I have problems running recent 5.X on a Compaq Armada 3500 (no ACPI). I used to get (same with 4.X): ata1-slave: FAILURE - ATAPI_IDENTIFY no interrupt for the cdrom, and the boot succeeded - see dmesg.20040723v After a RELENG_5 cvsup on Aug 28, the message became: ata1-slave: FAILURE - ATAPI_IDENTIFY status=1<ERROR> error=1<ILLEGAL_LENGTH> LBA=0 and the boot stopped here. I tried updating sys/dev/ata to -current, i.e. with: ata-all.c 1.224 ata-all.h 1.82 ata-chipset.c 1.84 ata-disk.c 1.177 ata-dma.c 1.130 ata-lowlevel.c 1.46 ata-pci.c 1.88 ata-queue.c 1.34 atapi-cd.c 1.171 without any progress - see dmesg.curata (hand copied) I reverted to the (approximatively) Aug 12 state, i.e. with: ata-all.c 1.221 ata-all.h 1.80 ata-chipset.c 1.79 ata-disk.c 1.175 ata-dma.c 1.128 ata-lowlevel.c 1.43 ata-pci.c 1.87 ata-queue.c 1.31 to get a runnable system - see dmesg.20040831v Note that the: ATAPI_RESET time = 2910us is only 210us with a non verbose boot. The cdrom seems to be of the evil kind which is both master and slave, with no visible/accessible switch/jumper. Any hope ? Claude Buisson Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2-CURRENT-20040710 #0: Fri Jul 16 22:23:07 CEST 2004 root_at_armada.home.tbf:/home/obj/home/src/sys/ARMADA5X Preloaded elf kernel "/boot/kernel/kernel" at 0xc070b000. Preloaded elf module "/boot/kernel/if_xe.ko" at 0xc070b1a4. Preloaded elf module "/boot/kernel/snd_ess.ko" at 0xc070b250. Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc070b2fc. Preloaded elf module "/boot/kernel/snd_sbc.ko" at 0xc070b3a8. Preloaded elf module "/boot/kernel/ums.ko" at 0xc070b454. Preloaded elf module "/boot/kernel/apm.ko" at 0xc070b4fc. Preloaded elf module "/boot/kernel/intpm.ko" at 0xc070b5a4. Preloaded elf module "/boot/kernel/smbus.ko" at 0xc070b650. Calibrating clock(s) ... i8254 clock: 1193213 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 300012655 Hz CPU: Pentium II/Pentium II Xeon/Celeron (300.01-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x652 Stepping = 2 Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR> real memory = 201293824 (191 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000826000 - 0x000000000bc67fff, 189014016 bytes (46146 pages) avail memory = 191614976 (182 MB) bios32: Found BIOS32 Service Directory header at 0xc00fa000 bios32: Entry = 0xf0000 (c00f0000) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0x484 pnpbios: Found PnP BIOS data at 0xc00fe2d0 pnpbios: Entry = f0000:4d37 Rev = 1.0 pnpbios: Event flag at fe2f6 pnpbios: OEM ID 5eb0110e Other BIOS signatures found: null: <null device, zero device> random: <entropy source, Software, Yarrow> mem: <memory & I/O> Pentium Pro MTRR support enabled npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface pci_open(1): mode 1 addr port (0x0cf8) is 0x80000058 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71928086) pcibios: BIOS version 2.10 apm0: <APM BIOS> on motherboard apm0: found APM BIOS v1.2, connected at v1.2 pcib0: <Intel 82443BX host to PCI bridge (AGP disabled)> at pcibus 0 on motherboard pci0: <PCI bus> on pcib0 pci0: physical bus=0 map[10]: type 3, range 32, base 50000000, size 28, enabled found-> vendor=0x8086, dev=0x7192, revid=0x02 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2200, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x7110, revid=0x02 bus=0, slot=7, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x010f, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 00001020, size 4, enabled found-> vendor=0x8086, dev=0x7111, revid=0x01 bus=0, slot=7, func=1 class=01-01-80, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 00001000, size 5, enabled found-> vendor=0x8086, dev=0x7112, revid=0x01 bus=0, slot=7, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=11 map[90]: type 4, range 32, base 00000d00, size 4, enabled found-> vendor=0x8086, dev=0x7113, revid=0x02 bus=0, slot=7, func=3 class=06-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 1, range 32, base 40000000, size 24, enabled found-> vendor=0x102c, dev=0x00c0, revid=0x64 