On Mon, Oct 25, 2004 at 03:48:28PM -0700, I wrote: > > I tried to install 5.3-RC1 yesterday and this time (the first time since > 5.1) it booted correctly. The kernel paused for more than 100 seconds > shortly after starting the second HTT cpu and just before mounting root. > The problem still exists after building and tuning a custom kernel. > Is this known behavior? > On Mon, 25 Oct 2004 16:07:18 -0700, Kris Kennaway responded: > > Try boot -v and post more information. > This is the output from dmesg just after "boot -v". I have indicated where the kernel paused, just after this line in the output: ioapic0: routing intpin 22 (PCI IRQ 22) to cluster 0 Dan Strick strick_at_covad.net ------------------------------------------------------------------------ intpin=a, irq=16 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 3, range 32, base e8000000, size 27, enabled pcib1: device (null) requested decoded memory range 0xe8000000-0xefffffff map[14]: type 1, range 32, base f1010000, size 16, enabled pcib1: device (null) requested decoded memory range 0xf1010000-0xf101ffff found-> vendor=0x1002, dev=0x4e65, revid=0x00 bus=1, slot=0, func=1 class=03-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0087, statreg=0x02b0, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D1 D2 D3 current D0 pci1: <display, VGA> at device 0.0 (no driver attached) pci1: <display> at device 0.1 (no driver attached) pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0x9000-0x9fff pcib2: memory decode 0xf6000000-0xf60fffff pcib2: prefetched decode 0xfff00000-0xfffff pcib2: could not get PCI interrupt routing table for \\_SB_.PCI0.CSAB - AE_NOT_FOUND pci2: <ACPI PCI bus> on pcib2 pci2: physical bus=2 map[10]: type 1, range 32, base f6000000, size 17, enabled pcib2: device (null) requested decoded memory range 0xf6000000-0xf601ffff map[18]: type 4, range 32, base 00009000, size 5, enabled pcib2: device (null) requested decoded I/O range 0x9000-0x901f pcib0: matched entry for 0.3.INTB pcib0: slot 3 INTB hardwired to IRQ 18 pcib2: slot 1 INTA is routed to irq 18 found-> vendor=0x8086, dev=0x1019, revid=0x00 bus=2, slot=1, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0238, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns) intpin=a, irq=18 powerspec 2 supports D0 D3 current D0 em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port 0x9000-0x901f mem 0xf6000000-0xf601ffff irq 18 at device 1.0 on pci2 em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xf6000000 em0: Reserved 0x20 bytes for rid 0x18 type 4 at 0x9000 em0: [MPSAFE] em0: bpf attached em0: Ethernet address: 00:20:ed:78:c7:71 em0: Speed:N/A Duplex:N/A uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xbc00-0xbc1f irq 16 at device 29.0 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xbc00 uhci0: [GIANT-LOCKED] usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xb000-0xb01f irq 19 at device 29.1 on pci0 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xb000 uhci1: [GIANT-LOCKED] usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xb400-0xb41f irq 18 at device 29.2 on pci0 uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xb400 uhci2: [GIANT-LOCKED] usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xb800-0xb81f irq 16 at device 29.3 on pci0 uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0xb800 uhci3: [GIANT-LOCKED] usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3 usb3: USB revision 1.0 uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered