I get rl0: watchdog timeout on a machine where i track RELENG_5. The problem goes away if I disable acpi. It seems that this was fixed for a couple of other people. cvsupped today again but the problem still exists for me. Here is the verbose dmesg: Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.3-BETA3 #2: Fri Sep 10 15:11:12 CEST 2004 Shoe_at_yesterday.pepperland:/usr/obj/usr/src/sys/YESTERDAY WARNING: WITNESS option enabled, expect reduced performance. Preloaded elf kernel "/boot/kernel/kernel" at 0xc0896000. Preloaded elf module "/boot/kernel/linux.ko" at 0xc0896200. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc08962ac. Calibrating clock(s) ... i8254 clock: 1193209 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 651484460 Hz CPU: Intel Pentium III (651.48-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x683 Stepping = 3 Features=0x387f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE> real memory = 402587648 (383 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000c29000 - 0x00000000178fffff, 382562304 bytes (93399 pages) avail memory = 384270336 (366 MB) bios32: Found BIOS32 Service Directory header at 0xc00fad40 bios32: Entry = 0xfb240 (c00fb240) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0xb270 pnpbios: Found PnP BIOS data at 0xc00fbf80 pnpbios: Entry = f0000:bfa8 Rev = 1.0 Other BIOS signatures found: io: <I/O> null: <null device, zero device> random: <entropy source, Software, Yarrow> mem: <memory> Pentium Pro MTRR support enabled npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <VIA692 AWRDACPI> on motherboard acpi0: [MPSAFE] pci_open(1): mode 1 addr port (0x0cf8) is 0x80003840 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=06911106) pcibios: BIOS version 2.10 Found $PIR table, 7 entries at 0xc00fde60 PCI-Only Interrupts: 5 10 11 Location Bus Device Pin Link IRQs slot 1 0 9 A 0x01 3 4 5 7 9 10 11 12 14 15 slot 1 0 9 B 0x02 3 4 5 7 9 10 11 12 14 15 slot 1 0 9 C 0x03 3 4 5 7 9 10 11 12 14 15 slot 1 0 9 D 0x05 3 4 5 7 9 10 11 12 14 15 slot 2 0 10 A 0x02 3 4 5 7 9 10 11 12 14 15 slot 2 0 10 B 0x03 3 4 5 7 9 10 11 12 14 15 slot 2 0 10 C 0x05 3 4 5 7 9 10 11 12 14 15 slot 2 0 10 D 0x01 3 4 5 7 9 10 11 12 14 15 slot 3 0 11 A 0x03 3 4 5 7 9 10 11 12 14 15 slot 3 0 11 B 0x05 3 4 5 7 9 10 11 12 14 15 slot 3 0 11 C 0x01 3 4 5 7 9 10 11 12 14 15 slot 3 0 11 D 0x02 3 4 5 7 9 10 11 12 14 15 slot 4 0 12 A 0x05 3 4 5 7 9 10 11 12 14 15 slot 4 0 12 B 0x01 3 4 5 7 9 10 11 12 14 15 slot 4 0 12 C 0x02 3 4 5 7 9 10 11 12 14 15 slot 4 0 12 D 0x03 3 4 5 7 9 10 11 12 14 15 slot 5 0 13 A 0x05 3 4 5 7 9 10 11 12 14 15 slot 5 0 13 B 0x03 3 4 5 7 9 10 11 12 14 15 slot 5 0 13 C 0x02 3 4 5 7 9 10 11 12 14 15 slot 5 0 13 D 0x01 3 4 5 7 9 10 11 12 14 15 embedded 0 1 A 0x01 3 4 5 7 9 10 11 12 14 15 embedded 0 1 B 0x02 3 4 5 7 9 10 11 12 14 15 embedded 0 1 C 0x03 3 4 5 7 9 10 11 12 14 15 embedded 0 1 D 0x05 3 4 5 7 9 10 11 12 14 15 embedded 0 7 C 0x03 3 4 5 7 9 10 11 12 14 15 embedded 0 7 D 0x05 3 4 5 7 9 10 11 12 14 15 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 0 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 7 func 0 acpi0: Power Button (fixed) ACPI timer looks BAD min = 1, max = 6, width = 5 ACPI timer looks GOOD min = 1, max = 2, width = 1 ACPI timer looks GOOD min = 1, max = 2, width = 1 ACPI timer looks GOOD min = 1, max = 2, width = 1 ACPI timer looks GOOD min = 1, max = 2, width = 1 ACPI timer looks GOOD min = 1, max = 2, width = 1 ACPI timer looks GOOD min = 1, max = 2, width = 1 ACPI timer looks GOOD min = 1, max = 2, width = 1 ACPI timer looks GOOD min = 1, max = 2, width = 1 ACPI timer looks GOOD min = 1, max = 2, width = 1 Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 cpu0: <ACPI CPU (3 Cx states)> on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0x5000-0x500f,0x4080-0x40ff,0x4000-0x407f,0xcf8-0xcff on acpi0 acpi link get: empty IRQ resource ACPI PCI link initial configuration: \\_SB_.PCI0.ISA_.LNKA irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 11+ low,level,sharable 0.9.0 \\_SB_.PCI0.ISA_.LNKB irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 5+ low,level,sharable 0.9.1 \\_SB_.PCI0.ISA_.LNKC irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 0+ low,level,sharable 0.9.2 \\_SB_.PCI0.ISA_.LNKD irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 10+ low,level,sharable 0.9.3 \\_SB_.PCI0.ISA_.LNKB irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 5+ low,level,sharable 0.10.0 \\_SB_.PCI0.ISA_.LNKC irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 0+ low,level,sharable 0.10.1 \\_SB_.PCI0.ISA_.LNKD irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 10+ low,level,sharable 0.10.2 \\_SB_.PCI0.ISA_.LNKA irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 11+ low,level,sharable 0.10.3 \\_SB_.PCI0.ISA_.LNKC irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 0+ low,level,sharable 0.11.0 \\_SB_.PCI0.ISA_.LNKD irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 10+ low,level,sharable 0.11.1 \\_SB_.PCI0.ISA_.LNKA irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 11+ low,level,sharable 0.11.2 \\_SB_.PCI0.ISA_.LNKB irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 5+ low,level,sharable 0.11.3 \\_SB_.PCI0.ISA_.LNKD irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 10+ low,level,sharable 0.12.0 \\_SB_.PCI0.ISA_.LNKA irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 11+ low,level,sharable 0.12.1 \\_SB_.PCI0.ISA_.LNKB irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 5+ low,level,sharable 0.12.2 \\_SB_.PCI0.ISA_.LNKC irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 0+ low,level,sharable 0.12.3 \\_SB_.PCI0.ISA_.LNKD irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 10+ low,level,sharable 0.13.0 \\_SB_.PCI0.ISA_.LNKC irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 0+ low,level,sharable 0.13.1 \\_SB_.PCI0.ISA_.LNKB irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 5+ low,level,sharable 0.13.2 \\_SB_.PCI0.ISA_.LNKA irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 11+ low,level,sharable 0.13.3 \\_SB_.PCI0.ISA_.LNKA irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 11+ low,level,sharable 0.7.0 \\_SB_.PCI0.ISA_.LNKB irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 5+ low,level,sharable 0.7.1 \\_SB_.PCI0.ISA_.LNKC irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 0+ low,level,sharable 0.7.2 \\_SB_.PCI0.ISA_.LNKD irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 10+ low,level,sharable 0.7.3 \\_SB_.PCI0.ISA_.LNKA irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 11+ low,level,sharable 0.1.0 \\_SB_.PCI0.ISA_.LNKB irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 5+ low,level,sharable 0.1.1 \\_SB_.PCI0.ISA_.LNKC irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 0+ low,level,sharable 0.1.2 \\_SB_.PCI0.ISA_.LNKD irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 10+ low,level,sharable 0.1.3 pci0: <ACPI PCI bus> on pcib0 pci0: physical bus=0 map[10]: type 3, range 32, base d8000000, size 26, enabled found-> vendor=0x1106, dev=0x0691, revid=0x44 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1106, dev=0x8598, revid=0x00 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x2230, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns) found-> vendor=0x1106, dev=0x0596, revid=0x23 bus=0, slot=7, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0087, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 0000e000, size 4, enabled found-> vendor=0x1106, dev=0x0571, revid=0x10 bus=0, slot=7, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 map[20]: type 4, range 32, base 0000e400, size 5, enabled pcib0: matched entry for 0.7.INTD (src \\_SB_.PCI0.ISA_.LNKD) pcib0: possible interrupts: 1 3 4 5 6 7 10 11 12 14 15 ACPI PCI link arbitrated settings: \\_SB_.PCI0.ISA_.LNKA (references 7, priority 145173): interrupts: 11 10 5 12 7 6 4 3 15 14 1 penalty: 280 280 330 5280 5280 5280 5280 5280 50280 50280100280 \\_SB_.PCI0.ISA_.LNKB (references 7, priority 145173): interrupts: 11 10 5 12 7 6 4 3 15 14 1 penalty: 280 280 330 5280 5280 5280 5280 5280 50280 50280100280 \\_SB_.PCI0.ISA_.LNKC (references 7, priority 145173): interrupts: 11 10 5 12 7 6 4 3 15 14 1 penalty: 280 280 330 5280 5280 5280 5280 5280 50280 50280100280 \\_SB_.PCI0.ISA_.LNKD (references 7, priority 145173): interrupts: 11 10 5 12 7 6 4 3 15 14 1 penalty: 280 280 330 5280 5280 5280 5280 5280 50280 50280100280 pcib0: slot 7 INTD