Re:

From: Nicolás de Bari Embríz G. R. <nbari_at_unixmexico.com>
Date: Mon, 18 Oct 2004 22:34:18 -0500 (CDT)
Hi it didn't help the system still crashing.

regards.


> On Oct 16, "Nicolas de Bari" wrote:
>
> Try adding this to your /boot/loader.conf:
>
> machdep.disable_mtrrs="1"
>
> Please reply to the list and let us know if it helps.
>
> Thanks,
>
> Mike
>
>> Hi list.
>>
>> I am having strange problems with FreeBSD 5.X.
>>
>> my system:
>>
>> dell latidud D800.
>> pentium M 1.7ghz.
>> BIOS A11.
>> WUXGA nvidia GeForce FX 5200 32M.
>>
>> The problem:
>>
>> Using FreeBSD 5.2.1 or FreeBSD 5.3 BETA 7 with Xorg or XFree86 if y type
>> any of the following commands :
>>
>> X -xf86config /root/xorg.conf.new
>> XFree86 -xf86config /root/XF86Config.new
>> startx or xdm
>>
>> My system crash and i can't do nothing, the X is never up, the screan
>> just shows few lines like :
>> (this only happends with nvidia driver not with the nv)
>>
>> Release Date: 18 December 2003
>> X Protocol Version 11, Revision 0, Release 6.7
>> Build Operating System: FreeBSD 5.3 i386 [ELF]
>> Current Operating System: FreeBSD laptop.unixmexico.net 5.3-BETA7
>> FreeBSD 5.3-BETA7 #1: Fri Oct 15 09:44:03 CDT 2004
>> root_at_laptop.unixmexico.net:/usr/obj/usr/src/sys/D800 i386
>> Build Date: 02 October 2004
>>     Before reporting problems, check http://wiki.X.Org
>>     to make sure that you have the latest version.
>> Module Loader present
>> Markers: (--) probed, (**) from config file, (==) default setting,
>>     (++) from command line, (!!) notice, (II) informational,
>>     (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
>> (==) Log file: "/var/log/Xorg.0.log", Time: Fri Oct 15 10:30:18 2004
>>
>>
>> ctrl+sup, ctrl+c, nothing responds also i have try to "shutdown -r 5
>> min" and then try to start the X but the system just crash and never
>> reboots, I need to press the poweroff button thats the only thing that
>> work.
>>
>> When using FreeBSD 4.10 the driver works perfectly with out problems,
>> but i would like to use FreeBSD 5.X because of my wirless card. the one
>> works great with the ndis method.
>>
>> On FreeBSD 5.X I have tryed with using a kernel with and without device
>> agp, and installed the nvidia-drivers from the ports with a simple "make
>> install clean".
>>
>> a dmesg on a FreeBSD 5.3 looks like (without device agp):
>> ---
>> Copyright (c) 1992-2004 The FreeBSD Project.
>> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>>         The Regents of the University of California. All rights
>> reserved.
