Re: Current 9/10/2004, DVD problems

Following up on this, I now have the -current of 9/10/2004 at
about 18:00 GMT, but it still doesn't boot in normal mode.
Still hangs at the DVD probe.

Does still boot OK in verbose mode.

	-jr



On Aug 31, 19:35, J.R. Oldroyd wrote:
> Afraid not.
> 
> Just to confirm since my line numbers seem to be a few off yours...
> 
> I have:
> __FBSDID("$FreeBSD: src/sys/dev/ata/ata-lowlevel.c,v 1.46 2004/08/27 22:14:45 sos Exp $");
> 
> And after adding the extra call to ata_wait() there are now TWO ata_wait()s:
> 
> int
> ata_generic_command(struct ata_device *atadev, u_int8_t command,
>                     u_int64_t lba, u_int16_t count, u_int16_t feature)
> {
>     if (atadebug)
>         ata_prtdev(atadev, "ata_command: addr=%04lx, command=%02x, "
>                    "lba=%jd, count=%d, feature=%d\n",
>                    rman_get_start(atadev->channel->r_io[ATA_DATA].res),
>                    command, (intmax_t)lba, count, feature);
> 
>     /* ready to issue command ? */
>     if (ata_wait(atadev, 0) < 0) {
>         ata_prtdev(atadev, "timeout waiting for ready command=%02x\n", command);
>         return -1;
>     }
> 
>     /* select device */
>     ATA_IDX_OUTB(atadev->channel, ATA_DRIVE, ATA_D_IBM | atadev->unit);
> 
>     /* ready to issue command ? */
>     if (ata_wait(atadev, 0) < 0) {
>         ata_prtdev(atadev, "timeout sending command=%02x\n", command);
>         return -1;
>     }
>   
>     /* enable interrupt */
>     ATA_IDX_OUTB(atadev->channel, ATA_ALTSTAT, ATA_A_4BIT);
> 
> Same result.  Hangs at the CD probe with a normal boot.  Hangs also
> in verbose mode with a disc in.  Does boot in verbose mode with no
> disc in.
> 
> 	-jr
> 
> 
> 
> On Aug 31, 22:23, Søren Schmidt wrote:
> > J.R. Oldroyd wrote:
> > >Some follow-up.
> > >
> > >Similar to other folks with this problem, the system will boot in
> > >verbose mode.  However, ONLY with no medium.  If medium is present,
> > >it still hangs.  If the tray is empty, it will boot in either DMA or
> > >PIO mode.  And if I then insert a disc, I can read it OK.
> > 
> > Hmm does the attached patch change behavior in any way ?
> > 
> > -Søren
> 
> > Index: ata-lowlevel.c
> > ===================================================================
> > RCS file: /home/ncvs/src/sys/dev/ata/ata-lowlevel.c,v
> > retrieving revision 1.44
> > diff -u -r1.44 ata-lowlevel.c
> > --- ata-lowlevel.c	16 Aug 2004 09:32:35 -0000	1.44
> > +++ ata-lowlevel.c	24 Aug 2004 07:25:32 -0000
> > _at__at_ -721,6 +721,12 _at__at_
> >  		   rman_get_start(atadev->channel->r_io[ATA_DATA].res), 
> >  		   command, (intmax_t)lba, count, feature);
> >  
> > +    /* ready to issue command ? */
> > +    if (ata_wait(atadev, 0) < 0) { 
> > +	ata_prtdev(atadev, "timeout waiting for ready command=%02x\n", command);
> > +	return -1;
> > +    }
> > +
> >      /* select device */
> >      ATA_IDX_OUTB(atadev->channel, ATA_DRIVE, ATA_D_IBM | atadev->unit);
> >  
> 
> _______________________________________________
> freebsd-current_at_freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-current
> To unsubscribe, send any mail to "freebsd-current-unsubscribe_at_freebsd.org"