routed to irq 10 via \\_SB_.PCI0.ISA_.LNKD found-> vendor=0x1106, dev=0x3038, revid=0x11 bus=0, slot=7, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=10 powerspec 2 supports D0 D3 current D0 found-> vendor=0x1106, dev=0x3050, revid=0x30 bus=0, slot=7, func=3 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 4, range 32, base 0000e800, size 8, enabled map[14]: type 1, range 32, base df000000, size 8, enabled pcib0: matched entry for 0.10.INTA (src \\_SB_.PCI0.ISA_.LNKB) pcib0: possible interrupts: 1 3 4 5 6 7 10 11 12 14 15 ACPI PCI link arbitrated settings: \\_SB_.PCI0.ISA_.LNKA (references 7, priority 147178): interrupts: 11 5 10 12 7 6 4 3 15 14 1 penalty: 560 610 630 5560 5560 5560 5560 5560 50560 50560100560 \\_SB_.PCI0.ISA_.LNKB (references 7, priority 147178): interrupts: 11 5 10 12 7 6 4 3 15 14 1 penalty: 560 610 630 5560 5560 5560 5560 5560 50560 50560100560 \\_SB_.PCI0.ISA_.LNKC (references 7, priority 147178): interrupts: 11 5 10 12 7 6 4 3 15 14 1 penalty: 560 610 630 5560 5560 5560 5560 5560 50560 50560100560 pcib0: slot 10 INTA routed to irq 5 via \\_SB_.PCI0.ISA_.LNKB found-> vendor=0x10ec, dev=0x8139, revid=0x10 bus=0, slot=10, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns) intpin=a, irq=5 map[10]: type 4, range 32, base 0000ec00, size 8, enabled pcib0: matched entry for 0.13.INTA (src \\_SB_.PCI0.ISA_.LNKD) pcib0: slot 13 INTA is already routed to irq 10 found-> vendor=0x13f6, dev=0x0111, revid=0x10 bus=0, slot=13, func=0 class=04-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x18 (6000 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 agp0: <VIA 82C691 (Apollo Pro) host to PCI bridge> mem 0xd8000000-0xdbffffff at device 0.0 on pci0 agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xd8000000 agp0: allocating GATT for aperture of size 256M pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xf000-0xfff pcib1: memory decode 0xdc000000-0xddffffff pcib1: prefetched decode 0xd0000000-0xd7ffffff pci1: <PCI bus> on pcib1 pci1: physical bus=1 map[10]: type 1, range 32, base dc000000, size 24, enabled pcib1: device (null) requested decoded memory range 0xdc000000-0xdcffffff map[14]: type 3, range 32, base d0000000, size 27, enabled pcib1: device (null) requested decoded memory range 0xd0000000-0xd7ffffff pcib0: matched entry for 0.1.INTA (src \\_SB_.PCI0.ISA_.LNKA) pcib0: possible interrupts: 1 3 4 5 6 7 10 11 12 14 15 ACPI PCI link arbitrated settings: \\_SB_.PCI0.ISA_.LNKA (references 7, priority 149182): interrupts: 11 10 5 12 7 6 4 3 15 14 1 penalty: 840 910 960 5840 5840 5840 5840 5840 50840 50840100840 \\_SB_.PCI0.ISA_.LNKC (references 7, priority 149182): interrupts: 11 10 5 12 7 6 4 3 15 14 1 penalty: 840 910 960 5840 5840 5840 5840 5840 50840 50840100840 pcib0: slot 1 INTA routed to irq 11 via \\_SB_.PCI0.ISA_.LNKA pcib1: slot 0 INTA is routed to irq 11 found-> vendor=0x10de, dev=0x0111, revid=0xb2 bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 pci1: <display, VGA> at device 0.0 (no driver attached) isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <VIA 82C596B UDMA66 controller> port 0xe000-0xe00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xe000 ata0: channel #0 on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata0: [MPSAFE] ata1: channel #1 on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=50 ostat1=50 ata1-master: stat=0xd0 err=0x00 lsb=0x0e msb=0x00 ata1-master: stat=0xd0 err=0x00 lsb=0x0e msb=0x00 ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb ata1-slave: stat=0x10 err=0x01 lsb=0x14 msb=0xeb ata1: reset tp2 stat0=00 stat1=10 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER> ata1: [MPSAFE] uhci0: <VIA 83C572 USB controller> port 0xe400-0xe41f irq 10 at device 7.2 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xe400 uhci0: [GIANT-LOCKED] usb0: <VIA 83C572 USB controller> on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pci0: <bridge, HOST-PCI> at device 7.3 (no driver attached) rl0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xe800 rl0: <RealTek 8139 10/100BaseTX> port 0xe800-0xe8ff mem 0xdf000000-0xdf0000ff irq 5 at device 10.0 on pci0 miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: bpf attached rl0: Ethernet address: 