bus=0, slot=8, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0083, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[10]: type 1, range 32, base 7fffe000, size 12, enabled found-> vendor=0x104c, dev=0xac17, revid=0x02 bus=0, slot=17, func=0 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x42 (1980 ns), mingnt=0xc0 (48000 ns), maxlat=0x03 (750 ns) intpin=a, irq=11 powerspec 1 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base 7ffff000, size 12, enabled found-> vendor=0x104c, dev=0xac17, revid=0x02 bus=0, slot=17, func=1 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x42 (1980 ns), mingnt=0xc0 (48000 ns), maxlat=0x03 (750 ns) intpin=a, irq=11 powerspec 1 supports D0 D1 D2 D3 current D0 isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 UDMA33 controller> port 0x1020-0x102f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1020 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80 ata0-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80 ata0-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80 ata0-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80 ata0-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80 ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=51 ostat1=01 ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb ata1-slave: stat=0x00 err=0x01 lsb=0x14 msb=0xeb ata1: reset tp2 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER> ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1000-0x101f irq 11 at device 7.2 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1000 uhci0: [GIANT-LOCKED] usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered intpm0: <Intel 82371AB Power management controller> port 0xd00-0xd0f irq 9 at device 7.3 on pci0 intpm0: Reserved 0x10 bytes for rid 0x90 type 4 at 0xd00 intpm0: I/O mapped d00 intpm0: intr IRQ 9 enabled revision 0 intpm0: [GIANT-LOCKED] intsmb0: <Intel PIIX4 SMBUS Interface> on intpm0 smbus0: <System Management Bus> on intsmb0 intpm0: PM I/O mapped f00 pci0: <display, VGA> at device 8.0 (no driver attached) cbb0: <TI1220 PCI-CardBus Bridge> mem 0x7fffe000-0x7fffefff irq 11 at device 17.0 on pci0 cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x7fffe000 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb0: [MPSAFE] cbb0: PCI Configuration space: 0x00: 0xac17104c 0x02100007 0x06070002 0x00824208 0x10: 0x7fffe000 0x020000a0 0x20010100 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x0740010b 0x40: 0xb0470e11 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x28049060 0x00000000 0x00000000 0x01001c72 0x90: 0x61648280 0x00000000 0x00000000 0x00000000 0xa0: 0x7e210001 0x00800000 0x00000000 0x00000007 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 cbb1: <TI1220 PCI-CardBus Bridge> mem 0x7ffff000-0x7fffffff irq 11 at device 17.1 on pci0 cbb1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x7ffff000 cardbus1: <CardBus bus> on cbb1 pccard1: <16-bit PCCard bus> on cbb1 cbb1: [MPSAFE] cbb1: PCI Configuration space: 0x00: 0xac17104c 0x02100007 0x06070002 0x00824208 0x10: 0x7ffff000 0x020000a0 0x20020200 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x0740010b 0x40: 0xb0470e11 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x28049060 0x00000000 0x00000000 0x01001c72 0x90: 0x61648280 0x00000000 0x00000000 0x00000000 0xa0: 0x7e210001 0x00800000 0x00000000 0x00000007 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 cpu0 on motherboard ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 pnpbios: 18 devices, largest 250 bytes PNP0401: adding irq mask 0x80 PNP0401: adding dma mask 0x1 PNP0401: adding io range 0x378-0x37f, size=0x8, align=0 PNP0401: adding io range 0x778-0x77a, size=0x3, align=0 pnpbios: handle 1 device ID PNP0401 (0104d041) PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0 PNP0501: adding irq mask 0x10 pnpbios: handle 2 device ID PNP0501 (0105d041) pnpbios: handle 3 device ID PNP0511 (1105d041) PNP0700: adding irq mask 0x40 PNP0700: adding dma mask 0x4 PNP0700: adding io range 0x3f0-0x3f5, size=0x6, align=0 pnpbios: handle 4 device ID PNP0700 (0007d041) ESS0006: adding