Hi, The same messages is on my 5.3-BETA4 box. Andris Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.3-BETA4 #6: Tue Sep 14 17:21:45 EEST 2004 andris_at_audio.ldz.lv:/usr/obj/usr/src/sys/GENERIC Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz (2405.47-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf33 Stepping = 3 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA ,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> real memory = 536018944 (511 MB) avail memory = 514850816 (491 MB) ACPI APIC Table: <A M I OEMAPIC > ioapic0 <Version 2.0> irqs 0-23 on motherboard npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <A M I OEMXSDT> on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: <ACPI CPU> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <Intel 82865 host to AGP bridge> mem 0xfc000000-0xfdffffff at device 0.0 on pci0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pcib1: could not get PCI interrupt routing table for \\_SB_.PCI0.P0P1 - AE_NOT_FOUND pci1: <ACPI PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xef00-0xef1f irq 16 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xef20-0xef3f irq 19 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xef40-0xef5f irq 18 at device 29.2 on pci0 uhci2: [GIANT-LOCKED] usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xef80-0xef9f irq 16 at device 29.3 on pci0 uhci3: [GIANT-LOCKED] usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3 usb3: USB revision 1.0 uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered pci0: <serial bus, USB> at device 29.7 (no driver attached) pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci2: <ACPI PCI bus> on pcib2 skc0: <3Com 3C940 Gigabit Ethernet> port 0xd800-0xd8ff mem 0xfbefc000-0xfbefffff irq 22 at device 5.0 on pci2 skc0: 3Com Gigabit LOM (3C940) sk0: <Marvell Semiconductor, Inc. Yukon> on skc0 sk0: Ethernet address: 00:0c:6e:d7:e5:3a miibus0: <MII bus> on sk0 e1000phy0: <Marvell 88E1000 Gigabit PHY> on miibus0 e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto atapci0: <SiI 0680 UDMA133 controller> port 0xdf90-0xdf9f,0xdfa8-0xdfab,0xdfa0-0xdfa7,0xdfac-0xdfaf,0xdfe0-0xdfe7 mem 0xfbefbc00-0xfbefbcff irq 2 1 at device 9.0 on pci2 ata2: channel #0 on atapci0 ata3: channel #1 on atapci0 atapci1: <SiI 0680 UDMA133 controller> port 0xdf50-0xdf5f,0xdf80-0xdf83,0xdf68-0xdf6f,0xdf84-0xdf87,0xdf88-0xdf8f mem 0xfbefb800-0xfbefb8ff irq 2 2 at device 10.0 on pci2 ata4: channel #0 on atapci1 ata5: channel #1 on atapci1 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci2: <Intel ICH5 UDMA100 controller> port 0xfc00-0xfc0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0 ata0: channel #0 on atapci2 ata1: channel #1 on atapci2 pci0: <serial bus, SMBus> at device 31.3 (no driver attached) pci0: <multimedia, audio> at device 31.5 (no driver attached) acpi_button0: <Power Button> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A sio1 port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/9 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 orm0: <ISA Option ROM> at iomem 0xc0000-0xcafff on isa0 pmtimer0 on isa0 fdc0: ready for input in output fdc0: cmd 3 failed at out byte 1 of 3 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 2405466324 Hz quality 800 Timecounters tick every 10.000 msec ad0: 19092MB <ST320414A/3.28> [38792/16/63] at ata0-master UDMA100 ad4: 286103MB <Maxtor 5A300J0/RAMB1TV0> [581290/16/63] at ata2-master UDMA133 ad6: 286103MB <Maxtor 5A300J0/RAMB1TV0> [581290/16/63] at ata3-master UDMA133 ad8: 286103MB <Maxtor 5A300J0/RAMB1TV0> [581290/16/63] at ata4-master UDMA133 ad10: 286103MB <Maxtor 5A300J0/RAMB1TV0> [581290/16/63] at ata5-master UDMA133 Mounting root from ufs:/dev/ad0s1a ad4: WARNING - WRITE_DMA UDMA ICRC error (retrying request) LBA=63 ad4: WARNING - WRITE_DMA UDMA ICRC error (retrying request) LBA=63 