>> FreeBSD 5.3-BETA7 #1: Fri Oct 15 09:44:03 CDT 2004
>>     root_at_laptop.unixmexico.net:/usr/obj/usr/src/sys/D800
>> Timecounter "i8254" frequency 1193182 Hz quality 0
>> CPU: Intel(R) Pentium(R) M processor 1.70GHz (1698.56-MHz 686-class CPU)
>>   Origin = "GenuineIntel"  Id = 0x6d6  Stepping = 6
>>
>> Features=0xafe9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
>> real memory  = 536535040 (511 MB)
>> avail memory = 511172608 (487 MB)
>> npx0: [FAST]
>> npx0: <math processor> on motherboard
>> npx0: INT 16 interface
>> acpi0: <DELL CPi R  > on motherboard
>> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
>> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
>> cpu0: <ACPI CPU (4 Cx states)> on acpi0
>> acpi_tz0: <Thermal Zone> on acpi0
>> acpi_acad0: <AC Adapter> on acpi0
>> acpi_cmbat0: <Control Method Battery> on acpi0
>> acpi_cmbat1: <Control Method Battery> on acpi0
>> acpi_lid0: <Control Method Lid Switch> on acpi0
>> acpi_button0: <Power Button> on acpi0
>> acpi_button1: <Sleep Button> on acpi0
>> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
>> ACPI link \\_SB_.PCI0.LNKB has invalid initial irq 11, ignoring
>> pci0: <ACPI PCI bus> on pcib0
>> pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
>> pci1: <ACPI PCI bus> on pcib1
>> nvidia0: <GeForce FX Go5200> mem
>> 0xd0000000-0xdfffffff,0xfc000000-0xfcffffff irq 11 at device 0.0 on pci1
>> nvidia0: [GIANT-LOCKED]
>> uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xbf80-0xbf9f
>> irq 11 at device 29.0 on pci0
>> uhci0: [GIANT-LOCKED]
>> usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
>> usb0: USB revision 1.0
>> uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
>> uhub0: 2 ports with 2 removable, self powered
>> uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xbf40-0xbf5f
>> irq 11 at device 29.1 on pci0
>> uhci1: [GIANT-LOCKED]
>> usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
>> usb1: USB revision 1.0
>> uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
>> uhub1: 2 ports with 2 removable, self powered
>> uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xbf20-0xbf3f
>> irq 11 at device 29.2 on pci0
>> uhci2: [GIANT-LOCKED]
>> usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
>> usb2: USB revision 1.0
>> uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
>> uhub2: 2 ports with 2 removable, self powered
>> pci0: <serial bus, USB> at device 29.7 (no driver attached)
>> pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
>> pci2: <ACPI PCI bus> on pcib2
>> bge0: <Broadcom BCM5705M Gigabit Ethernet, ASIC rev. 0x3001> mem
>> 0xfaff0000-0xfaffffff irq 11 at device 0.0 on pci2
>> miibus0: <MII bus> on bge0
>> brgphy0: <BCM5705 10/100/1000baseTX PHY> on miibus0
>> brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
>> 1000baseTX-FDX, auto
>> bge0: Ethernet address: 00:0f:1f:25:d7:5e
>> cbb0: <PCI-CardBus Bridge> at device 1.0 on pci2
>> cardbus0: <CardBus bus> on cbb0
>> pccard0: <16-bit PCCard bus> on cbb0
>> cbb1: <PCI-CardBus Bridge> irq 11 at device 1.1 on pci2
>> cardbus1: <CardBus bus> on cbb1
>> pccard1: <16-bit PCCard bus> on cbb1
>> fwohci0: <1394 Open Host Controller Interface> mem
>> 0xfafe8000-0xfafebfff,0xfafef800-0xfafeffff irq 11 at device 1.2 on pci2
>> fwohci0: OHCI version 1.10 (ROM=0)
>> fwohci0: No. of Isochronous channels is 4.
>> fwohci0: EUI64 32:4f:c0:00:2a:92:dc:a1
>> fwohci0: Phy 1394a available S400, 2 ports.
>> fwohci0: Link S400, max_rec 2048 bytes.
