Am Montag, 11. Oktober 2004 10:39 schrieb Axel S. Gruner: > Hi. > > Christian Hiris schrieb am Monday, den 11. October 2004: > > > On Sun, Oct 10, 2004 at 03:22:28PM +0200, Christian Hiris wrote: > > > > # gmirror configure -v -b load mirror0 ad0 > > > > > > ^^^^^^^^^ > > > label? > > > > Yes, that should read "label" - sorry! > > I tried it with "label" in single user mode, but i do not get it work. > The error message is: "too few paramaters". > > > An example in 'man gmirror' describes how to set up a gmirror array on a > > disk with valid data. It uses 'gmirror lable' w/o extra labeling. I > > understand it the way that the term 'valid data' means 'existing > > (non-gmirror-)data on an already (before-gmirror-)labeled disk'. Maybe my > > understanding is wrong and you gave me the hint to the reason why my > > mirrors break on startup. I will do some testing on this. > > I also understand it that way. The problem is, or seems to be, "gmirror > label -v -b load mirror0 da0" does not work for me on a mounted device. You can set kern.geom.debugflags to 16. Then the command should succeed but no guarantee that you shoot yourself into the foot! -Harry > If i use another disk, da2 and da3, umount them, gmirror labeling will > work. > So, in my understanding, i have to boot from another bootable device, > and set up gmirror on da0 (where / is sitting an waiting to get > mirrored) and da1 while these devices are not mounted. > > Axel > _______________________________________________ > freebsd-current_at_freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-current > To unsubscribe, send any mail to "freebsd-current-unsubscribe_at_freebsd.org"
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:16 UTC