pci0: <serial bus, USB> at device 29.7 (no driver attached) pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pcib3: secondary bus 3 pcib3: subordinate bus 4 pcib3: I/O decode 0x7000-0x8fff pcib3: memory decode 0xf2000000-0xf5ffffff pcib3: prefetched decode 0xfff00000-0xfffff pcib3: Subtractively decoded bridge. ACPI PCI link initial configuration: pci3: <ACPI PCI bus> on pcib3 pci3: physical bus=3 map[10]: type 4, range 32, base 00008000, size 8, enabled pcib3: device (null) requested decoded I/O range 0x8000-0x80ff map[14]: type 1, range 32, base f5005000, size 12, enabled pcib3: device (null) requested decoded memory range 0xf5005000-0xf5005fff pcib3: matched entry for 3.1.INTA pcib3: slot 1 INTA hardwired to IRQ 21 found-> vendor=0x9004, dev=0x8178, revid=0x01 bus=3, slot=1, func=0 class=01-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x08 (2000 ns) intpin=a, irq=21 powerspec 1 supports D0 D3 current D0 found-> vendor=0x1011, dev=0x0001, revid=0x02 bus=3, slot=2, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0280, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns) map[10]: type 1, range 32, base f5004000, size 11, enabled pcib3: device (null) requested decoded memory range 0xf5004000-0xf50047ff map[14]: type 1, range 32, base f5000000, size 14, enabled pcib3: device (null) requested decoded memory range 0xf5000000-0xf5003fff pcib3: matched entry for 3.10.INTA pcib3: slot 10 INTA hardwired to IRQ 22 found-> vendor=0x104c, dev=0x8024, revid=0x00 bus=3, slot=10, func=0 class=0c-00-10, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns) intpin=a, irq=22 powerspec 2 supports D0 D1 D2 D3 current D0 ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0x8000-0x80ff mem 0xf5005000-0xf5005fff irq 21 at device 1.0 on pci3 ahc0: Defaulting to MEMIO off ahc0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x8000 ahc0: Reading SEEPROM...done. ahc0: internal 50 cable not present, internal 68 cable not present ahc0: external cable not present ahc0: BIOS eeprom is present ahc0: High byte termination Enabled ahc0: Low byte termination Enabled ahc0: Downloading Sequencer Program... 441 instructions downloaded ahc0: Features 0x10005, Bugs 0x11, Flags 0x28485540 ahc0: [GIANT-LOCKED] aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs pcib4: <PCI-PCI bridge> at device 2.0 on pci3 pcib4: secondary bus 4 pcib4: subordinate bus 4 pcib4: I/O decode 0x7000-0x7fff pcib4: memory decode 0xf3000000-0xf4ffffff pcib4: prefetched decode 0xfff00000-0xfffff pci4: <PCI bus> on pcib4 pci4: physical bus=4 map[10]: type 4, range 32, base 00007000, size 8, enabled pcib4: device (null) requested decoded I/O range 0x7000-0x70ff pcib3: device (null) requested decoded I/O range 0x7000-0x70ff map[14]: type 1, range 32, base f4000000, size 12, enabled pcib4: device (null) requested decoded memory range 0xf4000000-0xf4000fff pcib3: device (null) requested decoded memory range 0xf4000000-0xf4000fff pcib3: matched entry for 3.2.INTA pcib3: slot 2 INTA hardwired to IRQ 22 pcib4: slot 4 INTA is routed to irq 22 found-> vendor=0x9004, dev=0x7278, revid=0x03 bus=4, slot=4, func=0 class=01-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0280, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x08 (2000 ns) intpin=a, irq=22 map[10]: type 4, range 32, base 00007400, size 8, enabled pcib4: device (null) requested decoded I/O range 0x7400-0x74ff pcib3: device (null) requested decoded I/O range 