error ata1: reiniting channel .. ata1: reset tp1 mask=03 ostat0=58 ostat1=00 acd0: stat=0x00 err=0x01 lsb=0x14 msb=0xeb ata1-slave: stat=0x00 err=0x04 lsb=0x00 msb=0x00 ata1: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER> ata1: resetting done .. acd0: pio=0x0c wdma=0x22 udma=0x42 cable=80pin acd0: setting PIO4 on AcerLabs Aladdin chip acd0: setting UDMA33 on AcerLabs Aladdin chip ata1: device config done .. Mounting root from ufs:/dev/ad0s1a start_init: trying /sbin/init Linux ELF exec handler installed linprocfs registered ipfw2 initialized, divert disabled, rule-based forwarding disabled, default to deny, logging disabled acpi_tz0: _AC0: temperature 71.0 >= setpoint 70.0 acpi_tz0: switched from NONE to _AC0: 71.0C splash: image decoder found: green_saver (probe0:ata1:0:1:0): error 22 (probe0:ata1:0:1:0): Unretryable Error acpi_ec0: info: new max delay is 970 us acpi_tz0: switched from _AC0 to NONE: 62.0C acpi_ec0: info: new max delay is 11000 us ata1: reiniting channel .. ata1: reset tp1 mask=03 ostat0=58 ostat1=00 acd0: stat=0x00 err=0x01 lsb=0x14 msb=0xeb ata1-slave: stat=0x00 err=0x04 lsb=0x00 msb=0x00 ata1: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER> ata1: resetting done .. acd0: pio=0x0c wdma=0x22 udma=0x42 cable=80pin acd0: setting PIO4 on AcerLabs Aladdin chip acd0: setting UDMA33 on AcerLabs Aladdin chip ata1: device config done .. (probe0:ata1:0:1:0): error 22 (probe0:ata1:0:1:0): Unretryable Error # # GENERIC -- Generic kernel configuration file for FreeBSD/i386 # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD: src/sys/i386/conf/GENERIC,v 1.413.2.4 2004/09/11 04:28:39 scottl Exp $ machine i386 cpu I486_CPU cpu I586_CPU cpu I686_CPU ident GENERIC # To statically compile in device wiring instead of /boot/device.hints #hints "GENERIC.hints" # Default places to look for devices. options SCHED_4BSD # 4BSD scheduler options INET # InterNETworking options INET6 # IPv6 communications protocols options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options MD_ROOT # MD is a potential root device options NFSCLIENT # Network Filesystem Client options NFSSERVER # Network Filesystem Server options NFS_ROOT # NFS usable as /, requires NFSCLIENT options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options GEOM_GPT # GUID Partition Tables. options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!] options COMPAT_FREEBSD4 # Compatible with FreeBSD4 options SCSI_DELAY=15000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev options AHC_REG_PRETTY_PRINT # Print register bitfields in debug # output. Adds ~128k to driver. options AHD_REG_PRETTY_PRINT # Print register bitfields in debug # output. Adds ~215k to driver. options ADAPTIVE_GIANT # Giant mutex is adaptive. # To make an SMP kernel, the next two are needed options SMP # Symmetric MultiProcessor Kernel device apic # I/O APIC # Bus support. Do not remove isa, even if you have no isa slots device isa device eisa device pci # Floppy drives device fdc # ATA and ATAPI devices device ata device atadisk # ATA disk drives device ataraid # ATA RAID drives device atapicd # ATAPI CDROM drives device atapifd # ATAPI floppy drives device atapist # ATAPI tape drives options ATA_STATIC_ID # Static device numbering # SCSI Controllers device ahb # EISA AHA1742 family device ahc # AHA2940 and onboard AIC7xxx devices device ahd # AHA39320/29320 and onboard AIC79xx devices device amd # AMD 53C974 (Tekram DC-390(T)) device isp # Qlogic family device mpt # LSI-Logic MPT-Fusion #device ncr # NCR/Symbios Logic device sym # NCR/Symbios Logic (newer chipsets + those of `ncr') device trm # Tekram DC395U/UW/F DC315U adapters device adv # Advansys SCSI adapters device adw # Advansys wide SCSI adapters device aha # Adaptec 154x SCSI adapters device aic # Adaptec 15[012]x SCSI adapters, AIC-6[23]60. device bt # Buslogic/Mylex MultiMaster SCSI adapters device ncv # NCR 53C500 device nsp # Workbit Ninja SCSI-3 device stg # TMC 18C30/18C50 # SCSI peripherals device scbus # SCSI bus (required for SCSI) device ch # SCSI media changers device da # Direct Access (disks) device sa # Sequential Access (tape etc) device cd # CD device pass # Passthrough device (direct SCSI access) device ses # SCSI Environmental Services (and SAF-TE) # RAID controllers interfaced to the SCSI subsystem device amr # AMI MegaRAID device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID device ciss # Compaq Smart RAID 5* device dpt # DPT Smartcache III, IV - See NOTES for options device iir # Intel Integrated RAID device ips # IBM (Adaptec) ServeRAID device mly # Mylex AcceleRAID/eXtremeRAID device twa # 3ware 9000 series PATA/SATA RAID # RAID controllers device aac # Adaptec FSA RAID device aacp # SCSI passthrough for aac (requires CAM) device ida # Compaq Smart RAID device mlx # Mylex DAC960 family device pst # Promise Supertrak SX6000 device twe # 3ware ATA RAID # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc # AT keyboard controller device atkbd # AT keyboard device psm # PS/2 mouse device vga # VGA video card driver device splash # Splash screen and screen saver support # syscons is the default console driver, resembling an SCO console device sc # Enable this for the pcvt (VT220 compatible) console driver #device vt #options XSERVER # support for X server on a vt console #options FAT_CURSOR # start with block cursor device agp # support several AGP chipsets # Floating point support - do not disable. device npx # Power management support (see NOTES for more options) #device apm # Add suspend/resume support for the i8254. device pmtimer # PCCARD (PCMCIA) support # PCMCIA and cardbus bridge support device cbb # cardbus (yenta) bridge device pccard # PC Card (16-bit) bus device cardbus # CardBus (32-bit) bus # Serial (COM) ports device sio # 8250, 16[45]50 based serial ports # Parallel port device ppc device ppbus # Parallel port bus (required) device lpt # Printer device plip # TCP/IP over parallel device ppi # Parallel port interface device #device vpo # Requires scbus and da # If you've got a "dumb" serial or parallel PCI card that is # supported by the puc(4) glue driver, uncomment the following # line to enable it (connects to the sio and/or ppc drivers): #device puc # PCI Ethernet NICs. device de # DEC/Intel DC21x4x (``Tulip'') device em # Intel PRO/1000 adapter Gigabit Ethernet Card device ixgb # Intel PRO/10GbE Ethernet Card device txp # 3Com 3cR990 (``Typhoon'') device vx # 3Com 3c590, 3c595 (``Vortex'') # PCI Ethernet NICs that use the common MII bus controller code. # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! device miibus # MII bus support device bfe # Broadcom BCM440x 10/100 Ethernet device bge # Broadcom BCM570xx Gigabit Ethernet device dc # DEC/Intel 21143 and various workalikes device fxp # Intel EtherExpress PRO/100B (82557, 82558) device lge # Level 1 LXT1001 gigabit ethernet device nge # NatSemi DP83820 gigabit ethernet device pcn # AMD Am79C97x PCI 10/100 (precedence over 'lnc') device re # RealTek 8139C+/8169/8169S/8110S device rl # RealTek 8129/8139 device sf # Adaptec AIC-6915 (``Starfire'') device sis # Silicon Integrated Systems SiS 900/SiS 7016 device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet device ste # Sundance ST201 (D-Link DFE-550TX) device ti # Alteon Networks Tigon I/II gigabit Ethernet device tl # Texas Instruments ThunderLAN device tx # SMC EtherPower II (83c170 ``EPIC'') device vge # VIA VT612x gigabit ethernet device vr # VIA Rhine, Rhine II device wb # Winbond W89C840F device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') # ISA Ethernet NICs. pccard NICs included. device cs # Crystal Semiconductor CS89x0 NIC # 'device ed' requires 'device miibus' device ed # NE[12]000, SMC Ultra, 3c503, DS8390 cards device ex # Intel EtherExpress Pro/10 and Pro/10+ device ep # Etherlink III based cards device fe # Fujitsu MB8696x based cards device ie # EtherExpress 8/16, 3C507, StarLAN 10 etc. device lnc # NE2100, NE32-VL Lance Ethernet cards device sn # SMC's 9000 series of Ethernet chips device xe # Xircom pccard Ethernet # ISA devices that use the old ISA shims #device le # Wireless NIC cards device wlan # 802.11 support device an # Aironet 4500/4800 802.11 wireless NICs. device awi # BayStack 660 and others device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs. #device wl # Older non 802.11 Wavelan wireless NIC. # Pseudo devices. device loop # Network loopback device mem # Memory and kernel memory devices device io # I/O device device random # Entropy device device ether # Ethernet support device sl # Kernel SLIP device ppp # Kernel PPP device tun # Packet tunnel. device pty # Pseudo-ttys (telnet etc) device md # Memory "disks" device gif # IPv6 and IPv4 tunneling device faith # IPv6-to-IPv4 relaying (translation) # The `bpf' device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! device bpf # Berkeley packet filter # USB support device uhci # UHCI PCI->USB interface device ohci # OHCI PCI->USB interface device usb # USB Bus (required) #device udbp # USB Double Bulk Pipe devices device ugen # Generic device uhid # "Human Interface Devices" device ukbd # Keyboard device ulpt # Printer device umass # Disks/Mass storage - Requires scbus and da device ums # Mouse device urio # Diamond Rio 500 MP3 player device uscanner # Scanners # USB Ethernet, requires mii device aue # ADMtek USB Ethernet device axe # ASIX Electronics USB Ethernet device cue # CATC USB Ethernet device kue # Kawasaki LSI USB Ethernet device rue # RealTek RTL8150 USB Ethernet # FireWire support device firewire # FireWire bus code device sbp # SCSI over FireWire (Requires scbus and da) device fwe # Ethernet over FireWire (non-standard!) device atapicam device scbus device cd device passReceived on Mon Oct 04 2004 - 14:17:06 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:15 UTC