>> firewire0: <IEEE1394(FireWire) bus> on fwohci0
>> fwe0: <Ethernet over FireWire> on firewire0
>> if_fwe0: Fake Ethernet address: 32:4f:c0:92:dc:a1
>> fwe0: Ethernet address: 32:4f:c0:92:dc:a1
>> fwe0: if_start running deferred for Giant
>> sbp0: <SBP-2/SCSI over FireWire> on firewire0
>> fwohci0: Initiate bus reset
>> fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
>> firewire0: 1 nodes, maxhop <= 0, cable IRM =  (me)
>> firewire0: bus manager  (me)
>> pci2: <base peripheral> at device 1.3 (no driver attached)
>> pci2: <network> at device 3.0 (no driver attached)
>> isab0: <PCI-ISA bridge> at device 31.0 on pci0
>> isa0: <ISA bus> on isab0
>> atapci0: <Intel ICH4 UDMA100 controller> port
>> 0xbfa0-0xbfaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
>> ata0: channel #0 on atapci0
>> ata1: channel #1 on atapci0
>> pcm0: <Intel ICH4 (82801DB)> port 0xbc40-0xbc7f,0xb800-0xb8ff mem
>> 0xf4fff400-0xf4fff4ff,0xf4fff800-0xf4fff9ff irq 5 at device
>>  31.5 on pci0
>> pcm0: [GIANT-LOCKED]
>> pcm0: <SigmaTel STAC9750/51 AC97 Codec>
>> pci0: <simple comms> at device 31.6 (no driver attached)
>> atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
>> atkbd0: <AT Keyboard> irq 1 on atkbdc0
>> kbd0 at atkbd0
>> atkbd0: [GIANT-LOCKED]
>> psm0: <PS/2 Mouse> irq 12 on atkbdc0
>> psm0: [GIANT-LOCKED]
>> psm0: model GlidePoint, device ID 0
>> sio0 port 0x3f8-0x3ff irq 4 on acpi0
>> sio0: type 16550A
>> ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 1 on acpi0
>> ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
>> ppc0: FIFO with 16/16/8 bytes threshold
>> ppbus0: <Parallel port bus> on ppc0
>> plip0: <PLIP network interface> on ppbus0
>> lpt0: <Printer> on ppbus0
>> lpt0: Interrupt-driven port
>> ppi0: <Parallel I/O> on ppbus0
>> orm0: <ISA Option ROMs> at iomem 0xcf800-0xcffff,0xc0000-0xcf7ff on isa0
>> pmtimer0 on isa0
>> sc0: <System console> at flags 0x100 on isa0
>> sc0: VGA <16 virtual consoles, flags=0x300>
>> sio1: configured irq 3 not in bitmap of probed irqs 0
>> sio1: port may not be enabled
>> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
>> isa0
>> Timecounter "TSC" frequency 1698563602 Hz quality 800
>> Timecounters tick every 10.000 msec
>> IP Filter: v3.4.35 initialized.  Default = block all, Logging = enabled
>> acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
>> cpu0: Performance states changed
>> ad0: 76319MB <HTS548080M9AT00/MG4OA53A> [155061/16/63] at ata0-master
>> UDMA100
>> acd0: CDRW <SONY CD-RW/DVD-ROM CRX830E/KDK3> at ata1-master UDMA33
>> wi0: <SMC SMC2632W> at port 0xd000-0xd03f irq 11 function  config 1 on
>> pccard0
>> wi0: using RF:PRISM2 MAC:HFA3841 CARD:HWB3163 rev.A
>> wi0: Intersil Firmware: Primary (0.3.0), Station (0.7.6)
>> wi0: Ethernet address: 00:04:e2:1e:0d:2e
>> wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
>> cd0 at ata1 bus  target  lun 0
>> cd0: <SONY CDRW/DVD CRX830E KDK3> Removable CD-ROM SCSI-0 device
>> cd0: 33.000MB/s transfers
>> cd0: cd present [332722 x 2048 byte records]
>> Mounting root from ufs:/dev/ad0s2a
>> ---
>>
>> # sysctl -a hw.nvidia.registry
>> hw.nvidia.registry.EnableVia4x: 0
>> hw.nvidia.registry.EnableALiAGP: 0
>> hw.nvidia.registry.NvAGP: 1
>> hw.nvidia.registry.EnableAGPSBA: 0
>> hw.nvidia.registry.EnableAGPFW: 0
>> hw.nvidia.registry.SoftEDIDs: 1
>> hw.nvidia.registry.Mobile: 4294967295
>> hw.nvidia.registry.ResmanDebugLevel: 4294967295
>> hw.nvidia.registry.FlatPanelMode: 0
>>
>> on the /boot/loder.conf i have something like this:
>> snd_ich_load="YES"
>> linux_load="YES"
>> nvidia_load="YES"
>>
>> also i have try the options shown in here:
>> http://gerda.univie.ac.at/freebsd-laptops/index.pl?action=show_laptop_detail&laptop=255
>>
>> but always the system crash, for last i am attaching the actual kernel
>> that i am using:
>>
>> # kernel for laptop LATITUDE | D800
>> machine     i386
>> cpu         I686_CPU
>> ident       D800
>> # makeoptions   DEBUG=-g        #Build kernel with gdb(1) debug symbols
>>
>> options     SCHED_4BSD      #4BSD scheduler
>> options     INET            #InterNETworking
>> options     INET6           #IPv6 communications protocols
>> options     FFS         #Berkeley Fast Filesystem
>> options     SOFTUPDATES     #Enable FFS soft updates support
>> options     UFS_ACL         #Support for access control lists
>> options     UFS_DIRHASH     #Improve performance on big directories
>> options     MD_ROOT         #MD is a potential root device
>> options     NFSCLIENT       #Network Filesystem Client
>> options     NFSSERVER       #Network Filesystem Server
>> options     NFS_ROOT        #NFS usable as /, requires NFSCLIENT
>> options     MSDOSFS         #MSDOS Filesystem
>> options     CD9660          #ISO 9660 Filesystem
>> options     PROCFS          #Process filesystem (requires PSEUDOFS)
>> options     PSEUDOFS        #Pseudo-filesystem framework
>> options     GEOM_GPT        #GUID Partition Tables.
