Updated my RELENG_5 machines today and one of them did not survive the reboot. When the loader tries to load the kernel, the machine instantly reboots. I thought it might be due to using CPUTYPE?=athlon-xp in /etc/make.conf, but it still happens on a kernel compiled with CPUTYPE commented out. I also tried versions of the loader compiled with and without CPUTYPE; both loaders were able to successfully load a kernel from 3 days ago but neither of them succeeded with various kernels compiled today. This machine has an Asus A7N266 motherboard and an Athlon XP 1800 processor. For a while now it has needed ACPI disabled as it will instantly reboot with ACPI enabled. I was using the latest BIOS (1004) but updated the latest beta (1005.005) after this started happening. The beta doesn't appear to change anything that I can tell. The machine also recently developed the annoying habit of not coming back up after a reboot. I have to go power cycle it or press reset. This is similar to behavior I've seen on motherboards with dying capacitors, but the difference here is that it *always* succeeds when I manually power it up/reset it. Machines with dying capacitors would sometimes fail at that time too. Jon $ dmesg Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.3-BETA7 #4: Tue Oct 12 14:36:37 CDT 2004 root_at_proxy.concordiacrusaders.org:/usr/obj/usr/src/sys/PROXY Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Athlon(TM) XP 1800+ (1536.83-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x662 Stepping = 2 Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> AMD Features=0xc0400000<AMIE,DSP,3DNow!> real memory = 1065271296 (1015 MB) avail memory = 1036959744 (988 MB) npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> pcibus 0 on motherboard pir0: <PCI Interrupt Routing Table: 14 Entries> on motherboard pci0: <PCI bus> on pcib0 $PIR: No matching entry for 0.1.INTA agp0: <NVIDIA nForce AGP Controller> mem 0xf8000000-0xfbffffff at device 0.0 on pci0 pci0: <memory, RAM> at device 0.1 (no driver attached) pci0: <memory, RAM> at device 0.2 (no driver attached) pci0: <memory, RAM> at device 0.3 (no driver attached) isab0: <PCI-ISA bridge> at device 1.0 on pci0 isa0: <ISA bus> on isab0 pci0: <serial bus, SMBus> at device 1.1 (no driver attached) pcib1: <PCIBIOS PCI-PCI bridge> at device 8.0 on pci0 pci1: <PCI bus> on pcib1 $PIR: No matching entry for 1.10.INTA ahc0: <Adaptec 29160N Ultra160 SCSI adapter> port 0xc800-0xc8ff mem 0xe5000000-0xe5000fff irq 7 at device 8.0 on pci1 ahc0: [GIANT-LOCKED] aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs fxp0: <Intel 82550 Pro/100 Ethernet> port 0xc400-0xc43f mem 0xe4000000-0xe401ffff,0xe4800000-0xe4800fff irq 5 at device 10.0 on pci1 miibus0: <MII bus> on fxp0 inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: Ethernet address: 00:02:b3:28:44:a0 atapci0: <nVidia nForce UDMA100 controller> port 0xb800-0xb80f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 9.0 on pci0 ata0: channel #0 on atapci0 ata1: channel #1 on atapci0 pcib2: <PCIBIOS PCI-PCI bridge> at device 30.0 on pci0 pci2: <PCI bus> on pcib2 pci2: <display, VGA> at device 0.0 (no driver attached) cpu0 on motherboard orm0: <ISA Option ROM> at iomem 0xd8000-0xd97ff on isa0 pmtimer0 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model IntelliMouse, device ID 3 fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5 irq 6 drq 2 on isa0 fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 unknown: <PNP0501> can't assign resources (port) unknown: <PNP0700> can't assign resources (port) unknown: <PNP0f13> can't assign resources (irq) ahc1: No resources allocated. ahc1: No resources allocated. unknown: <PNP0303> can't assign resources (port) unknown: <PNP0c02> can't assign resources (port) Timecounter "TSC" frequency 1536825688 Hz quality 800 Timecounters tick every 1.000 msec ad0: 78533MB <IC35L080AVVA07-0/VA4OA50K> [159560/16/63] at ata0-master UDMA100 acd0: DVDROM <LITEON DVD-ROM LTD163D/GHR3> at ata1-master UDMA33 Waiting 15 seconds for SCSI devices to settle da0 at ahc0 bus 0 target 0 lun 0 da0: <QUANTUM ATLAS V 9 SCA 0201> Fixed Direct Access SCSI-3 device da0: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled da0: 8683MB (17783249 512 byte sectors: 255H 63S/T 1106C) da1 at ahc0 bus 0 target 1 lun 0 da1: <QUANTUM ATLAS V 9 SCA 0201> Fixed Direct Access SCSI-3 device da1: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled da1: 8683MB (17783249 512 byte sectors: 255H 63S/T 1106C) Mounting root from ufs:/dev/ad0s1aReceived on Fri Oct 15 2004 - 19:53:52 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:17 UTC