0x7400-0x74ff map[14]: type 1, range 32, base f4001000, size 12, enabled pcib4: device (null) requested decoded memory range 0xf4001000-0xf4001fff pcib3: device (null) requested decoded memory range 0xf4001000-0xf4001fff pcib3: matched entry for 3.2.INTB pcib3: slot 2 INTB hardwired to IRQ 16 pcib4: slot 5 INTA is routed to irq 16 found-> vendor=0x9004, dev=0x7278, revid=0x03 bus=4, slot=5, func=0 class=01-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0280, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x08 (2000 ns) intpin=a, irq=16 ahc1: <Adaptec 3940 SCSI adapter> port 0x7000-0x70ff mem 0xf4000000-0xf4000fff irq 22 at device 4.0 on pci4 ahc1: Defaulting to MEMIO off ahc1: Reserved 0x100 bytes for rid 0x10 type 4 at 0x7000 ahc1: Reading SEEPROM...done. ahc1: Low byte termination Enabled ahc1: Downloading Sequencer Program... 439 instructions downloaded ahc1: Features 0x10000, Bugs 0x25, Flags 0x20481540 ahc1: [GIANT-LOCKED] aic7870: Single Channel A, SCSI Id=7, 16/253 SCBs ahc2: <Adaptec 3940 SCSI adapter> port 0x7400-0x74ff mem 0xf4001000-0xf4001fff irq 16 at device 5.0 on pci4 ahc2: Defaulting to MEMIO off ahc2: Reserved 0x100 bytes for rid 0x10 type 4 at 0x7400 ahc2: Reading SEEPROM...done. ahc2: Low byte termination Enabled ahc2: Downloading Sequencer Program... 439 instructions downloaded ahc2: Features 0x10000, Bugs 0x25, Flags 0x20481540 ahc2: [GIANT-LOCKED] aic7870: Single Channel B, SCSI Id=7, 16/253 SCBs fwohci0: <Texas Instruments TSB43AB23> mem 0xf5000000-0xf5003fff,0xf5004000-0xf50047ff irq 22 at device 10.0 on pci3 fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xf5004000 fwohci0: [MPSAFE] fwohci0: OHCI version 1.10 (ROM=1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:20:ed:0a:00:81:c1:33 fwohci0: Phy 1394a available S400, 3 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwohci0: Initiate bus reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH5 UDMA100 controller> port 0xf000-0xf00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xf000 ata0: channel #0 on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=50 ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata0-slave: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=50 stat1=50 devices=0x3<ATA_SLAVE,ATA_MASTER> ata0: [MPSAFE] ata1: channel #1 on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=50 ostat1=01 ata1-master: stat=0x10 err=0x01 lsb=0x14 msb=0xeb ata1-slave: stat=0x01 err=0x04 lsb=0x00 msb=0x00 ata1: reset tp2 stat0=10 stat1=01 devices=0x4<ATAPI_MASTER> ata1: [MPSAFE] atapci1: <Intel ICH5 SATA150 controller> port 0xd000-0xd00f,0xcc00-0xcc03,0xc800-0xc807,0xc400-0xc403,0xc000-0xc007 irq 18 at device 31.2 on pci0 atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xd000 atapci1: [MPSAFE] ata2: channel #0 on atapci1 atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0xc000 atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0xc400 ata2: reset tp1 mask=03 ostat0=80 ostat1=80 ata2-master: stat=0x80 err=0xff lsb=0xff msb=0xff ata2-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata2-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00 ata2: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata2: [MPSAFE] ata3: channel #1 on atapci1 atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0xc800 atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0xcc00 ata3: reset tp1 mask=03 ostat0=80 ostat1=80 ata3-master: stat=0x80 err=0xff lsb=0xff msb=0xff