Re: ACPI Suspend -> /dev/ums0 dead

From: Jochen Gensch <incmc_at_gmx.de>
Date: Mon, 11 Oct 2004 16:39:25 +0200
ANISH MISTRY wrote:

> So your internal trackpoint is a usb mouse device and not psm?  What is your USB controller?  A dmesg would be helpful.

Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
         The Regents of the University of California. All rights reserved.
FreeBSD 5.3-BETA7 #0: Sun Oct  3 14:36:27 CEST 2004
     root_at_incmc.da-butze.uga:/usr/obj/usr/src/sys/KERNEL
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) III Mobile CPU      1200MHz (1198.98-MHz 
686-class CPU)
   Origin = "GenuineIntel"  Id = 0x6b1  Stepping = 1
 
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 402063360 (383 MB)
avail memory = 383721472 (365 MB)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <IBM TP-1E> on motherboard
acpi_ec0: <Embedded Controller: GPE 0x1c, ECDT> port 0x66,0x62 on acpi0
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU (3 Cx states)> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82830 host to AGP bridge> mem 0xd0000000-0xdfffffff at 
device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
acpi_video0: <ACPI video extension> port 0x3000-0x30ff mem 
0xc0100000-0xc010ffff,0xe0000000-0xe7ffffff irq 9 at device 0.0 on pci1
uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 
0x1800-0x181f irq 9 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1: Genesys Logic USB Hub, class 9/0, rev 1.01/0.11, addr 2
uhub1: 7 ports with 7 removable, self powered
uscanner0: Mustek Systems 1200 CU scanner, rev 1.00/1.00, addr 3
ums0: Logitech USB Receiver, rev 1.10/9.10, addr 4, iclass 3/1
ums0: 5 buttons and Z dir.
uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 
0x1820-0x183f irq 11 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port 
0x1840-0x185f irq 9 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
cbb0: <RF5C478 PCI-CardBus Bridge> mem 0x50000000-0x50000fff irq 9 at 
device 0.0 on pci2
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb1: <RF5C478 PCI-CardBus Bridge> mem 0x50100000-0x50100fff irq 5 at 
device 0.1 on pci2
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
fwohci0: <1394 Open Host Controller Interface> mem 0xc0201000-0xc02017ff 
irq 9 at device 0.2 on pci2
fwohci0: OHCI version 1.0 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:06:1b:02:01:00:60:ef
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:06:1b:00:60:ef
fwe0: Ethernet address: 02:06:1b:00:60:ef
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
fxp0: <Intel 82801CAM (ICH3) Pro/100 VE Ethernet> port 0x8000-0x803f mem 
0xc0200000-0xc0200fff irq 10 at device 8.0 on pci2
miibus0: <MII bus> on fxp0
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:d0:59:cb:ee:7b
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 UDMA100 controller> port 
0x1860-0x186f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pcm0: <Intel ICH3 (82801CA)> port 0x18c0-0x18ff,0x1c00-0x1cff irq 5 at 
device 31.5 on pci0
pcm0: [GIANT-LOCKED]
pcm0: <Cirrus Logic CS4299 AC97 Codec>
pci0: <simple comms> at device 31.6 (no driver attached)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
fdc0: <floppy drive controller (FDE)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 
on acpi0
fdc0: [FAST]
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
ppc0 port 0x278-0x27f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
ppbus0: IEEE1284 device found /NIBBLE/PS2/ECP
Probing for PnP devices on ppbus0:
ppbus0: <Lexmark International Lexmark Optra S 1855> PRINTER PCL 6 
Emulation, PostScript Level 2 Emulation, NPAP, PJL
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio1 port 0x2f8-0x2ff irq 3 drq 3 on acpi0
sio1: type 16550A
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
orm0: <ISA Option ROMs> at iomem 
0xdc000-0xdffff,0xd1000-0xd1fff,0xd0000-0xd0fff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1198984946 Hz quality 800
Timecounters tick every 10.000 msec
ad0: 57231MB <HTS548060M9AT00/MGBOA5BA> [116280/16/63] at ata0-master 
UDMA100
ndis0: <3Com 3CRSHPW_96 Wireless LAN PC Card> at port 0x4000-0x401f irq 
9 function 0 config 1 on pccard0
ndis0: NDIS API version: 5.0
ndis0: Ethernet address: 00:04:75:cc:07:0e
ndis0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 5.5Mbps 11Mbps
ata1-slave: FAILURE - ATAPI_IDENTIFY timed out
ata1-slave: FAILURE - ATAPI_IDENTIFY timed out
ata1-slave: FAILURE - ATAPI_IDENTIFY timed out
acd0: CDRW <UJDA720 DVD/CDRW/1.03> at ata1-master UDMA33
cd0 at ata1 bus 0 target 0 lun 0
cd0: <MATSHITA UJDA720 DVD/CDRW 1.03> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present 
- tray closed
Mounting root from ufs:/dev/ad0s3a


Jochen
Received on Mon Oct 11 2004 - 12:39:31 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:16 UTC