ad4: FAILURE - WRITE_DMA status=51<READY,DSC,ERROR> error=84<ICRC,ABORTED> LBA=63 --> -----Original Message----- --> From: owner-freebsd-current_at_freebsd.org [mailto:owner-freebsd- --> current_at_freebsd.org] On Behalf Of DanGer --> Sent: Wednesday, September 15, 2004 10:13 AM --> To: current_at_freebsd.org --> Subject: Re: ad0: TIMEOUT - READ_DMA retrying (2 retries left) --> LBA=207594611 --> --> Hello FUJITA, --> --> Tuesday, September 14, 2004, 7:14:27 PM, you wrote: --> --> > Hi, --> --> > My 6.0-CURRENT box says, such as --> --> > ad0: TIMEOUT - READ_DMA retrying (2 retries left) LBA=207594611 --> > ad0: WARNING - READ_DMA no interrupt but good status --> --> > I replaced the ad0 with brand-new HDD, but I still got same messages. --> --> > The box has 3 HDDs(ad0,ad1,ad3) and DVD(acd0) drive, but the messages --> > comes only from ad0. --> --> > What is happening? --> > Cable problem or ATA controller problem? --> --> I'm getting this errors too on 5.2.1, so I don't know what's going on. --> The HDD is about 3 a 2 months old and not under big load. --> And my box uses to freeze because of these errors... --> --> here is my dmesg: --> --> Copyright (c) 1992-2004 The FreeBSD Project. --> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 --> The Regents of the University of California. All rights --> reserved. --> FreeBSD 5.2.1-RELEASE-p9 #0: Thu Aug 5 09:31:46 CEST 2004 --> danger_at_daemon.rulez.sk:/usr/obj/usr/src/sys/daemon --> Preloaded elf kernel "/boot/kernel/kernel" at 0xc07aa000. --> Timecounter "i8254" frequency 1193182 Hz quality 0 --> CPU: Intel(R) Celeron(TM) CPU 1100MHz (1116.83-MHz 686- --> class CPU) --> Origin = "GenuineIntel" Id = 0x6b1 Stepping = 1 --> --> Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,C --> MOV,PAT,PSE36,MMX,FXSR,SSE> --> real memory = 402587648 (383 MB) --> avail memory = 384618496 (366 MB) --> Pentium Pro MTRR support enabled --> acpi0: <IntelR AWRDACPI> on motherboard --> pcibios: BIOS version 2.10 --> Using $PIR table, 12 entries at 0xc00fd950 --> acpi0: Power Button (fixed) --> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 --> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 --> acpi_cpu0: <CPU> on acpi0 --> acpi_tz0: <Thermal Zone> on acpi0 --> acpi_button0: <Power Button> on acpi0 --> acpi_button1: <Sleep Button> on acpi0 --> pcib0: <ACPI Host-PCI bridge> port 0x4000-0x40f7,0xcf8-0xcff on acpi0 --> pci0: <ACPI PCI bus> on pcib0 --> pcib0: slot 31 INTD is routed to irq 11 --> pcib0: slot 31 INTC is routed to irq 9 --> pcib0: slot 31 INTB is routed to irq 5 --> agp0: <Intel 82815 (i815 GMCH) host to PCI bridge> mem 0xd0000000- --> 0xd3ffffff at device 0.0 on pci0 --> pcib1: <PCI-PCI bridge> at device 1.0 on pci0 --> pci1: <PCI bus> on pcib1 --> pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 --> pci2: <ACPI PCI bus> on pcib2 --> pcib2: slot 0 INTA is routed to irq 12 --> pcib2: slot 2 INTA is routed to irq 5 --> pcib2: slot 6 INTA is routed to irq 11 --> xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0x9000-0x907f mem --> 0xd9000000-0xd900007f irq 12 at device 0.0 on pci2 --> xl0: Ethernet address: 00:04:76:14:be:1d --> miibus0: <MII bus> on xl0 --> xlphy0: <3c905C 10/100 internal PHY> on miibus0 --> xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto --> pci2: <display, VGA> at device 2.0 (no driver attached) --> atapci0: <HighPoint HPT370 UDMA100 controller> port 0xa400- --> 0xa4ff,0xa000-0xa003,0x9c00-0x9c07,0x9800-0x9803,0x9400-0x9407 irq 11 at --> device 6.0 on pci2 --> atapci0: [MPSAFE] --> ata2: at 0x9400 on atapci0 --> ata2: [MPSAFE] --> ata3: at 0x9c00 on atapci0 --> ata3: [MPSAFE] --> isab0: <PCI-ISA bridge> at device 31.0 on pci0 --> isa0: <ISA bus> on isab0 --> atapci1: <Intel ICH2 UDMA100 controller> port 0xf000-0xf00f at device --> 31.1 on pci0 --> ata0: at 0x1f0 irq 14 on atapci1 --> ata0: [MPSAFE] --> ata1: at 0x170 irq 15 on atapci1 --> ata1: [MPSAFE] --> pci0: <serial bus, USB> at device 31.2 (no driver attached) --> pci0: <serial bus, SMBus> at device 31.3 (no driver attached) --> pci0: <serial bus, USB> at device 31.4 (no driver attached) --> pci0: <multimedia, audio> at device 31.5 (no driver attached) --> fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port --> 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 --> fdc0: FIFO enabled, 8 bytes threshold --> sio0 port 0x3f8-0x3ff irq 4 on acpi0 --> sio0: type 16550A --> sio1 port 0x2f8-0x2ff irq 3 on acpi0 --> sio1: type 16550A --> npx0: [FAST] --> npx0: <math processor> on motherboard --> npx0: INT 16 interface --> orm0: <Option ROMs> at iomem 0xc8000-0xc87ff,0xc0000-0xc7fff on isa0 --> pmtimer0 on isa0 --> atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 --> sc0: <System console> at flags 0x100 on isa0 --> sc0: VGA <16 virtual consoles, flags=0x300> --> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on --> isa0 --> Timecounter "TSC" frequency 1116829062 Hz quality 800 --> Timecounters tick every 10.000 msec --> ipfw2 initialized, divert disabled, rule-based forwarding enabled, --> default to accept, logging disabled --> IP Filter: v3.4.31 initialized. Default = pass all, Logging = enabled --> acpi_cpu: throttling enabled, 2 steps (100% to 50.0%), currently 100.0% --> ata0-master: DMA limited to UDMA33, non-ATA66 cable or device --> GEOM: create disk ad0 dp=0xc3b11e60 --> ad0: 194481MB <Maxtor 6Y200P0> [395136/16/63] at ata0-master UDMA33 --> acd0: CDROM <SAMSUNG CD-ROM SC-148C> at ata0-slave PIO4 --> Mounting root from ufs:/dev/ad0s1a --> WARNING: /data was not properly dismounted --> WARNING: /tmp was not properly dismounted --> WARNING: /usr was not properly dismounted --> WARNING: /var was not properly dismounted --> Accounting enabled --> ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=161995103 --> ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=3609119 --> ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=3610303 --> ad0: WARNING - WRITE_DMA UDMA ICRC error (retrying request) LBA=21064831 --> ad0: WARNING - WRITE_DMA UDMA ICRC error (retrying request) LBA=21064831 --> ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=3941919 --> ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=3942047 --> ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=3942751 --> ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=3942751 --> ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=3943263 --> ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=3943263 --> ad0: FAILURE - READ_DMA status=51<READY,DSC,ERROR> --> error=84<ICRC,ABORTED> LBA=3943263 --> ad0: WARNING - WRITE_DMA UDMA ICRC error (retrying request) LBA=21064383 --> ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=3767239 --> ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=3767063 --> ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=3767063 --> ad0: FAILURE - READ_DMA status=51<READY,DSC,ERROR> --> error=84<ICRC,ABORTED> LBA=3767063 --> spec_getpages:(ad0s1e) I/O read failure: (error=5) bp 0xcb6d98c8 vp --> 0xc3c0c514 --> size: 65536, resid: 65536, a_count: 65536, valid: 0x0 --> nread: 0, reqpage: 7, pindex: 142, pcount: 16 --> --> --> -- --> Best regards --> --> +----------==/\/\==----------+ --> | DanGer <danger_at_wilbury.sk> | --> | DanGer_at_IRCnet ICQ261701668 | --> | http://danger.homeunix.org | --> +----------==\/\/==----------+ --> --> _______________________________________________ --> freebsd-current_at_freebsd.org mailing list --> http://lists.freebsd.org/mailman/listinfo/freebsd-current --> To unsubscribe, send any mail to "freebsd-current- --> unsubscribe_at_freebsd.org"Received on Wed Sep 15 2004 - 07:29:38 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:12 UTC