ata3-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata3-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00 ata3: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata3: [MPSAFE] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) pcm0: <Intel ICH5 (82801EB)> port 0xdc00-0xdc3f,0xd800-0xd8ff mem 0xf6102000-0xf61020ff,0xf6101000-0xf61011ff irq 17 at device 31.5 on pci0 pcm0: Reserved 0x200 bytes for rid 0x18 type 3 at 0xf6101000 pcm0: Reserved 0x100 bytes for rid 0x1c type 3 at 0xf6102000 pcm0: [GIANT-LOCKED] pcm0: <Avance Logic ALC655 AC97 Codec (id = 0x414c4760)> pcm0: Codec features 5 bit master volume, no 3D Stereo Enhancement pcm0: Primary codec extended features reserved 1, center DAC, surround DAC, LFE DAC, reserved 5 pcm0: sndbuf_setmap 3e859000, 4000; 0xecbdc000 -> 3e859000 pcm0: sndbuf_setmap 3e855000, 4000; 0xecbe0000 -> 3e855000 fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 fdc0: ic_type 90 part_id 80 fdc0: [MPSAFE] fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0: irq maps: 0xc801 0xc811 0xc801 0xc801 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio1: irq maps: 0xc801 0xc809 0xc801 0xc801 sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A unknown: not probed (disabled) ppc0: using extended I/O port range ppc0: SPP ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 unknown: not probed (disabled) psmcpnp0: <PS/2 mouse port> irq 12 on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 atkbd0: [GIANT-LOCKED] psm0: current command byte:0047 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0-00, 3 buttons psm0: config:00000000, flags:00000008, packet size:3 psm0: syncmask:c0, syncbits:00 unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it fdc: fdc0 already exists; skipping it ppc: ppc0 already exists; skipping it sio: sio0 already exists; skipping it sio: sio1 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it ahc_isa_probe 11: ioport 0xbc00 alloc failed ahc_isa_probe 12: ioport 0xcc00 alloc failed ahc_isa_probe 13: ioport 0xdc00 alloc failed isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <ISA Option ROMs> at iomem 0xd0000-0xd07ff,0xc0000-0xccfff on isa0 pmtimer0 on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. procfs registered Timecounter "TSC" frequency 2813538128 Hz quality -100 Timecounters tick every 10.000 msec lo0: bpf attached ata0-slave: pio=0x0c wdma=0x22 udma=0x46 cable=80pin ata0-master: pio=0x0c wdma=0x22 udma=0x46 cable=80pin ata0-master: setting PIO4 on Intel ICH5 chip ata0-master: setting UDMA100 on Intel ICH5 chip ata0-slave: setting PIO4 on Intel ICH5 chip ata0-slave: setting UDMA100 on Intel ICH5 chip ad0: <Maxtor 6Y080L0/YAR41BW0> ATA-7 disk at ata0-master ad0: 78166MB (160084415 sectors), 158813 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA100 ad1: <Maxtor 4R080L0/RAMC1TU0> ATA-7 disk at ata0-slave ad1: 78167MB (160086528 sectors), 158816 C, 16 H, 63 S, 512 B ad1: 16 secs/int, 1 depth queue, UDMA100 ata1-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin ata1-master: setting PIO4 on Intel ICH5 chip ata1-master: setting UDMA33 on Intel ICH5 chip acd0: <SAMSUNG CDRW/DVD SM-352B/T806> CDRW drive at ata1 as master acd0: read 173KB/s (8939KB/s) write 172KB/s (9039KB/s), 8192KB buffer, UDMA33 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet acd0: Writes: CDR, CDRW, test write, burnproof acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc em0: Link is up 100 Mbps Full Duplex ata2-master: pio=0x0c wdma=0x22 udma=0x46 