io range 0x250-0x257, size=0x8, align=0 pnpbios: handle 5 device ID ESS0006 (06007316) CPQb0ac: adding io range 0x220-0x22f, size=0x10, align=0 CPQb0ac: adding io range 0x388-0x38b, size=0x4, align=0 CPQb0ac: adding io range 0x330-0x331, size=0x2, align=0 CPQb0ac: adding irq mask 0x20 CPQb0ac: adding dma mask 0x2 CPQb0ac: adding dma mask 0x20 pnpbios: handle 6 device ID CPQb0ac (acb0110e) PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000 PNP0c01: adding fixed memory32 range 0xf0000-0xfffff, size=0x10000 PNP0c01: adding fixed memory32 range 0x100000-0xbffffff, size=0xbf00000 pnpbios: handle 7 device ID PNP0c01 (010cd041) PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0 PNP0c04: adding irq mask 0x2000 pnpbios: handle 8 device ID PNP0c04 (040cd041) PNP0100: adding io range 0x40-0x43, size=0x4, align=0 PNP0100: adding irq mask 0x1 pnpbios: handle 10 device ID PNP0100 (0001d041) PNP0200: adding io range 0-0xf, size=0x10, align=0 PNP0200: adding io range 0x80-0x8f, size=0x10, align=0 PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0 PNP0200: adding dma mask 0x10 pnpbios: handle 11 device ID PNP0200 (0002d041) PNP0800: adding io range 0x61-0x61, size=0x1, align=0 pnpbios: handle 12 device ID PNP0800 (0008d041) PNP0b00: adding io range 0x70-0x71, size=0x2, align=0 PNP0b00: adding io range 0x72-0x73, size=0x2, align=0 PNP0b00: adding irq mask 0x100 pnpbios: handle 13 device ID PNP0b00 (000bd041) PNP0303: adding io range 0x60-0x60, size=0x1, align=0 PNP0303: adding io range 0x64-0x64, size=0x1, align=0 PNP0303: adding irq mask 0x2 pnpbios: handle 14 device ID PNP0303 (0303d041) PNP0f13: adding irq mask 0x1000 pnpbios: handle 15 device ID PNP0f13 (130fd041) PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0 pnpbios: handle 16 device ID PNP0a03 (030ad041) PNP0c02: adding fixed memory32 range 0xfffc0000-0xffffffff, size=0x40000 PNP0c02: adding fixed memory32 range 0xcb000-0xcbfff, size=0x1000 PNP0c02: adding io range 0x22-0x3f, size=0x1e, align=0 PNP0c02: adding io range 0x44-0x5f, size=0x1c, align=0 PNP0c02: adding io range 0x62-0x63, size=0x2, align=0 PNP0c02: adding io range 0x65-0x6f, size=0xb, align=0 PNP0c02: adding io range 0x74-0x74, size=0x1, align=0 PNP0c02: adding io range 0x75-0x75, size=0x1, align=0 PNP0c02: adding io range 0x76-0x76, size=0x1, align=0 PNP0c02: adding io range 0x77-0x77, size=0x1, align=0 PNP0c02: adding io range 0x90-0x91, size=0x2, align=0 PNP0c02: adding io range 0x92-0x92, size=0x1, align=0 PNP0c02: adding io range 0x93-0x9f, size=0xd, align=0 PNP0c02: adding io range 0xa2-0xbf, size=0x1e, align=0 PNP0c02: adding io range 0xe0-0xe1, size=0x2, align=0 PNP0c02: adding io range 0xe2-0xe3, size=0x2, align=0 PNP0c02: adding io range 0x100-0x107, size=0x8, align=0 PNP0c02: adding io range 0x260-0x263, size=0x4, align=0 PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0 PNP0c02: adding io range 0xf00-0xf3f, size=0x40, align=0 PNP0c02: adding io range 0xd00-0xd0f, size=0x10, align=0 pnpbios: handle 18 device ID PNP0c02 (020cd041) PNP0e03: adding io range 0x3e0-0x3e1, size=0x2, align=0 pnpbios: handle 19 device ID PNP0e03 (030ed041) sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <ISA Option ROM> at iomem 0xc0000-0xcafff on isa0 pmtimer0 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 atkbd0: [GIANT-LOCKED] psm0: current command byte:0065 psm0: <PS/2 Mouse> flags 0xc000 irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model IntelliMouse Explorer, device ID 4-00, 5 buttons psm0: config:0000c000, flags:00000000, packet size:4 psm0: syncmask:08, syncbits:08 fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0: parallel port found at 0x378 ppc0: using extended I/O port range ppc0: EPP SPP ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port fb: new array size 4 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <12 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio0: irq maps: 0x1 0x11 0x1 0x1 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff isa_probe_children: probing PnP devices unknown: <PNP0401> can't assign resources (port) unknown: <PNP0401> at port 0x378-0x37f on isa0 unknown: <PNP0501> can't assign resources (port) unknown: <PNP0501> at port 0x3f8-0x3ff on isa0 unknown: <Generic IRDA-compatible device> failed to probe on isa0 unknown: <PNP0700> can't assign resources (port) unknown: <PNP0700> at port 0x3f0-0x3f5 on isa0 sbc0: <ESS ES1869 (Compaq OEM)> at port 0x330-0x331,0x388-0x38b,0x220-0x22f irq 5 drq 5,1 on isa0 sbc0: [GIANT-LOCKED] pcm0: <ESS 18xx DSP> on sbc0 pcm0: ESS1869 detected, newspeed pcm0: [GIANT-LOCKED] pcm0: sndbuf_setmap 1de000, 1000; 0xc987d000 -> 1de000 pcm0: sndbuf_setmap 1e5000, 1000; 0xc987e000 -> 1e5000 unknown: <PNP0800> failed to probe at port 0x61 on isa0 unknown: <PNP0303> can't assign resources (port) unknown: <PNP0303> at port 0x60 on isa0 unknown: <PNP0f13> can't assign resources (irq) unknown: <PNP0f13> at irq 12 on isa0 unknown: <PNP0c02> can't assign resources (port) unknown: <PNP0c02> at port 0x4d0-0x4d1,0x260-0x263,0x100-0x107,0xe2-0xe3,0xe0-0xe1,0xa2-0xbf,0x93-0x9f,0x92,0x90-0x91,0x77,0x76,0x75,0x74,0x65-0x6f,0x62-0x63,0x44-0x5f,0x22-0x3f iomem 0xcb000-0xcbfff,0xfffc0000-0xffffffff on isa0 unknown: <PNP0e03> failed to probe at port 0x3e0-0x3e1 on isa0 Device configuration finished. TSC timecounter disabled: APM enabled. Timecounter "TSC" frequency 300012655 Hz quality -1000 Timecounters tick every 10.000 msec lo0: bpf attached ata0-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin ata0-master: setting PIO4 on Intel PIIX4 chip ata0-master: setting UDMA33 on Intel PIIX4 chip ad0: <IBM-DBCA-206480/BC4OA82F> ATA-4 disk at ata0-master ad0: 6194MB (12685680 sectors), 13424 C, 15 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA33 GEOM: new disk ad0 [0] f:80 typ:11 s(CHS):1/0/1 e(CHS):278/239/63 s:15120 l:4203360 [1] f:00 typ:18 s(CHS):0/1/1 e(CHS):0/239/63 s:63 l:15057 [2] f:00 typ:165 s(CHS):279/0/1 e(CHS):838/239/63 s:4218480 l:8467200 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad0s1, start 7741440 length 2152120320 end 2159861759 GEOM: Configure ad0s2, start 32256 length 7709184 end 7741439 GEOM: Configure ad0s3, start 2159861760 length 4335206400 end 6495068159 GEOM: Configure ad0s3a, start 0 length 134217728 end 134217727 GEOM: Configure ad0s3b, start 134217728 length 536870912 end 671088639 GEOM: Configure ad0s3c, start 0 length 4335206400 end 4335206399 GEOM: Configure ad0s3d, start 671088640 length 872415232 end 1543503871 GEOM: Configure ad0s3e, start 1543503872 length 134217728 end 1677721599 GEOM: Configure ad0s3f, start 1677721600 length 2657484800 end 4335206399 ata1-slave: FAILURE - ATAPI_IDENTIFY no interrupt ata1-slave: FAILURE - ATAPI_IDENTIFY no interrupt ata1-master: pio=0x0c wdma=0x22 udma=0xffffffff cable=40pin ata1-master: setting PIO4 on Intel PIIX4 chip acd0: <UJDA150/1.02> CDROM drive at ata1 as master acd0: read 4134KB/s (4134KB/s), 128KB buffer, PIO4 acd0: Reads: CDR, CDRW, CDDA acd0: Writes: acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc Mounting root from ufs:/dev/ad0s3a start_init: trying /sbin/init Hand copied dmesg of latest kernel boot (with updated sys/dev/ata/) atapci0: <Intel PIIX4 UDMA33 controller> port 0x1020-0x102f,0x376,0x170-0x177, 0x3f6,0x1f0-0x1f7 at device 7.1 on pci0 atapci0: Reseved 0x10 bytes for rid 0x20 type 4 at 0x1020 ata0: channel #0 on atapci0 atapci0: Reseved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reseved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask 03 ostat0=50 ostat1=00 ata0-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80 ata0-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80 ata0-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80 ata0-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80 ata0-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80 ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata0: [MPSAFE] ata1: channel #1 on atapci0 atapci0: Reseved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reseved 0x1 bytes for rid 0x1c type 4 at 0x3f6 ata1: reset tp1 mask 03 ostat0=51 ostat1=01 ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb ata1-slave: stat=0x00 err=0x01 lsb=0x14 msb=0xeb ata1: reset tp2 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER> ata1: [MPSAFE] ... ata0-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin ata0-master: setting PIO4 on Intel PIIX4 chip ata0-master: setting UDMA33 on Intel PIIX4 chip ad0: <IBM-DBCA-206480/BC40A82F> ATA-4 disk at ata0-master ad0: 6194MB (12685680 sectors), 13424 C, 15 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA33 GEOM: new disk ad0 ... ata1: reiniting channel .. ata1: reset tp1 mask 03 ostat0=00 ostat1=01 ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb ata1-slave: stat=0x00 err=0x01 lsb=0x14 msb=0xeb ata1: reset tp2 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER> ata1: resetting done .. ata1-slave: FAILURE - ATAPI_IDENTIFY status=1<ERROR> error=1<ILLEGAL_LENGTH> LBA=0 Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.3-BETA2 #0: Tue Aug 31 14:58:45 CEST 2004 toor_at_adele.home.tbf:/home/obj/home/src/sys/ARMADA5X Preloaded elf kernel "/boot/kernel/kernel" at 0xc072a000. Preloaded elf module "/boot/kernel/vesa.ko" at 0xc072a1a4. Preloaded elf module "/boot/kernel/if_xe.ko" at 0xc072a250. Preloaded elf module "/boot/kernel/snd_ess.ko" at 0xc072a2fc. Preloaded elf module "/boot/kernel/sound.ko" at 0xc072a3a8. Preloaded elf module "/boot/kernel/snd_sbc.ko" at 0xc072a454. Preloaded elf module "/boot/kernel/ums.ko" at 0xc072a500. Preloaded elf module "/boot/kernel/apm.ko" at 0xc072a5a8. Preloaded elf module "/boot/kernel/intpm.ko" at 0xc072a650. Preloaded elf module "/boot/kernel/smbus.ko" at 0xc072a6fc. Calibrating clock(s) ... i8254 clock: 1193239 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 300011828 Hz CPU: Pentium II/Pentium II Xeon/Celeron (300.01-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x652 Stepping = 2 Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR> real memory = 201326592 (192 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000826000 - 0x000000000bc6ffff, 189046784 bytes (46154 pages) avail memory = 191655936 (182 MB) bios32: Found BIOS32 Service Directory header at 0xc00fa000 bios32: Entry = 0xf0000 (c00f0000) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0x484 pnpbios: Found PnP BIOS data at 0xc00fe2d0 pnpbios: Entry = f0000:4d37 Rev = 1.0 pnpbios: Event flag at fe2f6 pnpbios: OEM ID 5eb0110e Other BIOS signatures found: mem: <memory> Pentium Pro MTRR support enabled null: <null device, zero device> random: <entropy source, Software, Yarrow> io: <I/O> VESA: information block 56 45 53 41 00 02 00 01 00 01 01 00 00 00 40 00 00 01 20 00 00 01 16 01 00 01 31 01 00 01 4a 01 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 VESA: 16 mode(s) found VESA: v2.0, 2048k memory, flags:0x1, mode table:0xc06e18c0 (1000040) VESA: CHIPS 69000 Super VGA VESA: Chips & Technologies, Inc. 69000 Display Controller 2 npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface pci_open(1): mode 1 addr port (0x0cf8) is 0x80000058 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71928086) pcibios: BIOS version 2.10 apm0: <APM BIOS> on motherboard apm0: found APM BIOS v1.2, connected at v1.2 pcib0: <Intel 82443BX host to PCI bridge (AGP disabled)> pcibus 0 on motherboard pci0: <PCI bus> on pcib0 pci0: physical bus=0 map[10]: type 3, range 32, base 50000000, size 28, enabled found-> vendor=0x8086, dev=0x7192, revid=0x02 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2200, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x7110, revid=0x02 bus=0, slot=7, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x010f, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 00001020, size 4, enabled found-> vendor=0x8086, dev=0x7111, revid=0x01 bus=0, slot=7, func=1 class=01-01-80, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 00001000, size 5, enabled found-> vendor=0x8086, dev=0x7112, revid=0x01 bus=0, slot=7, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=11 map[90]: type 4, range 32, base 00000d00, size 4, enabled found-> vendor=0x8086, dev=0x7113, revid=0x02 bus=0, slot=7, func=3 class=06-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 