Hi, I've upgraded my freebsd 5.2.0 Release to 5.2.1-p11.FreeBSD I use Acard AEC-6880 PCI ATA/133 IDE RAID (Acard UDMA133 Controller) drive on my PII 733 Bi-pro (MSI 690 motherboard) I used 2 master drive for my array RAID1 : GEOM: create disk ad8 dp=0xc6abe760 ad8: 39205MB <Maxtor 6E040L0> [79656/16/63] at ata4-master UDMA133 GEOM: create disk ad10 dp=0xc6b4ba60 ad10: 39205MB <Maxtor 6E040L0> [79656/16/63] at ata5-master UDMA133 I've made my array RAID1 in bios mode and also with atacontrol # atacontrol create RAID1 ad8 ad10 That's created ar0 device. I created one slice on device ar0 --> /dev/ar0s1 I mounted it. # mount -t ufs /dev/ar0s1 /usr/local/w3 # cd /usr/local/w3 # mkdir bsd --> ok # tar zxvf data.tar.gz (1,1Mo --> 6,6Mo untared) And my array down in degraded mode, I lose my drive ad8 with this dmesg output ar0: 39205MB <ATA RAID1 array> [4998/255/63] status: DEGRADED subdisks: ad8 : WARNING no status, reselecting device. ad8 : error issuing command=ca ad8 : error issuing DMA command Does anyone else have the same problem with Acard IDE RAID Controler. It worked fine under Freebsd 5.2.0 ReleaseReceived on Tue Oct 19 2004 - 22:23:57 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:18 UTC