Re: Sound oscillates after upgrade to kde3.3.

----- Mensaje original -----
De: Ion-Mihai Tetcu <itetcu_at_people.tecnik93.com>
Fecha: Miércoles, Septiembre 8, 2004 8:15 am
Asunto: Re: Sound oscillates after upgrade to kde3.3.

> On Tue, 07 Sep 2004 17:43:58 -0500
> eculp <eculp_at_prodigy.net.mx> wrote:
> 
> > 
> > 
> > ----- Mensaje original -----
> > De: Ion-Mihai Tetcu <itetcu_at_people.tecnik93.com>
> > Fecha: Martes, Septiembre 7, 2004 4:57 pm
> > Asunto: Re: Sound oscillates after upgrade to kde3.3.
> > 
> > > On Tue, 07 Sep 2004 16:42:25 -0500
> > > eculp <eculp_at_prodigy.net.mx> wrote:
> > > 
> > > > I'm using today's current and just finished a kde3.3 upgrade 
> > > following> the instructions in ports/UPDATING all the way down to
> > > > 
> > > > rm ~/.kde/share/config/knotifyrc
> > > > 
> > > > Although my problem isn't no sound but a high pitched 
> oscillation.> > > 
> > > > My sound is using the snd_via8233.ko loaded from the 
> loader.conf 
> > > which> also loads sound.ko.  The pciconf -lv shows:
> > > > 
> > > > pcm0_at_pci0:17:5: class=0x040100 card=0xa1011019 chip=0x30591106
> > > > rev=0x50 hdr=0x00
> > > >     vendor   = 'VIA Technologies Inc'
> > > >     device   = 'VT8233/33A/8235/8237 AC97 Enhanced Audio
> > > > Controller'
> > > >     class    = multimedia
> > > >     subclass = audio
> > > > 
> > > > I've tried disabling acpi with no change.  I'm runing kdm and it
> > > > starts at the end of the load cycle.
> > > > 
> > > > I have no idea if the problem is the OS or KDE.  Does anyone 
> have 
> > > any> troubleshooting suggestions?
> > > 
> > > pcm0_at_pci0:17:5: class=0x040100 card=0xa0021458 chip=0x30591106 
> > > rev=0x50hdr=0x00    vendor   = 'VIA Technologies Inc'
> > >    device   = 'VT8233/33A/8235/8237 AC97 Enhanced Audio 
> Controller'> >    class    = multimedia
> > >    subclass = audio
> > > 
> > > # cat /dev/sndstat
> > > FreeBSD Audio Driver (newpcm)
> > > Installed devices:
> > > pcm0: <VIA VT8235> at io 0xe400 irq 22 kld snd_via8233 (5p/1r/0v
> > > channels duplex default)
> > > 
> > > seems to be OK for xmms and mplayer. I'm building kde-multimedia
> > > now.
> > > 
> > Once I stop the oscillations in kde, it works great but I'm still
> > working on a system that doesn't miss and I've not been very
> > successful.  Basically I have to do a kldunload vo the via snd 
> driver.> 
> > Thanks for your response and let me know if you are using the same
> > driver and get it working without problems.
> 
> snd_via8233_load="YES" in loader.conf

It loads fine but my problems start when bringing up kde3.3.  I am suspecting Arts.  At the end it begins to oscillate and it is almost impossible to stop withoug a reboot. :(

Just so I don't get bored, I've got an problem with the snd_ich.ko that I have on one motherboard.  I now have no really workable sound.  This one is a problem in current, I think and not kde based but I'm so confused now that I'm not sure of anything;)

Thanks,

ed