Forgot to mention I'm running -CURRENT as of a couple hours ago and I am now seeing the rcorder core dump also as mentioned in another thread. -----Original Message----- From: owner-freebsd-current_at_freebsd.org [mailto:owner-freebsd-current_at_freebsd.org] On Behalf Of Grover Lines Sent: Tuesday, September 14, 2004 2:46 PM To: freebsd-current_at_freebsd.org Subject: RE: ad0: TIMEOUT - READ_DMA retrying (2 retries left) LBA=207594611 I'm getting these messages also and I'm not using mpsafenet=0. This is the only error I'm getting also. I'm running on a p4 with a via P4xbsa board. I just started getting these errors about the same time they changed the default scheduler to 4BSD. I rebuild daily so .... Anyway I still get these messages using sched_ule for a scheduler so I don't know if that has anything to do with it. -- Grover Lines -----Original Message----- From: owner-freebsd-current_at_freebsd.org [mailto:owner-freebsd-current_at_freebsd.org] On Behalf Of FUJITA Kazutoshi Sent: Tuesday, September 14, 2004 10:14 AM To: freebsd-current_at_freebsd.org Subject: ad0: TIMEOUT - READ_DMA retrying (2 retries left) LBA=207594611 Hi, My 6.0-CURRENT box says, such as ad0: TIMEOUT - READ_DMA retrying (2 retries left) LBA=207594611 ad0: WARNING - READ_DMA no interrupt but good status I replaced the ad0 with brand-new HDD, but I still got same messages. The box has 3 HDDs(ad0,ad1,ad3) and DVD(acd0) drive, but the messages comes only from ad0. What is happening? Cable problem or ATA controller problem? Regards, Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.0-CURRENT #4: Sun Sep 12 08:19:34 JST 2004 fujita_at_faithia:/usr/obj/usr/src/sys/FAITHIA WARNING: debug.mpsafenet forced to 0 as ipsec requires Giant WARNING: MPSAFE network stack disabled, expect reduced performance. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) 4 CPU 2.00GHz (2000.08-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf24 Stepping = 4 Features=0x3febf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV ,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM> real memory = 536805376 (511 MB) avail memory = 515616768 (491 MB) npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <AMIINT SiS645XX> on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: <ACPI CPU (3 Cx states)> on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <SiS 650 host to AGP bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 drm0: <ATI Radeon QW RV200 7500> port 0x9800-0x98ff mem 0xdfdf0000-0xdfdfffff,0xd0000000-0xd7ffffff at device 0.0 on pci1 info: [drm] AGP at 0xe0000000 64MB info: [drm] Initialized radeon 1.11.0 20020828 on minor 0 isab0: <PCI-ISA bridge> at device 2.0 on pci0 isa0: <ISA bus> on isab0 ohci0: <SiS 5571 USB controller> mem 0xdfffe000-0xdfffefff irq 11 at device 2.2 on pci0 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: <SiS 5571 USB controller> on ohci0 usb0: USB revision 1.0 uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 3 ports with 3 removable, self powered ohci1: <SiS 5571 USB controller> mem 0xdffff000-0xdfffffff irq 5 at device 2.3 on pci0 ohci1: [GIANT-LOCKED] usb1: OHCI version 1.0, legacy support usb1: <SiS 5571 USB controller> on ohci1 usb1: USB revision 1.0 uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 3 ports with 3 removable, self powered atapci0: <SiS 961 UDMA100 controller> port 0xff00-0xff0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 2.5 on pci0 ata0: channel #0 on atapci0 ata1: channel #1 on atapci0 pcm0: <SiS 7012> port 0xd800-0xd87f,0xdc00-0xdcff irq 11 at device 2.7 on pci0 pcm0: [GIANT-LOCKED] pcm0: <C-Media Electronics CMI9738 AC97 Codec> sis0: <SiS 900 10/100BaseTX> port 0xd400-0xd4ff mem 0xdfff9000-0xdfff9fff irq 5 at device 3.0 on pci0 miibus0: <MII bus> on sis0 rlphy0: <RTL8201L 10/100 media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto sis0: Ethernet address: 00:07:95:c0:de:e2 sis0: [GIANT-LOCKED] fwohci0: <VIA Fire II (VT6306)> port 0xd000-0xd07f mem 0xdfff8800-0xdfff8fff irq 5 at device 9.0 on pci0 fwohci0: [GIANT-LOCKED] fwohci0: OHCI version 1.0 (ROM=1) fwohci0: No. of Isochronous channels is 8. fwohci0: EUI64 00:40:26:01:06:04:21:f1 fwohci0: Phy 1394a available S400, 3 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:40:26:04:21:f1 fwe0: Ethernet address: 02:40:26:04:21:f1 fwip0: <IP over FireWire> on firewire0 fwip0: Firewire address: 00:40:26:01:06:04:21:f1 _at_ 0xfffe00000000, S400, maxrec 2048 sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port 0xcc00-0xcc3f mem 0xdff80000-0xdff9ffff,0xdffa0000-0xdffbffff irq 11 at device 10.0 on pci0 em0: [GIANT-LOCKED] em0: Ethernet address: 00:07:e9:00:f1:4d em0: Speed:N/A Duplex:N/A fxp0: <Intel 82550 Pro/100 Ethernet> port 0xc800-0xc83f mem 0xdff40000-0xdff5ffff,0xdfffd000-0xdfffdfff irq 5 at device 11.0 on pci0 miibus1: <MII bus> on fxp0 inphy0: <i82555 10/100 media interface> on miibus1 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: