Re: ISDN4BSD broken...

Hello all,

there's still no change - ISDN4BSD still does not work with my TELES S0 
16.3 ISA-Card (no PnP).

I tried with 6-CURRENT from Sep 10, which has the new commits for 
ISDN4BSD from andre_at_freebsd.org, but this did not change anything.
(thanks for the hint, Gary!)

The last working Version is from Aug 11, 14:00 UTC - at 16:00 UTC it's 
broken.

The kernel files which changed in between are:

src/sys/dev/acpica/acpi_pci_link.c (-> 1.19)
src/sys/dev/acpica/acpi_pcib.c (-> 1.47)
src/sys/dev/acpica/acpi_pcib_acpi.c (-> 1.39)
src/sys/dev/acpica/acpi_pcib_pci.c (-> 1.10)
src/sys/dev/acpica/acpi_pcibvar.h (-> 1.3)

That's all I can do for now - if additional informations are required, 
please contact me and tell me how to retrieve them...

Ciao/BSD - Matthias

On Saturday 21 August 2004 19:27, Matthias Schuendehuette wrote:
> Hi,
>
> there's still no change with 5.3-BETA1 :-(
>
> On Saturday 14 August 2004 18:54, Matthias Schuendehuette wrote:
> > Hi all,
> >
> > I just rebooted into the new cuurent-kernel and found, that i4b
> > isn't working any more. Last working kernel was of Aug 11, around
> > 1800 UTC.
> >
> > Aug 14 18:19:46 current kernel: FreeBSD 5.2-CURRENT #0: \
> >  Sat Aug 14 17:43:56 CEST 2004
> > [...]
> > Aug 14 18:19:46 current kernel: ACPI link \_SB_.PCI0.LNKA \
> >  has invalid initial irq 9, ignoring
> > (this is a new message, which doesn't show up with my Aug 11
> > kernel) [...]
> > Aug 14 18:19:46 current kernel: isic0: [GIANT-LOCKED]
> > Aug 14 18:19:46 current kernel: isic0 at port \
> >  0x580-0x59f,0x180-0x19f,0x980-0x99f,0xd80-0xd9f \
> >  irq 10 flags 0x3 on isa0
> > Aug 14 18:19:46 current kernel: isic0: passive stack unit 0
> > Aug 14 18:19:46 current kernel: isic0: Teles S0/16.3
> > [...]
> > Aug 14 18:19:46 current kernel: i4bisppp: \
> >  2 ISDN SyncPPP device(s) attached
> > Aug 14 18:19:46 current kernel: i4b: \
> >  ISDN call control device attached
> > Aug 14 18:19:46 current kernel: i4btrc: \
> >  1 ISDN trace device(s) attached
> > Aug 14 18:19:46 current kernel: i4brbch: \
> >  2 raw B channel access device(s) attached
> > Aug 14 18:19:46 current kernel: i4btel: \
> >  2 ISDN telephony interface device(s) attached
> > Aug 14 18:19:46 current kernel: i4bipr: \
> >  2 IP over raw HDLC ISDN device(s) attached (VJ header compression)
> > Aug 14 18:19:46 current kernel: i4bctl: \
> >  ISDN system control port attached
> >
> > So far, the ISDN-Card is detected and attached as usual, but if I
> > try to dial out, the following messages were recorded:
> >
> > Aug 14 18:22:25 current kernel: i4b-L1 timer3_expired: \
> >  state = F4 Awaiting Signal
> > Aug 14 18:22:25 current kernel: i4b-L1 isic_recover: \
> >  HSCX B: ISTA = 0x0
> > Aug 14 18:22:25 current kernel: i4b-L1 isic_recover: \
> >    ISAC: ISTA = 0x94
> > Aug 14 18:22:25 current kernel: i4b-L1 isic_recover: \
> >    ISAC: CISQ = 0x1e
> > Aug 14 18:22:25 current kernel: i4b-L1 isic_recover: \
> >  HSCX B: IMASK = 0xff
> > Aug 14 18:22:25 current kernel: i4b-L1 isic_recover: \
> >  HSCX A: IMASK = 0xf8
> > Aug 14 18:22:25 current kernel: i4b-L1 isic_recover: \
> >    ISAC: IMASK = 0x2a
> > Aug 14 18:22:25 current kernel: i4b-L2 i4b_T202_timeout: \
> >  unit 0, N202 = 3
> > Aug 14 18:22:25 current kernel: i4b-L1 isic_ph_data_req: \
> >  still in state F3!
> > Aug 14 18:22:27 current kernel: i4b-L3 T303_timeout: \
> >  SETUP not answered, cr = 15
> > Aug 14 18:22:27 current kernel: i4b-L3 next_l3state: \
> >  FSM illegal state, state = ST_OW - Out Wait EST, \
> >  event = EV_T303EXP - T303 timeout!
> > Aug 14 18:22:27 current kernel: i4b-L1 timer3_expired: \
> >  state = F4 Awaiting Signal
> > Aug 14 18:22:27 current kernel: i4b-L1 isic_recover: \
> >  HSCX B: ISTA = 0x0
> > Aug 14 18:22:27 current kernel: i4b-L1 isic_recover: \
> >    ISAC: ISTA = 0x4
> > Aug 14 18:22:27 current kernel: i4b-L1 isic_recover: \
> >    ISAC: CISQ = 0x32
> > Aug 14 18:22:27 current kernel: i4b-L1 isic_recover: \
> >  HSCX B: IMASK = 0xff
> > Aug 14 18:22:27 current kernel: i4b-L1 isic_recover: \
> >  HSCX A: IMASK = 0xf8
> > Aug 14 18:22:27 current kernel: i4b-L1 isic_recover: \
> >    ISAC: IMASK = 0x2a
> >
> > Any ideas? ACPI or IRQ-Routing related?

-- 
Ciao/BSD - Matthias

Matthias Schuendehuette <msch [at] snafu.de>, Berlin (Germany)
PGP-Key at <pgp.mit.edu> and <wwwkeys.de.pgp.net> ID: 0xDDFB0A5F