cable=40pin ad4: <ST3120026AS/3.05> ATA-6 disk at ata2-master ad4: 114473MB (234441648 sectors), 232581 C, 16 H, 63 S, 512 B ad4: 16 secs/int, 1 depth queue, SATA150 ata3-master: pio=0x0c wdma=0x22 udma=0x46 cable=40pin ad6: <ST3120026AS/3.05> ATA-6 disk at ata3-master ad6: 114473MB (234441648 sectors), 232581 C, 16 H, 63 S, 512 B ad6: 16 secs/int, 1 depth queue, SATA150 Waiting 5 seconds for SCSI devices to settle (noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted. (noperiph:ahc1:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted. (noperiph:ahc2:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted. pcm0: measured ac97 link rate at 48019 Hz, will use 48000 Hz ahc0: Selection Timeout on A:0. 0 SCBs aborted ahc1: Selection Timeout on A:0. 0 SCBs aborted ahc2: Selection Timeout on A:0. 0 SCBs aborted ahc0: Selection Timeout on A:1. 0 SCBs aborted ahc1: Selection Timeout on A:1. 0 SCBs aborted ahc2: Selection Timeout on A:1. 0 SCBs aborted ahc0: Selection Timeout on A:2. 0 SCBs aborted ahc1: Selection Timeout on A:2. 0 SCBs aborted ahc2: Selection Timeout on A:2. 0 SCBs aborted ahc0: Selection Timeout on A:3. 0 SCBs aborted ahc1: Selection Timeout on A:3. 0 SCBs aborted ahc2: Selection Timeout on A:3. 0 SCBs aborted ahc0: Selection Timeout on A:4. 0 SCBs aborted ahc1: Selection Timeout on A:4. 0 SCBs aborted ahc2: Selection Timeout on A:4. 0 SCBs aborted ahc0: Selection Timeout on A:5. 0 SCBs aborted ahc1: Selection Timeout on A:5. 0 SCBs aborted ahc2: Selection Timeout on A:5. 0 SCBs aborted ahc0: Selection Timeout on A:6. 0 SCBs aborted ahc1: Selection Timeout on A:6. 0 SCBs aborted ahc2: Selection Timeout on A:6. 0 SCBs aborted ahc0: Selection Timeout on A:8. 0 SCBs aborted ahc0: Selection Timeout on A:9. 0 SCBs aborted ahc0: Selection Timeout on A:10. 0 SCBs aborted ahc0: Selection Timeout on A:11. 0 SCBs aborted ahc0: Selection Timeout on A:12. 0 SCBs aborted ahc0: Selection Timeout on A:13. 0 SCBs aborted ahc0: Selection Timeout on A:14. 0 SCBs aborted ahc0: Selection Timeout on A:15. 0 SCBs aborted SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x00050014 LDR: 0x02000000 DFR: 0x0fffffff lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff ioapic0: routing intpin 1 (ISA IRQ 1) to cluster 0 ioapic0: routing intpin 3 (ISA IRQ 3) to cluster 0 ioapic0: routing intpin 4 (ISA IRQ 4) to cluster 0 ioapic0: routing intpin 6 (ISA IRQ 6) to cluster 0 ioapic0: routing intpin 7 (ISA IRQ 7) to cluster 0 ioapic0: routing intpin 8 (ISA IRQ 8) to cluster 0 ioapic0: routing intpin 9 (ISA IRQ 9) to cluster 0 ioapic0: routing intpin 12 (ISA IRQ 12) to cluster 0 ioapic0: routing intpin 13 (ISA IRQ 13) to cluster 0 ioapic0: routing intpin 14 (ISA IRQ 14) to cluster 0 ioapic0: routing intpin 15 (ISA IRQ 15) to cluster 0 ioapic0: routing intpin 16 (PCI IRQ 16) to cluster 0 ioapic0: routing intpin 17 (PCI IRQ 17) to cluster 0 ioapic0: routing intpin 18 (PCI IRQ 18) to cluster 0 ioapic0: routing intpin 19 (PCI IRQ 19) to cluster 0 ioapic0: routing intpin 21 (PCI IRQ 21) to cluster 0 ioapic0: routing intpin 22 (PCI IRQ 22) to cluster 0 ------------------------------------------------------------------------- This is where the kernel paused for just over 100 seconds. ------------------------------------------------------------------------- GEOM: new disk ad0 GEOM: new disk ad1 GEOM: new disk ad4 GEOM: new disk ad6 [0] f:00 typ:11 s(CHS):0/1/1 e(CHS):340/254/63 s:63 l:5478102 [1] f:00 typ:165 s(CHS):341/0/1 