1, range 32, base 40000000, size 24, enabled found-> vendor=0x102c, dev=0x00c0, revid=0x64 bus=0, slot=8, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0083, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[10]: type 1, range 32, base 7fffe000, size 12, enabled found-> vendor=0x104c, dev=0xac17, revid=0x02 bus=0, slot=17, func=0 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x42 (1980 ns), mingnt=0xc0 (48000 ns), maxlat=0x03 (750 ns) intpin=a, irq=11 powerspec 1 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base 7ffff000, size 12, enabled found-> vendor=0x104c, dev=0xac17, revid=0x02 bus=0, slot=17, func=1 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x42 (1980 ns), mingnt=0xc0 (48000 ns), maxlat=0x03 (750 ns) intpin=a, irq=11 powerspec 1 supports D0 D1 D2 D3 current D0 isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 UDMA33 controller> port 0x1020-0x102f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1020 ata0: channel #0 on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80 ata0-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80 ata0-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80 ata0-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80 ata0-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80 ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata0: [MPSAFE] ata1: channel #1 on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=51 ostat1=01 ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb ata1-slave: stat=0x00 err=0x01 lsb=0x14 msb=0xeb ata1: reset tp2 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER> ata1: [MPSAFE] uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1000-0x101f irq 11 at device 7.2 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1000 uhci0: [GIANT-LOCKED] usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/11.10, addr 2, iclass 3/1 ums0: 3 buttons and Z dir. intpm0: <Intel 82371AB Power management controller> port 0xd00-0xd0f irq 9 at device 7.3 on pci0 intpm0: Reserved 0x10 bytes for rid 0x90 type 4 at 0xd00 intpm0: I/O mapped d00 intpm0: intr IRQ 9 enabled revision 0 intpm0: [GIANT-LOCKED] intsmb0: <Intel PIIX4 SMBUS Interface> on intpm0 smbus0: <System Management Bus> on intsmb0 intpm0: PM I/O mapped f00 pci0: <display, VGA> at device 8.0 (no driver attached) cbb0: <TI1220 PCI-CardBus Bridge> mem 0x7fffe000-0x7fffefff irq 11 at device 17.0 on pci0 cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x7fffe000 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb0: [MPSAFE] cbb0: PCI Configuration space: 0x00: 0xac17104c 0x02100007 0x06070002 0x00824208 0x10: 0x7fffe000 0x020000a0 0x20010100 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x0740010b 0x40: 0xb0470e11 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x28049060 0x00000000 0x00000000 0x01001c72 0x90: 0x61648280 0x00000000 0x00000000 0x00000000 0xa0: 0x7e210001 0x00800000 0x00000801 0x00000007 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 cbb1: <TI1220 PCI-CardBus Bridge> mem 0x7ffff000-0x7fffffff irq 11 at device 17.1 on pci0 cbb1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x7ffff000 cardbus1: <CardBus bus> on cbb1 pccard1: <16-bit PCCard bus> on cbb1 cbb1: [MPSAFE] cbb1: PCI Configuration space: 0x00: 0xac17104c 0x02100007 0x06070002 0x00824208 0x10: 0x7ffff000 0x020000a0 0x20020200 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x0740010b 0x40: 0xb0470e11 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x2804b060 0x00000000 0x00000000 0x01001c72 0x90: 0x61648280 0x00000000 0x00000000 0x00000000 0xa0: 0x7e210001 0x00800000 0x00000801 0x00000007 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 cpu0 on motherboard ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 pnpbios: 18 devices, largest 250 bytes PNP0401: adding irq mask 0x80 PNP0401: adding dma mask 0x8 PNP0401: adding io range 0x378-0x37f, size=0x8, align=0 PNP0401: adding io range 0x778-0x77a, size=0x3, align=0 pnpbios: handle 1 device ID PNP0401 (0104d041) PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0 