>> options     COMPAT_43       #Compatible with BSD 4.3 [KEEP THIS!]
>> options     COMPAT_FREEBSD4     #Compatible with FreeBSD4
>> options     SCSI_DELAY=15000    #Delay (in ms) before probing SCSI
>> options     KTRACE          #ktrace(1) support
>> options     SYSVSHM         #SYSV-style shared memory
>> options     SYSVMSG         #SYSV-style message queues
>> options     SYSVSEM         #SYSV-style semaphores
>> options     _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time
>> extensions
>> options     KBD_INSTALL_CDEV    # install a CDEV entry in /dev
>> options     AHC_REG_PRETTY_PRINT    # Print register bitfields in debug
>>                     # output.  Adds ~128k to driver.
>> options     AHD_REG_PRETTY_PRINT    # Print register bitfields in debug
>>                     # output.  Adds ~215k to driver.
>> options     ADAPTIVE_GIANT      # Giant mutex is adaptive.
>>
>> # Bus support.  Do not remove isa, even if you have no isa slots
>> device      isa
>> device      eisa
>> device      pci
>>
>> # Floppy drives
>> device      fdc
>>
>> # ATA and ATAPI devices
>> device      ata
>> device      atadisk         # ATA disk drives
>> device      ataraid         # ATA RAID drives
>> device      atapicd         # ATAPI CDROM drives
>> #device     atapifd         # ATAPI floppy drives
>> #device     atapist         # ATAPI tape drives
>> options     ATA_STATIC_ID       #Static device numbering
>>
>> # SCSI peripherals
>> device      scbus       # SCSI bus (required for SCSI)
>> device      ch      # SCSI media changers
>> device      da      # Direct Access (disks)
>> device      sa      # Sequential Access (tape etc)
>> device      cd      # CD
>> device      pass        # Passthrough device (direct SCSI access)
>> device      ses     # SCSI Environmental Services (and SAF-TE)
>>
>> # atkbdc0 controls both the keyboard and the PS/2 mouse
>> device      atkbdc      # AT keyboard controller
>> device      atkbd       # AT keyboard
>> device      psm     # PS/2 mouse
>>
>> device      vga     # VGA video card driver
>>
>> device      splash      # Splash screen and screen saver support
>> # syscons is the default console driver, resembling an SCO console
>> device      sc
>>
>> # Enable this for the pcvt (VT220 compatible) console driver
>> #device     vt
>> #options    XSERVER         # support for X server on a vt console
>> #options    FAT_CURSOR      # start with block cursor
>>
>> # device        agp     # support several AGP chipsets
>>
>> # Floating point support - do not disable.
>> device      npx
>>
>> # Power management support (see NOTES for more options)
>> # device        apm
>> # Add suspend/resume support for the i8254.