e(CHS):681/254/63 s:5478165 l:5478165 [2] f:80 typ:165 s(CHS):682/0/1 e(CHS):1022/254/63 s:10956330 l:5478165 [3] f:00 typ:165 s(CHS):1023/0/1 e(CHS):1023/254/63 s:16434495 l:143637165 GEOM: Configure ad0s1, start 32256 length 2804788224 end 2804820479 GEOM: Configure ad0s2, start 2804820480 length 2804820480 end 5609640959 GEOM: Configure ad0s3, start 5609640960 length 2804820480 end 8414461439 GEOM: Configure ad0s4, start 8414461440 length 73542228480 end 81956689919 [0] f:00 typ:11 s(CHS):0/1/1 e(CHS):340/254/63 s:63 l:5478102 [1] f:80 typ:165 s(CHS):341/0/1 e(CHS):681/254/63 s:5478165 l:5478165 [2] f:00 typ:165 s(CHS):682/0/1 e(CHS):1022/254/63 s:10956330 l:5478165 [3] f:00 typ:165 s(CHS):1023/0/1 e(CHS):1023/254/63 s:16434495 l:143637165 GEOM: Configure ad1s1, start 32256 length 2804788224 end 2804820479 GEOM: Configure ad1s2, start 2804820480 length 2804820480 end 5609640959 GEOM: Configure ad1s3, start 5609640960 length 2804820480 end 8414461439 GEOM: Configure ad1s4, start 8414461440 length 73542228480 end 81956689919 [0] f:00 typ:98 s(CHS):0/1/1 e(CHS):340/254/63 s:63 l:5478102 [1] f:80 typ:165 s(CHS):341/0/1 e(CHS):681/254/63 s:5478165 l:5478165 [2] f:00 typ:165 s(CHS):682/0/1 e(CHS):1022/254/63 s:10956330 l:5478165 [3] f:00 typ:165 s(CHS):1023/0/1 e(CHS):1023/80/63 s:16434495 l:218007153 GEOM: Configure ad4s1, start 32256 length 2804788224 end 2804820479 GEOM: Configure ad4s2, start 2804820480 length 2804820480 end 5609640959 GEOM: Configure ad4s3, start 5609640960 length 2804820480 end 8414461439 GEOM: Configure ad4s4, start 8414461440 length 111619662336 end 120034123775 [0] f:00 typ:98 s(CHS):0/1/1 e(CHS):340/254/63 s:63 l:5478102 [1] f:00 typ:165 s(CHS):341/0/1 e(CHS):681/254/63 s:5478165 l:5478165 [2] f:00 typ:165 s(CHS):682/0/1 e(CHS):1022/254/63 s:10956330 l:5478165 [3] f:00 typ:165 s(CHS):1023/0/1 e(CHS):1023/254/63 s:16434495 l:218007153 GEOM: Configure ad6s1, start 32256 length 2804788224 end 2804820479 GEOM: Configure ad6s2, start 2804820480 length 2804820480 end 5609640959 GEOM: Configure ad6s3, start 5609640960 length 2804820480 end 8414461439 GEOM: Configure ad6s4, start 8414461440 length 111619662336 end 120034123775 GEOM: Configure ad0s2a, start 0 length 197406720 end 197406719 GEOM: Configure ad0s2b, start 197406720 length 65802240 end 263208959 GEOM: Configure ad0s2c, start 0 length 2804820480 end 2804820479 GEOM: Configure ad0s2d, start 263208960 length 2410007040 end 2673215999 GEOM: Configure ad0s2e, start 2673216000 length 131604480 end 2804820479 GEOM: Configure ad0s3a, start 0 length 197406720 end 197406719 GEOM: Configure ad0s3b, start 197406720 length 65802240 end 263208959 GEOM: Configure ad0s3c, start 0 length 2804820480 end 2804820479 GEOM: Configure ad0s3d, start 263208960 length 2410007040 end 2673215999 GEOM: Configure ad0s3e, start 2673216000 length 131604480 end 2804820479 GEOM: Configure ad0s4a, start 32256 length 11951299584 end 11951331839 GEOM: Configure ad0s4c, start 0 length 73542228480 end 73542228479 GEOM: Configure ad0s4d, start 11951331840 length 20530298880 end 32481630719 GEOM: Configure ad0s4e, start 32481630720 length 20530298880 end 53011929599 GEOM: Configure ad0s4f, start 53011929600 length 20530298880 end 73542228479 GEOM: Configure ad1s2a, start 0 length 197406720 end 197406719 GEOM: Configure ad1s2b, start 197406720 length 65802240 end 263208959 GEOM: Configure ad1s2c, start 0 length 2804820480 end 2804820479 GEOM: Configure ad1s2d, start 263208960 length 