PNP0501: adding irq mask 0x10 pnpbios: handle 2 device ID PNP0501 (0105d041) pnpbios: handle 3 device ID PNP0511 (1105d041) PNP0700: adding irq mask 0x40 PNP0700: adding dma mask 0x4 PNP0700: adding io range 0x3f0-0x3f5, size=0x6, align=0 pnpbios: handle 4 device ID PNP0700 (0007d041) ESS0006: adding io range 0x250-0x257, size=0x8, align=0 pnpbios: handle 5 device ID ESS0006 (06007316) CPQb0ac: adding io range 0x220-0x22f, size=0x10, align=0 CPQb0ac: adding io range 0x388-0x38b, size=0x4, align=0 CPQb0ac: adding io range 0x330-0x331, size=0x2, align=0 CPQb0ac: adding irq mask 0x20 CPQb0ac: adding dma mask 0x2 CPQb0ac: adding dma mask 0x20 pnpbios: handle 6 device ID CPQb0ac (acb0110e) PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000 PNP0c01: adding fixed memory32 range 0xf0000-0xfffff, size=0x10000 PNP0c01: adding fixed memory32 range 0x100000-0xbffffff, size=0xbf00000 pnpbios: handle 7 device ID PNP0c01 (010cd041) PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0 PNP0c04: adding irq mask 0x2000 pnpbios: handle 8 device ID PNP0c04 (040cd041) PNP0100: adding io range 0x40-0x43, size=0x4, align=0 PNP0100: adding irq mask 0x1 pnpbios: handle 10 device ID PNP0100 (0001d041) PNP0200: adding io range 0-0xf, size=0x10, align=0 PNP0200: adding io range 0x80-0x8f, size=0x10, align=0 PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0 PNP0200: adding dma mask 0x10 pnpbios: handle 11 device ID PNP0200 (0002d041) PNP0800: adding io range 0x61-0x61, size=0x1, align=0 pnpbios: handle 12 device ID PNP0800 (0008d041) PNP0b00: adding io range 0x70-0x71, size=0x2, align=0 PNP0b00: adding io range 0x72-0x73, size=0x2, align=0 PNP0b00: adding irq mask 0x100 pnpbios: handle 13 device ID PNP0b00 (000bd041) PNP0303: adding io range 0x60-0x60, size=0x1, align=0 PNP0303: adding io range 0x64-0x64, size=0x1, align=0 PNP0303: adding irq mask 0x2 pnpbios: handle 14 device ID PNP0303 (0303d041) PNP0f13: adding irq mask 0x1000 pnpbios: handle 15 device ID PNP0f13 (130fd041) PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0 pnpbios: handle 16 device ID PNP0a03 (030ad041) PNP0c02: adding fixed memory32 range 0xfffc0000-0xffffffff, size=0x40000 PNP0c02: adding fixed memory32 range 0xcb000-0xcbfff, size=0x1000 PNP0c02: adding io range 0x22-0x3f, size=0x1e, align=0 PNP0c02: adding io range 0x44-0x5f, size=0x1c, align=0 PNP0c02: adding io range 0x62-0x63, size=0x2, align=0 PNP0c02: adding io range 0x65-0x6f, size=0xb, align=0 PNP0c02: adding io range 0x74-0x74, size=0x1, align=0 PNP0c02: adding io range 0x75-0x75, size=0x1, align=0 PNP0c02: adding io range 0x76-0x76, size=0x1, align=0 PNP0c02: adding io range 0x77-0x77, size=0x1, align=0 PNP0c02: adding io range 0x90-0x91, size=0x2, align=0 PNP0c02: adding io range 0x92-0x92, size=0x1, align=0 PNP0c02: adding io range 0x93-0x9f, size=0xd, align=0 PNP0c02: adding io range 0xa2-0xbf, size=0x1e, align=0 PNP0c02: adding io range 0xe0-0xe1, size=0x2, align=0 PNP0c02: adding io range 0xe2-0xe3, size=0x2, align=0 PNP0c02: adding io range 0x100-0x107, size=0x8, align=0 PNP0c02: adding io range 0x260-0x263, size=0x4, align=0 PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0 PNP0c02: adding io range 0xf00-0xf3f, size=0x40, align=0 PNP0c02: adding io range 0xd00-0xd0f, size=0x10, align=0 pnpbios: handle 18 device ID PNP0c02 (020cd041) PNP0e03: adding io range 0x3e0-0x3e1, size=0x2, align=0 pnpbios: handle 19 device ID PNP0e03 (030ed041) sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <ISA Option ROM> at iomem 0xc0000-0xcafff on isa0 pmtimer0 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 atkbd0: [GIANT-LOCKED] psm0: current command byte:0065 psm0: <PS/2 Mouse> flags 0xc000 irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons psm0: config:0000c000, flags:00000008, packet size:3 psm0: syncmask:c0, syncbits:00 fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0: parallel port found at 0x378 ppc0: using extended I/O port range ppc0: EPP SPP ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port fb: new array size 4 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <12 