Dmesg Dual AMD64 with 4GB RAM (IBM _at_server 325, ServeRAID 6M)

From: Ganbold <ganbold_at_micom.mng.net>
Date: Fri, 22 Oct 2004 12:45:57 +0900
Hi,

My dmesg at 4GB of RAM on IBM _at_server 325 ServeRAID 6M dual AMD64 after

Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
         The Regents of the University of California. All rights reserved.
FreeBSD 5.3-RC1 #1: Fri Oct 22 12:17:38 ULAT 2004
     root_at_amd.micom.mng.net:/usr/obj/usr/src/sys/AMD
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Opteron(tm) Processor 248 (2193.18-MHz K8-class CPU)
   Origin = "AuthenticAMD"  Id = 0xf58  Stepping = 8
   Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
   AMD Features=0xe0500800<SYSCALL,NX,MMX+,LM,3DNow+,3DNow>
real memory  = 4227268608 (4031 MB)
avail memory = 4083044352 (3893 MB)
ACPI APIC Table: <PTLTD          APIC  >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
  cpu0 (BSP): APIC ID:  0
  cpu1 (AP): APIC ID:  1
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 1.1> irqs 0-23 on motherboard
ioapic1 <Version 1.1> irqs 24-27 on motherboard
ioapic2 <Version 1.1> irqs 28-31 on motherboard
acpi0: <PTLTD    XSDT> on motherboard
acpi0: Power Button (fixed)
unknown: I/O range not supported
unknown: I/O range not supported
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0x8080-0x80ff,0x8000-0x807f,0xcf8-0xcff 
iomem 0xd8000-0xdbfff on acpi0
pcib0: could not get PCI interrupt routing table for \\_SB_.PCI0 - AE_NOT_FOUND
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci1: <ACPI PCI bus> on pcib1
ohci0: <OHCI (generic) USB controller> mem 0xfc100000-0xfc100fff irq 19 at 
device 0.0 on pci1
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xfc101000-0xfc101fff irq 19 at 
device 0.1 on pci1
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ukbd0: Silitek IBM USB Keyboard, rev 1.10/1.00, addr 2, iclass 3/1
kbd1 at ukbd0
uhid0: Silitek IBM USB Keyboard, rev 1.10/1.00, addr 2, iclass 3/1
pci1: <display, VGA> at device 5.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <AMD 8111 UDMA133 controller> port 
0x1020-0x102f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 10.0 on pci0
pci2: <ACPI PCI bus> on pcib2
bge0: <Broadcom BCM5704C Dual Gigabit Ethernet, ASIC rev. 0x2003> mem 
0xfe000000-0xfe00ffff,0xfe010000-0xfe01ffff irq 24 at de
vice 1.0 on pci2
miibus0: <MII bus> on bge0
brgphy0: <BCM5704 10/100/1000baseTX PHY> on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 
1000baseTX-FDX, auto
bge0: Ethernet address: 00:0d:60:14:cc:9e
bge1: <Broadcom BCM5704C Dual Gigabit Ethernet, ASIC rev. 0x2003> mem 
0xfe020000-0xfe02ffff,0xfe030000-0xfe03ffff irq 25 at de
vice 1.1 on pci2
miibus1: <MII bus> on bge1
brgphy1: <BCM5704 10/100/1000baseTX PHY> on miibus1
brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 
1000baseTX-FDX, auto
bge1: Ethernet address: 00:0d:60:14:cc:9f
pci2: <mass storage, SCSI> at device 2.0 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 10.1 (no driver 
attached)
pcib3: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <PCI-PCI bridge> at device 3.0 on pci3
pci4: <PCI bus> on pcib4
ips0: <Adaptec ServeRAID Adapter> mem 0xfe100000-0xfe100fff irq 28 at 
device 8.0 on pci4
ips0: [GIANT-LOCKED]
pci0: <base peripheral, interrupt controller> at device 11.1 (no driver 
attached)
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
orm0: <ISA Option ROMs> at iomem 
0xcb000-0xcb7ff,0xc9800-0xcafff,0xc8000-0xc97ff,0xc0000-0xc7fff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
device_attach: atkbd0 attach returned 6
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 0.976 msec
acd0: CDROM <LG CD-ROM CRN-8245B/1.16> at ata1-master UDMA33
ips0: adapter type: ServeRAID 6M (marco)
ips0: logical drives: 1
ips0: Logical Drive 0: RAID5 sectors: 355481600, state OK
ipsd0: <Logical Drive> on ips0
ipsd0: Logical Drive  (173575MB)
SMP: AP CPU #1 Launched!
Mounting root from ufs:/dev/ipsd0s1a


Ganbold
Received on Fri Oct 22 2004 - 02:46:17 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:19 UTC