2410007040 end 2673215999 GEOM: Configure ad1s2e, start 2673216000 length 131604480 end 2804820479 GEOM: Configure ad1s3a, start 0 length 197406720 end 197406719 GEOM: Configure ad1s3b, start 197406720 length 65802240 end 263208959 GEOM: Configure ad1s3c, start 0 length 2804820480 end 2804820479 GEOM: Configure ad1s3d, start 263208960 length 2410007040 end 2673215999 GEOM: Configure ad1s3e, start 2673216000 length 131604480 end 2804820479 GEOM: Configure ad1s4a, start 32256 length 11951299584 end 11951331839 GEOM: Configure ad1s4c, start 0 length 73542228480 end 73542228479 GEOM: Configure ad1s4d, start 11951331840 length 20530298880 end 32481630719 GEOM: Configure ad1s4e, start 32481630720 length 20530298880 end 53011929599 GEOM: Configure ad1s4f, start 53011929600 length 20530298880 end 73542228479 GEOM: Configure ad4s2a, start 0 length 197406720 end 197406719 GEOM: Configure ad4s2b, start 197406720 length 65802240 end 263208959 GEOM: Configure ad4s2c, start 0 length 2804820480 end 2804820479 GEOM: Configure ad4s2d, start 263208960 length 2410007040 end 2673215999 GEOM: Configure ad4s2e, start 2673216000 length 131604480 end 2804820479 GEOM: Configure ad4s3a, start 0 length 197406720 end 197406719 GEOM: Configure ad4s3b, start 197406720 length 65802240 end 263208959 GEOM: Configure ad4s3c, start 0 length 2804820480 end 2804820479 GEOM: Configure ad4s3d, start 263208960 length 2410007040 end 2673215999 GEOM: Configure ad4s3e, start 2673216000 length 131604480 end 2804820479 GEOM: Configure ad4s4a, start 1024 length 8965554176 end 8965555199 GEOM: Configure ad4s4c, start 0 length 111619662336 end 111619662335 GEOM: Configure ad4s4d, start 8965555200 length 20530298880 end 29495854079 GEOM: Configure ad4s4e, start 29495854080 length 20530298880 end 50026152959 GEOM: Configure ad4s4f, start 50026152960 length 20530298880 end 70556451839 GEOM: Configure ad4s4g, start 70556451840 length 20530298880 end 91086750719 GEOM: Configure ad4s4h, start 91086750720 length 20530298880 end 111617049599 GEOM: Configure ad6s2a, start 0 length 197406720 end 197406719 GEOM: Configure ad6s2b, start 197406720 length 65802240 end 263208959 GEOM: Configure ad6s2c, start 0 length 2804820480 end 2804820479 GEOM: Configure ad6s2d, start 263208960 length 2410007040 end 2673215999 GEOM: Configure ad6s2e, start 2673216000 length 131604480 end 2804820479 GEOM: Configure ad6s3a, start 0 length 197406720 end 197406719 GEOM: Configure ad6s3b, start 197406720 length 65802240 end 263208959 GEOM: Configure ad6s3c, start 0 length 2804820480 end 2804820479 GEOM: Configure ad6s3d, start 263208960 length 2410007040 end 2673215999 GEOM: Configure ad6s3e, start 2673216000 length 131604480 end 2804820479 GEOM: Configure ad6s4a, start 1024 length 8965554176 end 8965555199 GEOM: Configure ad6s4c, start 0 length 111619662336 end 111619662335 GEOM: Configure ad6s4d, start 8965555200 length 20530298880 end 29495854079 GEOM: Configure ad6s4e, start 29495854080 length 20530298880 end 50026152959 GEOM: Configure ad6s4f, start 50026152960 length 20530298880 end 70556451839 GEOM: Configure ad6s4g, start 70556451840 length 20530298880 end 91086750719 GEOM: Configure ad6s4h, start 91086750720 length 20530298880 end 111617049599 Mounting root from ufs:/dev/ad0s3a start_init: trying /sbin/init splash: image decoder found: dragon_saver em0: Link is up 100 Mbps Full DuplexReceived on Mon Oct 25 2004 - 22:47:57 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:19 UTC