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio0: irq maps: 0x1 0x11 0x1 0x1 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x700ff fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff isa_probe_children: probing PnP devices unknown: <PNP0401> can't assign resources (port) unknown: <PNP0401> at port 0x378-0x37f on isa0 unknown: <PNP0501> can't assign resources (port) unknown: <PNP0501> at port 0x3f8-0x3ff on isa0 unknown: <Generic IRDA-compatible device> failed to probe on isa0 unknown: <PNP0700> can't assign resources (port) unknown: <PNP0700> at port 0x3f0-0x3f5 on isa0 sbc0: <ESS ES1869 (Compaq OEM)> at port 0x330-0x331,0x388-0x38b,0x220-0x22f irq 5 drq 5,1 on isa0 sbc0: [GIANT-LOCKED] pcm0: <ESS 18xx DSP> on sbc0 pcm0: ESS1869 detected, newspeed pcm0: [GIANT-LOCKED] pcm0: sndbuf_setmap ffe000, 1000; 0xc991c000 -> ffe000 pcm0: sndbuf_setmap ffd000, 1000; 0xc991d000 -> ffd000 unknown: <PNP0800> failed to probe at port 0x61 on isa0 unknown: <PNP0303> can't assign resources (port) unknown: <PNP0303> at port 0x60 on isa0 unknown: <PNP0f13> can't assign resources (irq) unknown: <PNP0f13> at irq 12 on isa0 unknown: <PNP0c02> can't assign resources (port) unknown: <PNP0c02> at port 0x4d0-0x4d1,0x260-0x263,0x100-0x107,0xe2-0xe3,0xe0-0xe1,0xa2-0xbf,0x93-0x9f,0x92,0x90-0x91,0x77,0x76,0x75,0x74,0x65-0x6f,0x62-0x63,0x44-0x5f,0x22-0x3f iomem 0xcb000-0xcbfff,0xfffc0000-0xffffffff on isa0 unknown: <PNP0e03> failed to probe at port 0x3e0-0x3e1 on isa0 Device configuration finished. TSC timecounter disabled: APM enabled. Timecounter "TSC" frequency 300011828 Hz quality -1000 Timecounters tick every 10.000 msec lo0: bpf attached ata0-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin ata0-master: setting PIO4 on Intel PIIX4 chip ata0-master: setting UDMA33 on Intel PIIX4 chip ad0: <IBM-DBCA-206480/BC4OA82F> ATA-4 disk at ata0-master ad0: 6194MB (12685680 sectors), 13424 C, 15 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA33 GEOM: new disk ad0 [0] f:80 typ:11 s(CHS):1/0/1 e(CHS):278/239/63 s:15120 l:4203360 [1] f:00 typ:18 s(CHS):0/1/1 e(CHS):0/239/63 s:63 l:15057 [2] f:00 typ:165 s(CHS):279/0/1 e(CHS):838/239/63 s:4218480 l:8467200 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad0s1, start 7741440 length 2152120320 end 2159861759 GEOM: Configure ad0s2, start 32256 length 7709184 end 7741439 GEOM: Configure ad0s3, start 2159861760 length 4335206400 end 6495068159 GEOM: Configure ad0s3a, start 0 length 134217728 end 134217727 GEOM: Configure ad0s3b, start 134217728 length 536870912 end 671088639 GEOM: Configure ad0s3c, start 0 length 4335206400 end 4335206399 GEOM: Configure ad0s3d, start 671088640 length 872415232 end 1543503871 GEOM: Configure ad0s3e, start 1543503872 length 134217728 end 1677721599 GEOM: Configure ad0s3f, start 1677721600 length 2657484800 end 4335206399 pccard1: CIS version PC Card Standard 5.0 pccard1: CIS info: Xircom, CreditCard 10/100, CE3-10/100, 1.00 pccard1: Manufacturer code 0x105, product 0x10a pccard1: function 0: network adapter, ccr addr 800 mask 3 pccard1: function 0, config table entry 1: I/O card; irq mask 8ebc; iomask 4, iospace 0-f; memspace 0-fff; mwait_required rdybsy_active io8 io16 irqpulse irqlevel powerdown xe0: <Xircom CreditCard 10/100> at port 0x100-0x10f irq 11 function 0 config 1 on pccard1 xe0: [GIANT-LOCKED] xe0: Xircom CreditCard 10/100, version 0x45/0x04, 100Mbps capable xe0: bpf attached xe0: Ethernet address: 00:80:c7:7a:d2:73 ata1-slave: FAILURE - ATAPI_IDENTIFY no interrupt ata1-slave: FAILURE - ATAPI_IDENTIFY no interrupt ata1-master: pio=0x0c wdma=0x22 udma=0xffffffff cable=40pin ATAPI_RESET time = 2910us ata1-master: setting PIO4 on Intel PIIX4 chip acd0: <UJDA150/1.02> CDROM drive at ata1 as master acd0: read 4134KB/s (4134KB/s), 128KB buffer, PIO4 acd0: Reads: CDR, CDRW, CDDA acd0: Writes: acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc Mounting root from ufs:/dev/ad0s3a start_init: trying /sbin/initReceived on Thu Sep 02 2004 - 14:16:45 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:10 UTC