00:50:fc:1e:52:9f rl0: [MPSAFE] pci0: <multimedia, audio> at device 13.0 (no driver attached) fdc0: <floppy drive controller> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0: irq maps: 0x3 0x13 0x3 0x3 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A sio1: irq maps: 0x3 0xb 0x3 0x3 sio1 port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A unknown: not probed (disabled) unknown: not probed (disabled) ppc0: using extended I/O port range ppc0: ECP SPP ECP+EPP SPP ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/16 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 plip0: bpf attached lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 psmcpnp0 irq 12 on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 atkbd0: [GIANT-LOCKED] psm0: current command byte:0047 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000008, packet size:3 psm0: syncmask:c0, syncbits:00 unknown: not probed (disabled) unknown: not probed (disabled) ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it fdc: fdc0 already exists; skipping it ppc: ppc0 already exists; skipping it sio: sio0 already exists; skipping it sio: sio1 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 54 80 bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. procfs registered Timecounter "TSC" frequency 651484460 Hz quality 800 Timecounters tick every 10.000 msec Linux ELF exec handler installed lo0: bpf attached cpu0: set speed to 100.0% acpi_cpu: throttling enabled, 2 steps (100% to 50.0%), currently 100.0% ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin ata0-master: setting PIO4 on VIA 82C596B chip ata0-master: setting UDMA66 on VIA 82C596B chip ad0: <IC35L060AVER07-0/ER6OA46A> ATA-5 disk at ata0-master ad0: 58644MB (120103200 sectors), 119150 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA66 GEOM: new disk ad0 ar: FreeBSD check1 failed ata1-slave: pio=0x0c wdma=0x22 udma=0x42 cable=40pin ATAPI_RESET time = 60us ata1-master: pio=0x0b wdma=0x21 udma=0xffffffff cable=40pin ATAPI_RESET time = 210us ata1-master: setting PIO3 on VIA 82C596B chip ata1-slave: setting PIO4 on VIA 82C596B chip ata1-slave: setting UDMA33 on VIA 82C596B chip acd0: <CR-4804TE/3.0D> CDRW drive at ata1 as master acd0: read 4134KB/s (4134KB/s) write 689KB/s (689KB/s), 2048KB buffer, PIO3 acd0: Reads: CDR, CDRW, CDDA stream, packet acd0: Writes: CDR, CDRW, test write acd0: Audio: play, 2 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc acd1: <LITEON DVD-ROM LTD122/IL6J> DVDROM drive at ata1 as slave acd1: 512KB buffer, UDMA33 acd1: Reads: CDR, CDRW, CDDA stream, DVDROM, packet acd1: Writes: acd1: Audio: play, 255 volume levels acd1: Mechanism: ejectable tray, unlocked acd1: Medium: no/blank disc [0] f:80 typ:7 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:36210447 [1] f:00 typ:165 s(CHS):1023/0/1 e(CHS):1023/254/63 s:36210510 l:25157790 [2] f:00 typ:165 s(CHS):1023/0/1 e(CHS):1023/254/63 s:61368300 l:58733640 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad0s1, start 32256 length 18539748864 end 18539781119 GEOM: Configure ad0s2, start 18539781120 length 12880788480 end 31420569599 GEOM: Configure ad0s3, start 31420569600 length 30071623680 end 61492193279 GEOM: Configure ad0s2a, start 0 length 268435456 end 268435455 GEOM: Configure ad0s2b, start 268435456 length 783785984 end 1052221439 GEOM: Configure ad0s2c, start 0 length 12880788480 end 12880788479 GEOM: Configure ad0s2d, start 1052221440 length 268435456 end 1320656895 GEOM: Configure ad0s2e, start 1320656896 length 268435456 end 1589092351 GEOM: Configure ad0s2f, start 1589092352 length 11291696128 end 12880788479 GEOM: Configure ad0s3c, start 0 length 30071623680 end 30071623679 Mounting root from ufs:/dev/ad0s2a start_init: trying /sbin/init rl0: watchdog timeout rl0: watchdog timeout rl0: watchdog timeout rl0: watchdog timeout rl0: watchdog timeout rl0: watchdog timeout rl0: watchdog timeout rl0: watchdog timeout rl0: watchdog timeout rl0: watchdog timeout rl0: watchdog timeout rl0: watchdog timeout rl0: watchdog timeout rl0: watchdog timeout rl0: watchdog timeout rl0: watchdog timeout rl0: watchdog timeoutReceived on Fri Sep 10 2004 - 15:32:53 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:11 UTC