>> device      pmtimer
>>
>> # PCCARD (PCMCIA) support
>> # Pcmcia and cardbus bridge support
>> device      cbb         # cardbus (yenta) bridge
>> #device     pcic            # ExCA ISA and PCI bridges
>> device      pccard          # PC Card (16-bit) bus
>> device      cardbus         # CardBus (32-bit) bus
>>
>> # Serial (COM) ports
>> device      sio     # 8250, 16[45]50 based serial ports
>>
>> # Parallel port
>> device      ppc
>> device      ppbus       # Parallel port bus (required)
>> device      lpt     # Printer
>> device      plip        # TCP/IP over parallel
>> device      ppi     # Parallel port interface device
>> #device     vpo     # Requires scbus and da
>>
>> # If you've got a "dumb" serial or parallel PCI card that is
>> # supported by the puc(4) glue driver, uncomment the following
>> # line to enable it (connects to the sio and/or ppc drivers):
>> #device         puc
>>
>> # PCI Ethernet NICs that use the common MII bus controller code.
>> # NOTE: Be sure to keep the 'device miibus' line in order to use these
>> NICs!
>> device      miibus      # MII bus support
>> device      bge     # Broadcom BCM570xx Gigabit Ethernet
>>
>> # Wireless NIC cards
>> device      wlan        # 802.11 support
>> device      an      # Aironet 4500/4800 802.11 wireless NICs.
>> device      awi     # BayStack 660 and others
>> device      wi      # WaveLAN/Intersil/Symbol 802.11 wireless NICs.
>>
>> # Pseudo devices - the number indicates how many units to allocate.
>> device      loop        # Network loopback
>> device      mem     # Memory and kernel memory devices
>> device      io      # I/O device
>> device      random  # Entropy device
>> device      ether   # Ethernet support
>> device      sl      # Kernel SLIP
>> device      ppp     # Kernel PPP
>> device      tun     # Packet tunnel.
>> device      pty     # Pseudo-ttys (telnet etc)
>> device      md      # Memory "disks"
>> device      gif     # IPv6 and IPv4 tunneling
>> device      faith   # IPv6-to-IPv4 relaying (translation)
>> device      snp
>> # The `bpf' device enables the Berkeley Packet Filter.
>> # Be aware of the administrative consequences of enabling this!
>> device      bpf     # Berkeley packet filter
>>
>> # USB support
>> device      uhci        # UHCI PCI->USB interface
>> device      ohci        # OHCI PCI->USB interface
>> device      usb     # USB Bus (required)
>> #device     udbp        # USB Double Bulk Pipe devices
>> device      ugen        # Generic
>> device      uhid        # "Human Interface Devices"
>> device      ukbd        # Keyboard
>> device      ulpt        # Printer
>> device      umass
> # Disks/Mass storage - Requires scbus and da
>> device      ums     # Mouse
>> device      uscanner    # Scanners
>> device      urio        # Diamond Rio 500 MP3 player
>>
>> # FireWire support
>> device      firewire    # FireWire bus code
>> device      sbp     # SCSI over FireWire (Requires scbus and da)
>> device      fwe     # Ethernet over FireWire (non-standard!)
>>
>> # video
>> options     SC_PIXEL_MODE
>> options     VGA_WIDTH90
>> options     VESA
>>
>> # ipfilter
>> options     IPFILTER
>> options     IPFILTER_LOG
>> options     IPFILTER_DEFAULT_BLOCK
>> options     IPSTEALTH
>>
>> # Using the ATAPI/CAM Driver CDBurner
>> device atapicam
>>
>>
>> Any ideas of what could it be wrong or what do i need to make the nvidia
>> drivers to work?
>>
>> thanks in advance.
>>
>>
>>
>> _______________________________________________
>> freebsd-current_at_freebsd.org mailing list
>> http://lists.freebsd.org/mailman/listinfo/freebsd-current
>> To unsubscribe, send any mail to
>> "freebsd-current-unsubscribe_at_freebsd.org"
>

-- 
nbari_at_unixmexico.com
key ID 1EF56FDC
Received on Tue Oct 19 2004 - 01:34:22 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:18 UTC