Hi, This is a me-too. The only other factor is that an interrupt storm is reported on the on-board vr0 and after that the SATA drive is not found. If I disable the vr0 in BIOS or boot sans apic, then no problem. atapci0: <VIA 6420 SATA150 controller> port 0xb000-0xb0ff,0xb400-0xb40f,0xb800-0xb803,0xd000-0xd007,0xd400-0xd403,0xd800-0xd807 at device 15.0 on pci 0 ... ad4: 238475MB <WDC WD2500JD-00GBB0/02.05D02> [484521/16/63] at ata2-master SATA150 when working. The board is an Asus A7V600-X and the drive is a Western digital WD2500. John On 8 Oct, Patrick M. Hausen wrote: > Hi! > > John Hay wrote: > >> > ata0-master: FAILURE - ATA_IDENTTIFY timed out >> > ata1-master: FAILURE - ATAPI_IDENTIFY timed out > >> Try disabling the apic. Break out of the loader by pressing '6' and then >> type: >> set hint.apic.0.disabled=1 >> boot > > Da, is workink now. > > Thankink, > Patrick -- -------------------------------------------------------------------------- John Harnett Ad Hoc Software john_at_adhoc.com.au Voice 0414 501948 40 Martin Rd Fax +61 3 9889 1074 Glen Iris Vic. Australia 3146 --------------------------------------------------------------------------Received on Fri Oct 08 2004 - 23:32:42 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:16 UTC