Ethernet address: 00:02:b3:a6:83:2d fxp0: [GIANT-LOCKED] ohci2: <NEC uPD 9210 USB controller> mem 0xdfffa000-0xdfffafff irq 11 at device 12.0 on pci0 ohci2: [GIANT-LOCKED] usb2: OHCI version 1.0 usb2: <NEC uPD 9210 USB controller> on ohci2 usb2: USB revision 1.0 uhub2: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 3 ports with 3 removable, self powered ohci3: <NEC uPD 9210 USB controller> mem 0xdfffb000-0xdfffbfff irq 5 at device 12.1 on pci0 ohci3: [GIANT-LOCKED] usb3: OHCI version 1.0 usb3: <NEC uPD 9210 USB controller> on ohci3 usb3: USB revision 1.0 uhub3: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered ehci0: <NEC uPD 720100 USB 2.0 controller> mem 0xdfffcf00-0xdfffcfff irq 11 at device 12.2 on pci0 ehci0: [GIANT-LOCKED] ehci_pci_attach: companion usb2 ehci_pci_attach: companion usb3 usb4: EHCI version 0.95 usb4: companion controllers, 3 ports each: usb2 usb3 usb4: <NEC uPD 720100 USB 2.0 controller> on ehci0 usb4: USB revision 2.0 uhub4: NEC EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub4: 5 ports with 5 removable, self powered acpi_button1: <Sleep Button> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model IntelliMouse Explorer, device ID 4 fdc0: <floppy drive controller> port 0x3f7,0x3f4-0x3f5,0x3f2-0x3f3 irq 6 drq 2 on acpi0 fdc0: does not respond device_attach: fdc0 attach returned 6 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A sio1 port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0 ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/16 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 fdc0: <floppy drive controller> port 0x3f7,0x3f4-0x3f5,0x3f2-0x3f3 irq 6 drq 2 on acpi0 fdc0: does not respond device_attach: fdc0 attach returned 6 orm0: <ISA Option ROMs> at iomem 0xcf000-0xd4fff,0xcd800-0xcefff,0xcc000-0xcd7ff,0xc0000-0xcbfff on isa0 pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 2000083456 Hz quality 800 Timecounters tick every 10.000 msec IPsec: Initialized Security Association Processing. pid 25: corrected slot count (0->1) ad0: 117800MB <HDS722512VLAT80/V33OA6EA> [239340/16/63] at ata0-master UDMA100 ad1: 39266MB <IC35L040AVER07-0/ER4OA44A> [79780/16/63] at ata0-slave UDMA100 ATAPI_RESET time = 70us acd0: DVDR <MATSHITADVD-RAM SW-9571/A109> at ata1-master UDMA66 ad3: 176700MB <IC35L180AVV207-1/V26OA66A> [359010/16/63] at ata1-slave UDMA100 cd0 at ata1 bus 0 target 0 lun 0 cd0: <MATSHITA DVD-RAM SW-9571 A109> Removable CD-ROM SCSI-0 device cd0: 66.000MB/s transfers cd0: cd present [2236704 x 2048 byte records] Mounting root from ufs:/dev/ad0s1a fxp0: Microcode loaded, int_delay: 1000 usec bundle_max: 6 fxp0: Microcode loaded, int_delay: 1000 usec bundle_max: 6 em0: Link is up 100 Mbps Full Duplex Accounting enabled ad0: TIMEOUT - READ_DMA retrying (2 retries left) LBA=93547835 ad0: WARNING - READ_DMA no interrupt but good status ad0: TIMEOUT - READ_DMA retrying (2 retries left) LBA=222272571 ad0: WARNING - READ_DMA no interrupt but good status ad0: TIMEOUT - READ_DMA retrying (2 retries left) LBA=226788623 ad0: WARNING - READ_DMA no interrupt but good status ad0: TIMEOUT - READ_DMA retrying (2 retries left) LBA=229423379 ad0: WARNING - READ_DMA no interrupt but good status ad0: TIMEOUT - WRITE_DMA retrying (2 retries left) LBA=46139535 ad0: WARNING - WRITE_DMA no interrupt but good status ad0: TIMEOUT - READ_DMA retrying (2 retries left) LBA=54042843 ad0: WARNING - READ_DMA no interrupt but good status ad0: TIMEOUT - READ_DMA retrying (2 retries left) LBA=64945143 ad0: WARNING - READ_DMA no interrupt but good status ad0: TIMEOUT - READ_DMA retrying (2 retries left) LBA=110871947 ad0: WARNING - READ_DMA no interrupt but good status ad0: TIMEOUT - READ_DMA retrying (2 retries left) LBA=198562163 ad0: WARNING - READ_DMA no interrupt but good status ad0: TIMEOUT - READ_DMA retrying (2 retries left) LBA=203078227 ad0: WARNING - READ_DMA no interrupt but good status ad0: TIMEOUT - WRITE_DMA retrying (2 retries left) LBA=16707487 ad0: WARNING - WRITE_DMA no interrupt but good status ad0: TIMEOUT - READ_DMA retrying (2 retries left) LBA=186518883 ad0: WARNING - READ_DMA no interrupt but good status ad0: TIMEOUT - READ_DMA retrying (2 retries left) LBA=197809407 ad0: WARNING - READ_DMA no interrupt but good status ad0: TIMEOUT - READ_DMA retrying (2 retries left) LBA=207594611 ad0: WARNING - READ_DMA no interrupt but good status ad0: TIMEOUT - READ_DMA retrying (2 retries left) LBA=171097435 ad0: WARNING - READ_DMA no interrupt but good status _______________________________________________ freebsd-current_at_freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "freebsd-current-unsubscribe_at_freebsd.org" _______________________________________________ freebsd-current_at_freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "freebsd-current-unsubscribe_at_freebsd.org"Received on Tue Sep 14 2004 - 19:54:13 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:12 UTC